nanoblock Pokémon Milotic Building Kit

1. Introduction

The nanoblock Pokémon Milotic Building Kit allows you to construct a detailed micro-sized model of Milotic, the elegant Water-type Pokémon. This kit features 200 precisely manufactured pieces, with bricks as small as 4mm x 5mm, enabling the creation of intricate 3D art. The finished model stands approximately 2.36 inches tall, capturing Milotic's serpentine form and vibrant colors with astounding accuracy.

What's Included:

• Pokémon - Milotic, Pokémon Series building kit (200 pieces)
• Detailed step-by-step instruction manual

2. Safety Information

WARNING: CHOKING HAZARD - Small Parts. Not for children under 3 years.

This product contains very small parts which can pose a choking hazard. Keep all pieces out of reach of young children and pets. Recommended for ages 8 and up. Adult supervision is advised for younger builders.

3. Setup & Assembly

The nanoblock Milotic kit is rated at Difficulty Level 2 (on a scale of 1 to 5, with 1 being the easiest). This makes it an excellent entry-level kit for those new to nanoblocks or looking for a moderately challenging build.

Preparation:

1. Unpack all contents from the box.
2. Carefully open the bags containing the nanoblock pieces. It is recommended to sort the pieces by color and size to facilitate the building process.
3. Lay out the instruction manual on a flat, well-lit surface.

Assembly Steps:

Follow the detailed, step-by-step instructions provided in the manual. Each step illustrates which pieces to use and where to place them. Pay close attention to the orientation of each block.

• Begin by identifying the base pieces as indicated in the manual.
• Carefully click each miniature brick into place. The blocks are designed for a perfect fit, but gentle pressure may be needed.
• Work through the instructions sequentially, ensuring each layer is stable before proceeding to the next.
• Refer to the images in the manual frequently to verify your progress.

Figure 3.1: The product packaging for the nanoblock Pokémon Milotic Building Kit, displaying the finished Milotic model, the model number NBPM097, and indicating 200 pieces.

Figure 3.2: A side view of the fully assembled nanoblock Milotic model, showcasing its intricate design and vibrant colors.

Figure 3.3: This image demonstrates the compact size of the nanoblock Milotic model, fitting comfortably in the palm of a hand.

4. Operation

The primary operation of this nanoblock kit is the assembly process itself. Once assembled, the Milotic model serves as a display piece. There are no electronic or mechanical functions.

• Enjoy the process of bringing Milotic to life, brick by brick.
• Once completed, place your model on a stable surface for display.
• The model is designed for display and light handling. Avoid dropping or applying excessive force to prevent disassembly.

Figure 4.1: A display of three different nanoblock Pokémon models: Gardevoir, Milotic, and Aggron, highlighting the variety in the series.

Figure 4.2: The nanoblock Gardevoir, Milotic, and Aggron models arranged with a decorative potted plant, showing how they can be displayed.

5. Maintenance

To ensure the longevity and appearance of your nanoblock Milotic model, follow these simple maintenance guidelines:

• Cleaning: Gently wipe the model with a dry, soft cloth to remove dust. For more stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture.
• Storage: If disassembling for storage, keep all pieces in a sealed container to prevent loss and protect them from dust.
• Environment: Avoid exposing the model to direct sunlight for prolonged periods, as this may cause colors to fade. Keep away from extreme temperatures or high humidity.

6. Troubleshooting

If you encounter any issues during assembly, consider the following:

• Difficulty with a step: Double-check the instruction manual. Ensure you are using the correct pieces and that they are oriented as shown in the diagrams. Sometimes, rotating a piece or looking at the next step can clarify the current one.
• Pieces not fitting: Ensure the pieces are aligned correctly. nanoblocks are designed for a snug fit. Do not force pieces together, as this can damage them.
• Missing pieces: While rare, if you believe a piece is missing, carefully re-check all packaging and the area where you are building. If a piece is genuinely missing, refer to the 'Support' section for assistance.
• Model instability: Ensure all connections are firm. Sometimes a loose connection can affect the stability of subsequent layers.

7. Specifications

8. Warranty and Support

This nanoblock product is manufactured by Kawada. For any product-related inquiries, including missing parts or assembly assistance, please refer to the contact information provided on the product packaging or visit the official nanoblock website for customer support details.

Please retain your proof of purchase for any warranty claims or support requests.