1. Introduction
Thank you for choosing the SUXIO Light Therapy Lamp. This device is designed to provide bright light therapy, simulating natural daylight to support well-being. It features adjustable brightness levels, a timer function, and a memory function for personalized use. Please read this manual thoroughly before operation to ensure safe and effective use.
2. Safety Information
- Power Adapter: Always use a 5V-2A adapter for optimal performance. Using a 5V-1A adapter may cause malfunctions such as automatic shutdown or flickering at higher brightness settings.
- Placement: Position the lamp on a stable, flat surface. Ensure it is not easily knocked over.
- Water Exposure: Do not expose the lamp to water or operate it in damp environments.
- Children and Pets: Keep the device out of reach of children and pets.
- Medical Advice: This product is not intended to diagnose, treat, cure, or prevent any disease. Consult a healthcare professional if you have any medical conditions or concerns about light therapy.
- UV-Free: This lamp is designed to be UV-free.
3. Package Contents
- SUXIO Light Therapy Lamp (Model: HappyLamp-1)
- USB Cable (49 inches)
- Adjustable Standing Stand
- User Manual
Note: Power adapter is not included. Please use a 5V-2A adapter.
4. Product Overview
The SUXIO Light Therapy Lamp features a sleek, ultra-thin design with intuitive touch controls. It is equipped with 100 LEDs for flicker-free and glare-free illumination.
Image 4.1: Front view of the SUXIO Light Therapy Lamp, showing the light panel and touch control buttons at the bottom.
Controls:
- Lux Buttons (4000, 7000, 10000): Select desired brightness level.
- Power Button: Turns the lamp on or off.
- Timer Button: Activates and cycles through timer settings (30, 60, 90 minutes).
Image 4.2: The lamp shown with its integrated adjustable stand, demonstrating a 40-degree tilt for optimal positioning.
5. Setup
- Unpack: Carefully remove all components from the packaging.
- Position the Stand: Extend the integrated standing stand at the back of the lamp to your desired angle. The stand allows for flexible positioning on a desk or table.
- Connect Power: Insert the USB cable into the lamp's USB port. Connect the other end of the USB cable to a 5V-2A USB power adapter (not included), a power bank, or a computer USB port.
Image 5.1: The light therapy lamp connected via its 49-inch USB cable to a charger, power bank, and laptop, illustrating its versatile power options.
Important: Ensure your power source provides 5V-2A for stable operation.
6. Operating Instructions
6.1 Power On/Off
- To Turn On: Touch the Power Button (⏻). The lamp will gradually increase brightness to the last used setting.
- To Turn Off: Touch the Power Button (⏻) again.
Image 6.1: Illustration showing the lamp's gradual brightness increase from a low setting (4000 Lux) to a high setting (10000 Lux) over approximately 2 seconds upon activation.
6.2 Brightness Modes
The lamp offers three brightness levels:
- 4000 Lux: Gentle illumination.
- 7000 Lux: Moderate illumination.
- 10000 Lux: Maximum illumination, recommended for effective light therapy.
To Adjust Brightness: Touch the corresponding Lux button (4000, 7000, or 10000) to select your desired intensity. The lamp will adjust to the chosen level.
Image 6.2: Visual representation of the three distinct brightness levels (4000 Lux, 7000 Lux, 10000 Lux) available on the SUXIO Light Therapy Lamp.
6.3 Timer Function
The lamp includes a timer to automatically turn off after a set duration:
- 30 Minutes
- 60 Minutes
- 90 Minutes
To Set Timer: Touch the Timer Button (◷) repeatedly to cycle through the 30, 60, and 90-minute options. An indicator light will illuminate next to the selected time. To deactivate the timer, cycle through until no timer indicator is lit.
6.4 Memory Function
The lamp features a memory function that remembers your last brightness and timer settings. When you turn the lamp on, it will automatically resume operation with the settings used during the previous session.
7. Maintenance and Care
- Cleaning: Ensure the lamp is unplugged before cleaning. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners or solvents.
- Storage: Store the lamp in a cool, dry place when not in use.
- Handling: Handle the lamp with care to avoid damage to the light panel or internal components.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp automatically shuts down or flickers at high brightness. | Using a 5V-1A adapter instead of 5V-2A. | Replace the power adapter with a 5V-2A adapter. |
| Lamp does not turn on. | No power connection or faulty cable/adapter. | Check if the USB cable is securely connected. Ensure the power adapter is plugged into a working outlet and provides 5V-2A. Try a different USB port or adapter. |
| Brightness levels are not changing. | Buttons not pressed correctly or internal issue. | Ensure you are firmly touching the correct Lux button. If the issue persists, contact customer support. |
9. Specifications
- Model: HappyLamp-1
- Dimensions: 0.59"D x 5.11"W x 6.8"H (Approximately 1.5 cm D x 13 cm W x 17.3 cm H)
- Weight: 0.63 ounces (Approximately 17.8 grams)
- Light Output: 4000 Lux, 7000 Lux, 10000 Lux
- Color Temperature: 6500 Kelvin
- Wattage: 12 watts
- Bulb Voltage: 5 volts
- Power Input: USB (Requires 5V-2A adapter, not included)
- LEDs: 100 LEDs
- Features: 3 Brightness Modes, 3 Timer Settings (30/60/90 min), Memory Function, Touch Control, Portable Design
Image 9.1: Diagram illustrating the physical dimensions of the SUXIO Light Therapy Lamp.
10. Warranty and Support
SUXIO products are manufactured with quality and reliability in mind. For any product-related inquiries, technical support, or warranty claims, please contact SUXIO customer service through the retailer's platform or the contact information provided with your purchase. Please retain your proof of purchase for warranty purposes.
We are committed to ensuring your satisfaction with our products.