Electrohome Montrose Wireless Vinyl Record Player User Manual

Introduction

Welcome to the world of analog music with your new Electrohome Montrose Wireless Vinyl Record Player. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your turntable to ensure optimal performance and enjoyment. The Montrose RR36 combines classic vinyl playback with modern features like Bluetooth connectivity and Vinyl-to-MP3 recording, offering a versatile listening experience.

Image: The Electrohome Montrose Wireless Vinyl Record Player, showcasing its teak wood plinth and clear dust cover.

Safety Information

Please read all safety and operating instructions carefully before using this product. Keep these instructions for future reference.

• Power Source: Use only the provided AC power adapter. Ensure the voltage matches the requirements of your region.
• Water and Moisture: Do not expose the unit to rain, moisture, dripping, or splashing. Do not place objects filled with liquids, such as vases, on the unit.
• Ventilation: Ensure proper ventilation. Do not block any ventilation openings.
• Heat: Do not place the unit near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Cleaning: Clean only with a dry cloth. Avoid using liquid cleaners or aerosol cleaners.
• Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
• Placement: Place the unit on a stable, level surface to prevent damage from falling.

What's Included

Carefully unpack all components and ensure you have received all items listed below:

Image: A visual representation of all items included in the Electrohome Montrose package.

• Electrohome Montrose Wireless Vinyl Record Player (RR36) with Dust Cover
• Audio-Technica AT3600L Cartridge (Pre-installed)
• Felt Turntable Mat
• Counterweight
• 45 RPM Adapter
• 5ft 100V - 240V (50/60Hz) AC Power Adapter
• 4ft RCA Cable with Ground Wire
• User Manual

Setup

1. Unpacking and Placement

Carefully remove the turntable from its packaging. Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust or vibrations. Ensure there is enough space around the unit for proper ventilation.

2. Platter and Belt Installation

1. Place the metal platter onto the center spindle.
2. Locate the drive belt underneath the platter. Carefully stretch the belt around the motor pulley.
3. Place the felt turntable mat on top of the platter.

3. Counterweight Adjustment

The counterweight balances the tonearm and applies the correct tracking force to the stylus. Proper adjustment is crucial for optimal sound and to prevent damage to your records.

1. Gently slide the counterweight onto the rear of the tonearm, with the numbers facing forward.
2. Remove the stylus protector from the cartridge.
3. Carefully release the tonearm from its rest. Adjust the counterweight by rotating it until the tonearm floats horizontally, perfectly balanced.
4. Once balanced, hold the counterweight steady and rotate the numbered ring to '0' (zero).
5. Rotate the entire counterweight (including the numbered ring) counter-clockwise to the recommended tracking force of 3.5 grams (align '3.5' with the indicator line).
6. Return the tonearm to its rest and secure it with the tonearm clamp.

Image: A close-up view of the Audio-Technica diamond-tipped stylus, essential for precise record groove tracking.

4. Dust Cover Installation

Insert the hinges of the dust cover into the slots at the back of the turntable. The dust cover protects the platter and stylus from dust when not in use.

5. Connecting to Power

Connect the provided AC power adapter to the 'DC IN' port on the back of the turntable, then plug it into a wall outlet.

6. Connecting to Audio

The Montrose RR36 offers both wired and wireless audio output options.

Wired Connection (RCA)

Use the included RCA cable to connect the turntable to an external amplifier or powered speakers. The turntable has a built-in preamplifier, which can be switched on or off.

• Connect the red RCA plug to the right audio input and the white RCA plug to the left audio input on your amplifier or powered speakers.
• Connect the ground wire from the turntable to the ground terminal on your amplifier (if available) to reduce hum.
• Set the 'PHONO/LINE' switch on the back of the turntable:
  • LINE: Use this setting if connecting to an amplifier or speakers that do NOT have a dedicated phono input (i.e., they have a built-in preamplifier).
  • PHONO: Use this setting if connecting to an amplifier or speakers that DO have a dedicated phono input (i.e., they have their own phono preamplifier).

Image: Rear view of the turntable highlighting the Phono/Line-Out Jacks and the Phono/Line-Out Switch for connecting to external audio systems.

Wireless Connection (Bluetooth)

The Montrose RR36 can stream audio wirelessly to Bluetooth-enabled speakers or headphones.

Image: A person enjoying music wirelessly, illustrating the Bluetooth streaming capability of the turntable.

Operating Instructions

1. Playing a Record

1. Place a record on the platter, ensuring it is centered.
2. Select the appropriate speed (33 or 45 RPM) using the speed selector switch. Use the 45 RPM adapter for records with larger center holes.
3. Release the tonearm clamp.
4. Lift the tonearm using the cueing lever.
5. Manually position the tonearm over the desired starting groove of the record.
6. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record and playback will begin.
7. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and secure it with the clamp.

2. Bluetooth Pairing

1. Ensure your Bluetooth speaker or headphones are in pairing mode.
2. Turn on the Montrose turntable. The Bluetooth indicator light will begin to flash, indicating it is searching for a device.
3. Once connected, the Bluetooth indicator light will turn solid.
4. You can now play records, and the audio will stream wirelessly to your paired device.

Image: Features of the turntable including wireless connectivity for Bluetooth speakers/headphones and USB port for Vinyl-to-MP3 recording.

3. Vinyl-to-MP3 Recording

The Montrose RR36 allows you to digitize your vinyl records directly to a USB flash drive.

1. Insert a USB flash drive into the USB port on the front of the turntable.
2. Start playing the record you wish to record.
3. Press the 'REC' button on the turntable. The recording indicator light will illuminate, indicating recording has started.
4. To stop recording, press the 'REC' button again. The recording indicator light will turn off.
5. Remove the USB flash drive. Your recorded MP3 files will be saved on the drive.

Maintenance

1. Stylus Care

• The stylus is delicate. Avoid touching it with your fingers.
• Clean the stylus regularly using a soft brush designed for stylus cleaning, brushing gently from back to front.
• Replace the stylus approximately every 300-500 hours of playback, or if you notice a degradation in sound quality.

2. Turntable and Dust Cover Cleaning

• Wipe the turntable plinth and dust cover with a soft, dry, lint-free cloth.
• For stubborn marks on the dust cover, use a slightly damp cloth, then dry thoroughly. Avoid abrasive cleaners.
• Keep the felt mat clean by gently shaking off dust or using a lint roller.

Troubleshooting

Specifications

Warranty and Support

Electrohome products are designed with superior quality and performance in mind. This product comes with a 1 Year Manufacturer's Warranty from the original date of purchase.

For technical support, warranty claims, or general inquiries, please contact Electrohome Customer Support. Details can typically be found on the Electrohome official website or through the retailer where the product was purchased.

Lifetime Customer Support is provided by Electrohome to assist you with any questions or issues you may encounter with your Montrose turntable.