EleksTube IPS PRO Digital Clock User Manual

1. Product Overview

The EleksTube IPS PRO is an upgraded digital clock that blends innovative technology with vintage aesthetics. It features 6 LCD screens housed within delicate glass tubes, simulating the classic Nixie tube display. This smart digital clock not only displays time and date but also allows for custom photo displays and offers multiple display options. It is powered by USB and supports Wi-Fi for automatic time synchronization.

• Nixie Clock Simulation: Features 6 LCD screens covered by glass tubes, simulating the classic Nixie tube glow.
• Multiple Display Options: Choose from over 20 pre-set display options or customize your own via software.
• Smart Digital Clock: Displays time, date, and can function as an electronic photo album by uploading personal images.
• User-Friendly Design: USB powered with Wi-Fi support for automatic time zone synchronization.
• Durable Build: Inherits a classic design with a stronger anodized aluminum base.

2. Setup Guide

Follow these steps to assemble and power on your EleksTube IPS PRO Digital Clock:

1. Unpack Components: Carefully remove all components from the packaging. You should have the main base unit, six LCD screens, and six glass tubes.
2. Insert LCD Screens: Gently take each of the six LCD screens and insert them into the designated slots on the top of the base unit. Ensure they are seated firmly.
3. Attach Glass Tubes: Place each glass tube over its corresponding LCD screen. The base of the glass tube is designed to fit securely over the LCD screen's base.
4. Connect Power: Use the provided USB-A to USB-C cable. Plug the USB-C end into the port on the side of the EleksTube IPS PRO base unit and the USB-A end into a standard USB power adapter (not included) or a computer USB port.

Image: All components of the EleksTube IPS PRO Digital Clock laid out before assembly.

Image: Close-up view of an LCD screen being gently inserted into its slot on the base unit.

Image: A glass tube being placed over an inserted LCD screen, completing the display unit.

Image: The USB-C port on the side of the device where the power cable is connected.

3. Operating Instructions

The EleksTube IPS PRO features intuitive controls for adjusting settings and display modes.

Controls:

The device has a power button and three additional buttons for navigation and settings adjustment: Mode, Left, and Right.

Image: The control buttons located on the back of the EleksTube IPS PRO base unit.

• Power Button: Turns the device on or off.
• Mode Button: Cycles through different display modes (e.g., time, date, photo display, retro setting).
• Left/Right Buttons: Used to navigate through options within a selected mode, such as changing time, date, or color settings.

Display Customization:

The EleksTube IPS PRO supports various display options and customization through its smart software. You can modify clock images, choose from over 20 pre-set options, and even upload your own photos to be displayed on the LCD screens.

For advanced customization and photo uploading, refer to the official EleksMaker software, typically available for download from the manufacturer's website. The device's Wi-Fi capability allows for automatic time synchronization, eliminating the need for manual time adjustments.

4. Maintenance

To ensure the longevity and optimal performance of your EleksTube IPS PRO Digital Clock, follow these maintenance guidelines:

• Cleaning: Use a soft, dry, lint-free cloth to gently wipe the glass tubes and the aluminum base. Avoid abrasive cleaners or solvents that could damage the surfaces.
• Handling: Handle the device with care, especially when inserting or removing the LCD screens and glass tubes. Avoid dropping or subjecting it to strong impacts.
• Power Supply: Always use the provided USB cable and a compatible power source. Do not use damaged cables or power adapters.
• Environment: Keep the clock in a dry environment, away from direct sunlight, extreme temperatures, and high humidity.

5. Troubleshooting

If you encounter any issues with your EleksTube IPS PRO, try the following troubleshooting steps:

• Clock Not Powering On:
  • Ensure the USB-C cable is securely connected to both the device and the power source.
  • Try a different USB port or power adapter to rule out a faulty power source.
  • Verify that the power button on the device is pressed.
• Incorrect Time/Date:
  • If Wi-Fi is enabled, ensure the device is connected to a stable internet connection for automatic synchronization.
  • Manually adjust the time and date using the control buttons as described in the Operating Instructions.
• Display Issues (e.g., blank screens, flickering):
  • Gently re-seat the LCD screens to ensure they are properly connected to the base unit.
  • Restart the device by unplugging and re-plugging the power cable.
• Software/Customization Problems:
  • Ensure you are using the latest version of the EleksMaker software.
  • Check for firmware updates for your device on the official EleksMaker website.

If these steps do not resolve the issue, please contact customer support for further assistance.

6. Specifications

7. Warranty and Support

Warranty information for the EleksTube IPS PRO Digital Clock is not provided in the available product details. For specific warranty terms, technical support, or service inquiries, please refer to the official EleksMaker website or contact their customer service directly.

You may also visit the EleksMaker Store on Amazon for additional product information and support resources.