1. Introduction
This manual provides essential information for the safe and effective use of your Insta360 X3 Battery. Please read this manual thoroughly before use and retain it for future reference.
Image 1.1: Main view of the Insta360 X3 Battery.
2. Safety Information
CAUTIONS IN USE:
- Do not expose the battery to fire or place into fire.
- Never reverse charge the battery.
- Do not disassemble, crush, puncture or deform the battery.
- Never allow the battery to get wet or be immersed in water.
Failure to follow these instructions may result in fire, electric shock, injury, or damage to the product or property.
Image 2.1: Side view of the Insta360 X3 Battery showing safety warnings and product identification.
3. Product Overview
The Insta360 X3 Battery is designed to provide extended power for your Insta360 X3 camera. It features a large 1800mAh capacity, ensuring maximum time for capturing content.
Image 3.1: Visual representation of the 1800mAh battery capacity.
The battery is equipped with a waterproof rubber ring to maintain the camera's waterproof performance when properly installed. It also comes with a protective case that includes a built-in memory card storage slot for convenience and peace of mind.
Image 3.2: The battery case featuring integrated memory card storage.
4. Setup & Charging
4.1 Inserting the Battery
To insert the battery into your Insta360 X3 camera, ensure the battery is oriented correctly and gently slide it into the battery compartment until it clicks securely into place. Always check the condition of the battery buckle and waterproof rubber ring before insertion. If damaged, it may affect the camera's waterproof performance.
4.2 Charging the Battery
The battery must be charged with the Fast Charge Hub officially sold by Insta360 or connected to a matching camera through the camera power adapter.
- When charging with the hub, ensure that the battery's charging point is aligned on the same side as the status indicators.
- It is suggested to connect the Fast Charge Hub to a 12V 3A power adapter. Using an adapter above 12V 3A may not increase charge speed or may produce unexpected results. When below 12V 3A, simultaneous charging may not work correctly and charging time may be prolonged.
The ambient temperature for battery charging should be between 0°C to 40°C (32°F to 104°F).
5. Operation
Once the battery is fully charged and securely inserted into your Insta360 X3 camera, you can power on your camera and begin recording. Refer to your Insta360 X3 camera's manual for specific operating instructions.
6. Maintenance & Storage
- Do not use or store batteries in a hot environment. Doing so may affect or shorten battery life.
- It is strictly forbidden to use batteries not officially sold by Insta360. If you need to replace the battery, please purchase it on the official website of Insta360 or through designated channels. Insta360 is not responsible for battery accidents and equipment failures caused by the use of unofficially provided batteries.
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your Insta360 X3 Battery, consider the following:
- Battery Not Charging: Ensure the charging cable and adapter are correctly connected and functioning. Verify that the battery is properly seated in the Fast Charge Hub.
- Short Battery Life: Check the ambient temperature during use; extreme temperatures can affect performance. Ensure you are using an official Insta360 battery.
- Battery Swelling: If the battery appears swollen or damaged, discontinue use immediately and dispose of it safely according to local regulations. Do not attempt to charge or use a swollen battery.
8. Specifications
| Feature | Specification |
|---|---|
| Product Dimensions | 2.57 x 2.52 x 1.02 inches |
| Item Weight | 1.28 ounces |
| Item Model Number | CINAQBT/A |
| Battery Type | Lithium Polymer |
| Battery Capacity | 1800 Milliamp Hours (mAh) |
| Standard Voltage | 3.85V |
| Charging Voltage | 4.40V |
| Nominal Power | 6.93Wh |
| Charging Time | Approximately 90 minutes |
| Battery Life | Approximately 81 minutes (usage dependent) |
| Use Environment Temperature | -20°C to 40°C (-4°F to 104°F) |
| Charging Environment Temperature | 0°C to 40°C (32°F to 104°F) |
| Recommended Uses | Insta360 X3 Camera |
9. Warranty & Support
For warranty information and technical support, please visit the official Insta360 website or contact their customer service directly. Ensure you retain your proof of purchase for warranty claims.
Official Insta360 Store: Insta360 Store on Amazon
