MICRO-AIR 350 Black

MICRO-AIR EasyTouch RV Thermostat User Manual

Model: 350 Black

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your MICRO-AIR EasyTouch Digital WiFi or Bluetooth Thermostat. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your comfort and convenience in your recreational vehicle.

MICRO-AIR EasyTouch RV Thermostat 350 Black in packaging

Figure 1: The MICRO-AIR EasyTouch RV Thermostat 350 Black, shown in its retail packaging alongside the device itself. This image highlights the product's branding and model number.

Setup and Installation

Proper installation is crucial for optimal performance. Follow these steps carefully.

1. Choosing the Right Model

Ensure you have selected the correct EasyTouch model for your RV's existing thermostat. Refer to the model guide provided by the manufacturer to confirm compatibility.

Model compatibility guide for MICRO-AIR EasyTouch RV Thermostat

Figure 2: A visual guide demonstrating how to identify your current RV thermostat and match it with the corresponding EasyTouch model for compatibility.

2. Removing the Old Thermostat

Before beginning, ensure all power to the RV's HVAC system is disconnected. Depress the rectangular locking tab on the bottom of the old thermostat with a small screwdriver. Gently pull the thermostat away from the wall from the bottom. Unplug the connector by depressing the locking tab. Remove any back plate mounting screws and the back plate.

3. Wiring the Thermostat

The EasyTouch thermostat features a simple telephone-style modular jack. This is a six-pin version of a common Ethernet connector with a press tab for removing the connector. Connect the wiring from your RV to the new thermostat's modular jack. Ensure a secure connection.

4. Mounting the New Thermostat

  1. Locate the mounting buttons horizontally across the hole with the smaller diameter against the wall.
  2. Screw in one screw and level the buttons so the display will be straight when installed.
  3. Screw in the second screw, ensuring both buttons remain level.
  4. Remove the mounting tab before mounting the display unit on the wall.
  5. Align the display and press it against the wall, then gently slide the display down to lock it in place.
Installation steps for mounting the EasyTouch RV Thermostat

Figure 3: Step-by-step visual instructions for mounting the EasyTouch RV Thermostat to the wall.

Operating Instructions

Touch Screen Interface

The EasyTouch thermostat features a large, colored touch screen for intuitive control. The display shows current temperature, set temperature, and outside temperature (if applicable). Icons represent various functions such as Wi-Fi, Bluetooth, scheduling, and alarms.

Close-up of the EasyTouch RV Thermostat's large color touch screen

Figure 4: A detailed view of the EasyTouch RV Thermostat's large, colored touch screen, highlighting its clear display and user-friendly interface.

Wireless App Access (WiFi & Bluetooth)

Control your RV's climate remotely using the EasyTouch RV smartphone application. The app allows you to monitor and adjust the air conditioner, furnace, and heat pump from anywhere with Wi-Fi or Bluetooth connectivity. Free feature updates are available via Wi-Fi.

Smartphone displaying the EasyTouch RV app for remote control

Figure 5: A smartphone screen showing the EasyTouch RV application, illustrating its remote control capabilities for managing RV climate settings.

System Modes and Zones

The thermostat automatically detects system sources such as furnace, heat strip, and cooling. It supports multiple zones, allowing independent temperature control for different areas of your RV. You can switch between zones directly on the thermostat or via the app.

Programming Schedules

The thermostat is programmable, allowing you to set custom heating and cooling schedules to optimize comfort and energy efficiency. Access scheduling options through the touch screen or the mobile app.

Maintenance

Cleaning the Thermostat

To clean the touch screen and exterior, use a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the display and finish. Ensure the thermostat is powered off before cleaning.

Firmware Updates

The EasyTouch RV thermostat supports free feature updates through Wi-Fi. Periodically check for and install available firmware updates via the mobile app to ensure your thermostat is equipped with the latest advancements and functionalities.

Troubleshooting

ProblemPossible CauseSolution
Thermostat not powering on.No power supply; incorrect wiring.Check RV's main power supply. Verify wiring connections as per installation instructions.
Cannot connect to Wi-Fi/Bluetooth.Incorrect network settings; out of range; interference.Ensure you are using a 2.4GHz Wi-Fi band. Move closer to the thermostat for Bluetooth connection. Check for other devices causing interference. Restart the thermostat and your mobile device.
Temperature readings are inaccurate.Sensor obstruction; thermostat placed in direct sunlight or near heat source.Ensure the thermostat's sensors are not obstructed. Relocate the thermostat if it's exposed to extreme conditions.
HVAC system not responding to commands.Incorrect system configuration; loose wiring.Verify system settings in the thermostat menu or app. Check all wiring connections for looseness.

Specifications

  • Brand: MICRO-AIR
  • Model Name: EasyTouch
  • Product Dimensions: 1"D x 4"W x 3"H
  • Controller Type: iOS (and Android via app)
  • Special Feature: Wi-Fi, Bluetooth
  • Color: Black (for this model)
  • Specific Uses For Product: Air Conditioner, Furnace, Heat Pump
  • Temperature Control Type: Programmable
  • Power Source: Battery Powered (for internal clock/settings, main power from RV)
  • Display Type: Touchscreen
  • Screen Size: 3 Inches
  • Mounting Type: Wall Mount

Warranty and Support

Warranty Information

The MICRO-AIR EasyTouch Thermostat comes with a 2-Year Limited Warranty. This warranty covers defects in materials and workmanship under normal use. For detailed terms and conditions, please refer to the official warranty documentation included with your product or contact Micro-Air customer support.

Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact Micro-Air customer support. Free smartphone application for remote access is included, and support is available through the manufacturer.

Manufacturer: Micro-Air

Contact Information: Refer to the official Micro-Air website or product packaging for the most current contact details.

© 2025 MICRO-AIR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.