Introduction
This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your WELOV P200 Pro Matter Smart Air Purifier. Please read this manual thoroughly before using the appliance and retain it for future reference.
Figure 1: WELOV P200 Pro Matter Smart Air Purifier.
Important Safety Instructions
To reduce the risk of fire, electric shock, or injury, please observe the following:
- Always unplug the air purifier before moving it, opening the grille, changing filters, or performing any cleaning.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- Use this air purifier only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Do not use outdoors.
- This air purifier is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the air purifier by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the air purifier.
Setup Guide
1. Unpacking
Carefully remove the air purifier from its packaging. Ensure all components are present: the main unit and the filter(s).
2. Filter Installation
The WELOV P200 Pro uses a large, medical-grade HEPA filter. To install or replace the filter:
- Unplug the air purifier from the power outlet.
- Turn the unit upside down.
- Twist the bottom cover counter-clockwise to unlock and remove it.
- Remove the old filter (if applicable) and insert the new filter into the unit. Ensure it is seated correctly.
- Replace the bottom cover and twist clockwise to lock it securely.
Figure 2: Illustration of the multi-layer filter system.
3. Placement
Place the air purifier on a firm, level surface. Ensure there is adequate space around the unit (at least 6 inches) for proper air circulation. Avoid placing it directly against walls or furniture.
4. Power Connection
Plug the power cord into a standard electrical outlet.
Operating Instructions
Control Panel Overview
Figure 3: User-friendly control panel with PM2.5 display, Night Light, Sleep Mode, On/Off, Auto Mode, Child Lock, Filter Replacement, Timer, and Fan Speed controls.
1. Power On/Off
Press the Power button () to turn the air purifier on or off.
2. Adjust Fan Speed
Press the Fan Speed button () repeatedly to cycle through different fan speeds (Low, Medium, High).
3. Auto Mode
Press the Auto Mode button () to activate Auto Mode. The purifier will automatically adjust fan speed based on real-time air quality (PM2.5) readings.
4. Sleep Mode
Activate Sleep Mode () for quiet operation (as low as 23dB) and dimmable lighting. This mode can sync with Apple Health for optimized fan levels based on your sleep patterns via the AiDot App.
Figure 4: Sleep Mode with Apple Health integration for personalized air purification.
5. Night Light
Press the Night Light button () to control the adjustable warm night light feature.
6. Timer
Use the Timer button () to set an operating duration for the air purifier.
7. Child Lock
Activate the Child Lock () to prevent accidental changes to settings.
8. Smart Connectivity (Matter 1.2 & AiDot App)
The WELOV P200 Pro supports Matter 1.2, allowing seamless integration with smart home ecosystems like Apple HomeKit, Google Home, Alexa, and SmartThings. Use the AiDot App for advanced features including:
- Sleep Mode with Apple Health synchronization.
- Voice Control (via Alexa, Google Assistant).
- Pollen/Wildfire Alerts.
- Energy Insight.
- PM2.5 Tracking.
- Filter Alert.
- Lighting Control.
Figure 5: Matter connectivity for integrated smart home control.
Figure 6: Hands-free voice control for convenient operation.
Maintenance
1. Filter Replacement
The air purifier's filter alert will indicate when it's time to replace the filter. Filter lifespan depends on usage and air quality. Typically, filters should be replaced every 6-8 months. Refer to the "Setup Guide" for filter replacement steps.
Figure 7: AiDot App filter alert notification.
2. Cleaning the Exterior
Wipe the exterior of the air purifier with a soft, dry cloth. Do not use abrasive cleaners or solvents.
3. Filter Types
The WELOV P200 Pro supports various filter types tailored to specific needs:
- Pet Care Filter: Enhanced H13 True HEPA filter customized for pet dander, hair, pollen, pet odor, and other allergens.
- Original Filter: Captures common airborne pollutants and allergens while neutralizing smokes and unwanted gases.
- Toxin Absorber Filter: Features 2X more Activated Carbon, specially designed for new homes with formaldehyde and helps to neutralize toxins, wildfire smoke, VOCs, and pollutant gases.
Figure 8: Available filter types for specialized air purification.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Air purifier does not turn on. | No power, power cord not properly connected. | Check power outlet, ensure power cord is securely plugged in. |
| Weak airflow. | Filter is dirty or clogged. | Replace the filter. |
| Unusual noise. | Obstruction in the fan, unit not on a stable surface. | Unplug and check for obstructions. Place on a flat, stable surface. |
| Poor air purification. | Filter needs replacement, room size exceeds coverage. | Replace filter. Ensure unit is used in appropriate room size (up to 1570 ft²). |
| Smart features not connecting. | Wi-Fi connectivity issues, incorrect app setup, Matter controller not configured. | Ensure stable Wi-Fi. Re-pair via QR code. Check Matter controller setup. Consult AiDot app for troubleshooting. |
Specifications
- Model: P200 Pro
- Brand: WELOV
- Product Dimensions: 12"D x 11.8"W x 21"H
- Weight: 12.15 Pounds
- Coverage Area: Up to 1570 Square Feet (1 air change per hour)
- Filtration Efficiency: 99.997% of particles 0.1-0.3 µm (H13 True HEPA)
- Noise Level (Sleep Mode): 23dB
- Smart Connectivity: Matter 1.2, AiDot App, Apple Home, Google Home, Alexa, SmartThings
- Certifications: CARB Certified, EPA Certified, ETL Certified, Energy Star Certified, FCC Certified
Warranty and Support
WELOV offers a 12-month warranty with an additional 12-month extended warranty (total 24 months). For customer service, please contact:
- Email: support@welovhome.com (24-hour reply)
- Contact Hotline: +1 (866) 779 3866 (Mon. - Fri. 9:00-17:00 PST)
- Money-Back Guarantee: 30 Days
Figure 9: WELOV customer support details.
