1. Introduction
Thank you for choosing the Northpoint Lounge Lights LED Set. This set of four wireless, touch-controlled LED lights is designed to provide versatile accent and mood lighting for both indoor and outdoor environments. Featuring RGBW color changing capabilities and a realistic flickering effect, these lights are powered by rechargeable batteries and come with a convenient charging station.
Please read this manual carefully before using the product to ensure safe and optimal operation. Keep this manual for future reference.
Image 1.1: Northpoint Lounge Lights providing ambient lighting in an outdoor setting.
2. Safety Information
- Do not expose the lights or charging station to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the charging station is placed on a stable, flat surface away from water or moisture.
- Use only the provided USB cable and charging station. Using unauthorized accessories may damage the product and void the warranty.
- Do not attempt to open, disassemble, or modify the lights or charging station. This may result in electric shock or product damage.
- Keep out of reach of children and pets.
- Although the lights are waterproof, avoid submerging them in water.
3. Package Contents
Verify that all items listed below are included in your package:
- 4 x Northpoint LED Lounge Lights
- 1 x Charging Station
- 1 x USB Charging Cable
- 1 x User Manual (this document)
Image 3.1: All components included in the Northpoint Lounge Lights LED Set.
4. Setup
4.1 Initial Charging
- Place the charging station on a flat, stable surface.
- Connect the provided USB charging cable to the charging station and then to a compatible USB power adapter (not included) or a USB port.
- Carefully place each of the four lounge lights onto the charging pins of the charging station. Ensure they are seated correctly.
- Allow the lights to charge for approximately 5 to 7 hours before first use. The indicator lights on the charging station (if present) will show charging status.
4.2 Placement
The Northpoint Lounge Lights are designed for both indoor and outdoor use. Their wireless nature allows for flexible placement. They are ideal for:
- Terraces and balconies
- Gardens and patios
- Living rooms and bedrooms
- Dining tables and accent areas
Ensure the lights are placed on a stable surface. While waterproof, avoid placing them in areas where they might be fully submerged or exposed to extreme weather conditions for extended periods.
5. Operating Instructions
The Northpoint Lounge Lights feature a convenient touch sensor for control.
5.1 Power On/Off and Mode Selection
- To Turn On: Gently tap the touch sensor located on the bottom of each light. The light will illuminate in its last used mode or a default warm white flickering mode.
- To Change Light Mode: Continue to tap the touch sensor to cycle through the available light modes. The modes typically include:
- Warm White Flickering (candle effect)
- Warm White Steady
- RGBW Color Changing (smooth transition through colors)
- Fixed Color (tap during RGBW mode to select and hold a specific color)
- To Turn Off: Continue tapping through all modes until the light turns off, or press and hold the touch sensor for a few seconds.
Image 5.1: Activating the touch sensor on the base of the light.
6. Charging
The Northpoint Lounge Lights are powered by integrated rechargeable batteries. When the battery is low, the light output may diminish.
6.1 Charging Procedure
- Place the lights onto the charging station, ensuring proper contact with the charging pins.
- Connect the charging station to a USB power source using the provided cable.
- A full charge takes approximately 5 to 7 hours.
6.2 Battery Life
Once fully charged, the lights can operate for up to 22 hours in flickering mode, providing extended illumination for your events or ambiance.
7. Maintenance
7.1 Cleaning
To clean the lights and charging station, wipe them with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
7.2 Storage
When not in use for extended periods, store the lights and charging station in a cool, dry place. It is recommended to fully charge the lights before storing them and to recharge them every few months to maintain battery health.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is depleted. | Place the light on the charging station and charge for 5-7 hours. |
| Light does not charge. | Poor contact with charging pins. | Ensure the light is properly seated on the charging station. Check USB cable connection. |
| Light modes are not changing. | Touch sensor not responding. | Ensure your finger is clean and dry. Tap firmly but gently. Try turning the light off and on again. |
| Short battery life. | Not fully charged or battery degradation. | Ensure a full 5-7 hour charge. If the issue persists after multiple full charges, contact customer support. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | NP-ALL-Lounge-Parent |
| Dimensions (each light) | Approx. 5 cm (Diameter) x 7 cm (Height) |
| Weight (each light) | Approx. 85 grams (Total set approx. 340 grams) |
| Material | Plastic (Polypropylene or Polyethylene) |
| Finish | Matte Black |
| Light Source | Integrated LED (54SMD) |
| Light Modes | Warm White Flickering, Warm White Steady, RGBW Color Changing, Fixed Color |
| Control Method | Touch Sensor |
| Power Source | Rechargeable Battery |
| Charging Time | Approx. 5-7 hours |
| Operating Time (Flickering Mode) | Up to 22 hours |
| Connectivity | USB (for charging station) |
| Waterproof Level | Waterproof (suitable for outdoor use, not submersible) |
| Recommended Use | Indoor and Outdoor accent/mood lighting |
Image 9.1: Dimensions of the Lounge Lights and charging station.
10. Warranty and Support
Northpoint products are designed for quality and reliability. For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official Northpoint website.
Please retain your proof of purchase for any warranty claims.
