1. Product Overview
The PURELL Professional Redifoam Fragrance-Free Foam Soap is designed for use with the PURELL CXR REDIFOAM Dispensing Fixture. This unique, self-preserved foam soap formulation helps maintain the cleanliness and clog-free operation of the dispensing fixture. It is a fragrance-free solution, suitable for various professional environments.
2. Setup and Refill Instructions
Follow these steps to properly install or replace the PURELL Professional Redifoam Foam Soap refill in your compatible dispenser.
Image: Visual guide for refilling the PURELL dispenser. This image illustrates the five-step process for replacing the soap refill, including unlocking the dispenser, removing the old cartridge, inserting the new cartridge, and securing the dispenser.
- Step 1: Access the Dispenser. Locate the keyhole or release mechanism on your PURELL CXR REDIFOAM Dispensing Fixture.
- Step 2: Unlock the Dispenser. Insert the dispenser key (if applicable) into the keyhole and press down or turn to unlock and open the dispenser cover.
- Step 3: Remove the Old Refill. Carefully pull the empty or used soap refill bottle downwards and out of the dispenser housing.
- Step 4: Insert the New Refill. Align the new PURELL Professional Redifoam Foam Soap refill with the dispenser's opening. Push the new bottle firmly upwards until it clicks securely into place. Ensure the pump mechanism is properly seated.
- Step 5: Close and Secure. Close the dispenser cover until it latches securely. Remove the key if used. The dispenser is now ready for use.
3. Operating Instructions
Once the PURELL Professional Redifoam Foam Soap refill is correctly installed in a compatible PURELL CXR REDIFOAM Dispensing Fixture, operation is straightforward:
- Place your hand under the dispenser's nozzle.
- The dispenser will automatically dispense a measured amount of foam soap.
- Rub hands together thoroughly for at least 20 seconds, ensuring all surfaces are covered.
- Rinse hands with water and dry thoroughly.
4. Maintenance
The PURELL Professional Redifoam Foam Soap is formulated to help keep your dispenser clean. Regular maintenance includes:
- Refill Replacement: Replace the soap refill cartridge when the dispenser indicates a low soap level (refer to Troubleshooting section).
- Exterior Cleaning: Periodically wipe down the exterior of the dispenser with a clean, damp cloth to remove dust and residue. Avoid using abrasive cleaners.
- Battery Replacement: If your dispenser is battery-operated, replace batteries when indicated by the dispenser's light (refer to Troubleshooting section).
5. Troubleshooting
Refer to the indicator lights on your PURELL CXR REDIFOAM Dispensing Fixture for common issues:
| Indicator Light | Meaning | Action |
|---|---|---|
| Flashing Yellow | Low Soap Reserve | Replace the soap refill cartridge. |
| Flashing Red | Refill Issue | Ensure the refill cartridge is correctly seated and locked into the dispenser. Re-insert if necessary. |
| Solid Red | Low Batteries | Replace the batteries in your dispenser. |
If issues persist after following these steps, please contact customer support.
6. Specifications
- Brand: Purell
- Product Name: Professional Redifoam Fragrance-Free Foam Soap
- Volume: 2,000 ml per refill (4 refills per carton)
- Scent: Unscented
- Item Form: Liquid (foaming)
- Item Weight (Carton): Approximately 18.5 pounds
- Carton Dimensions (L x W x H): 11.25 x 8.5 x 11.25 inches
- Compatibility: Designed for PURELL CXR REDIFOAM Dispensing Fixtures
- GTIN: 10073852514961
- ASIN: B0BCV8WF7H
7. Warranty and Support
Specific warranty information for the PURELL Professional Redifoam Fragrance-Free Foam Soap refill is typically provided with the dispensing fixture or by the manufacturer. Please refer to the documentation accompanying your PURELL dispenser for warranty details.
For technical support or further assistance, please contact Purell customer service through their official website or the contact information provided with your product purchase.
