Product Overview
The WOLFSTORM Front Fender Flares are designed to enhance the appearance and protection of your Jeep Wrangler JL/JLU and Jeep Gladiator JT. Constructed from heavy-duty steel with a black powder-coated finish, these flares offer durability and corrosion resistance. They feature integrated LED sequential turn signal lights and LED side marker lights for improved visibility and a distinctive look.
Key Features:
- Compatibility: Specifically designed for 2018-2025 Jeep Wrangler JL Unlimited 2-Door & 4-Door, and 2019-2025 Jeep Gladiator JT.
- Integrated Lighting: Equipped with LED sequential turn signal lights and LED side marker lights (DOT & SAE compliant).
- Durable Construction: Made from high-quality heavy-duty carbon steel with a black powder-coated finish for corrosion resistance.
- Easy Installation: Bolt-on design utilizing original factory mounting locations, requiring no modifications.
Image: The WOLFSTORM Front Fender Flares, showcasing their design and integrated lighting elements.
Package Contents
Upon opening the package, verify that all components are present and undamaged. The package should contain:
- 2 x Front Wheel Flares (Left and Right)
- 1 x Set of Mounting Hardware (bolts, washers, nuts, zip ties)
Image: Contents of the WOLFSTORM Front Fender Flares package, showing the two fender flares and the accompanying hardware kit for installation.
Compatibility and Fitment
These front fender flares are specifically designed for the following Jeep models:
- Jeep Wrangler JL Unlimited (2-Door & 4-Door): 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025 models.
- Jeep Gladiator JT: 2019, 2020, 2021, 2022, 2023, 2024, 2025 models.
Image: A visual guide indicating the compatibility of the fender flares with 2019-2023 Jeep Gladiator JT models, confirming fitment for both 2-door and 4-door configurations.
Setup and Installation
Installation of the WOLFSTORM Front Fender Flares is a direct bolt-on process, requiring no drilling or modifications to your vehicle. Follow these steps carefully for proper installation:
- Preparation: Park your vehicle on a level surface and engage the parking brake. Turn off the engine and disconnect the negative terminal of the battery to prevent electrical issues during installation, especially when dealing with the LED lights.
- Remove Existing Fender Flares (if applicable): If your vehicle has existing fender flares, carefully remove them according to your vehicle's service manual. Keep any reusable hardware organized.
- Position New Fender Flare: Align the new WOLFSTORM Front Fender Flare with the original mounting points on your vehicle's fender. Ensure a snug fit.
- Secure with Hardware: Use the provided mounting hardware (bolts, washers, nuts) to secure the fender flare to the vehicle. Start by hand-tightening all bolts, then progressively tighten them with appropriate tools. Do not overtighten.
- Wiring the LED Lights: Locate the existing turn signal and position light wiring on your vehicle. Connect the wires from the new LED sequential turn signal lights and LED side marker lights to the corresponding vehicle wiring. It is recommended to use proper electrical connectors and ensure all connections are secure and insulated. Refer to your vehicle's wiring diagram if unsure.
- Test Lights: Reconnect the vehicle battery. Test the turn signals and position lights to ensure they function correctly.
- Repeat for Other Side: Follow the same steps for the opposite side fender flare.
- Final Check: Double-check all bolted connections for tightness and ensure all wiring is neatly routed and secured, away from moving parts or heat sources.
Image: An illustration highlighting the original factory mounting locations on the fender flares, indicating where the included hardware will be used for a bolt-on installation without drilling.
Operating Instructions (LED Lights)
The integrated LED lights operate in conjunction with your vehicle's existing lighting system. No special controls are required for their operation beyond your vehicle's standard turn signal and headlight switches.
- Sequential Turn Signals: When the turn signal is activated, the amber LEDs will illuminate in a sequential pattern, providing a clear and modern indication of your turning intention.
- Position Lights: The white LED position lights will illuminate when your vehicle's parking lights or headlights are on, enhancing visibility.
Image: Detailed view of the integrated LED sequential turn signal lights, demonstrating their progressive illumination pattern.
Image: A composite image showing close-ups of the LED light components, including the wiring, the sequential turn signal strip, and the DOT/SAE compliant side marker light.
Maintenance
To ensure the longevity and appearance of your WOLFSTORM Front Fender Flares, follow these maintenance guidelines:
- Regular Cleaning: Clean the fender flares regularly with mild automotive soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coated finish.
- Inspect Fasteners: Periodically check all mounting bolts and connections to ensure they remain tight. Vibrations from driving can sometimes loosen fasteners over time.
- Inspect Wiring: Check the LED light wiring for any signs of wear, fraying, or loose connections. Ensure all connections remain waterproof.
- Damage Inspection: After off-road use or impacts, inspect the flares for any damage, such as dents, scratches, or cracks. Address any damage promptly to prevent further deterioration.
- Rust Prevention: Although the flares are powder-coated for corrosion resistance, minor scratches or chips in the coating can expose the steel. Touch up any deep scratches with appropriate automotive paint to prevent rust.
Image: An exploded view diagram showing the layers of the fender flare material, including excellent density carbon steel, advanced electrophoresis, and high-grade textured black powder coating, contributing to its rust resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights not working | Loose or incorrect wiring connection. Blown fuse in vehicle's electrical system. Damaged LED unit. | Check all wiring connections for proper contact and insulation. Verify correct polarity. Inspect vehicle's fuse box for blown fuses related to lighting and replace if necessary. If wiring is correct and fuse is good, the LED unit may be faulty and require replacement. |
| Fender flare feels loose after installation | Mounting bolts are not sufficiently tightened. Incorrect installation of hardware. | Re-tighten all mounting bolts securely, ensuring they are torqued to an appropriate level without overtightening. Review installation steps to confirm all hardware was used correctly. |
| Fender flare does not fit correctly | Incorrect product for vehicle model/year. Obstruction preventing proper seating. | Verify your vehicle's make, model, and year against the product's compatibility list. Check for any debris or existing vehicle components that might be obstructing the flare's fit. |
If you encounter issues not listed here or require further assistance, please contact WOLFSTORM customer support.
Specifications
| Attribute | Detail |
|---|---|
| Brand | WOLFSTORM |
| Model | Front Fender Flares |
| Part Number | NO-WX-WSAJT01H101-BX-F |
| Compatibility | 2018-2025 Jeep Wrangler JL/JLU, 2019-2025 Jeep Gladiator JT |
| Material | Heavy Duty Carbon Steel |
| Finish | Black Powder Coated |
| Lighting Type | LED Sequential Turn Signal Light & Position Light |
| Installation Type | Bolt-On |
| Item Weight | 31.7 pounds |
| Dimensions (Approximate) | 44.3 x 19.8 x 12.3 inches |
Image: A technical drawing illustrating the approximate dimensions of the WOLFSTORM Front Fender Flares, including length, height, and width.
Warranty and Support
All WOLFSTORM products come with a one-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
What the Warranty Covers:
- Defects in materials and workmanship.
- Product failure due to manufacturing errors.
What the Warranty Does NOT Cover:
- Damage caused by improper installation or modification.
- Damage from accidents, misuse, abuse, or neglect.
- Normal wear and tear.
- Damage from off-road impacts or environmental factors not related to manufacturing defects.
For warranty claims or technical support, please contact WOLFSTORM customer service. Provide your purchase details and a description of the issue for efficient assistance.
Contact Information: Please refer to the seller's contact information on your purchase receipt or the official WOLFSTORM website for the most up-to-date support channels.
