Introduction
Thank you for choosing EZVALO Puck Lights. These versatile, rechargeable LED puck lights are designed to provide convenient and efficient lighting for various spaces, such as under cabinets, closets, and shelves. Featuring wireless group control and dimmable functionality, they offer a modern and flexible lighting solution for your home.
Key Features
- USB Rechargeable Battery: Environmentally friendly and cost-effective, eliminating the need for frequent battery replacements.
- Wireless Group Control: Control multiple lights simultaneously with a single remote for synchronized operation.
- Dimmable Brightness: Adjust light intensity to suit your needs and create the desired ambiance.
- Touchless Control: Advanced sensing technology allows for easy on/off and dimming with simple hand gestures.
- Easy Installation: Magnetic snap-on design for quick and wire-free setup on various surfaces.
- Directional Lighting Effect: Focuses light precisely on objects, minimizing light spill.
Setup and Installation
The EZVALO Puck Lights are designed for easy, wire-free installation. They can be installed in two primary ways:
- Magnetic Surface Installation:
If your desired installation surface is magnetic, simply snap the puck light directly onto it. The built-in magnet will hold it securely in place.
Image: Illustration showing the EZVALO puck light being installed on both magnetic and non-magnetic surfaces. The top part shows installation on a non-magnetic surface using an adhesive metal plate, while the bottom part shows direct attachment to a magnetic surface.
- Non-Magnetic Surface Installation:
For non-magnetic surfaces, use the included adhesive metal plate. Peel off the protective film from one side of the adhesive, stick it firmly to your desired surface, then simply snap the puck light onto the metal plate.
Ensure the surface is clean and dry before applying the adhesive for optimal adhesion.
Operating Instructions
Power On/Off and Dimming
The EZVALO Puck Lights feature intuitive touchless control. To turn the light on or off, simply sweep your hand within 1.2 inches of the sensor. To dim the light, hover your hand over the sensor. The light will cycle through brightness levels; release your hand when the desired brightness is reached.
Image: Demonstrates sweeping hand motion for on/off and hovering for dimming, along with an illustration of multiple lights linked for group control.
Wireless Group Control (with Remote)
If you have multiple EZVALO Puck Lights and a compatible remote control (sold separately or included in certain packs), you can control them as a group. Follow the remote's instructions to pair it with your lights. This allows for simultaneous control of multiple lights from up to 32 feet away.
Image: Visual comparison highlighting EZVALO's USB rechargeable battery, touchless control, and group setting capabilities against traditional battery-operated, tap-controlled lights with non-group settings.
Charging and Battery Life
The EZVALO Puck Light is equipped with a USB rechargeable battery, designed for long-lasting performance and convenience. A full charge can provide up to 100 hours of run time, depending on brightness settings and usage.
Charging Instructions:
- Locate the USB charging port on the side of the puck light.
- Connect the provided USB charging cable to the light and to a standard USB power source (e.g., computer USB port, wall adapter, power bank).
- The indicator light will show red during charging and turn green when fully charged.
Image: Depicts the EZVALO puck light being charged via USB, with an indication of 100 hours run time and charging status lights (red for charging, green for fully charged).
For optimal battery longevity, avoid completely draining the battery frequently. The light maintains consistent brightness throughout its runtime, unlike traditional dry cell puck lights which may dim over time.
Image: A graph illustrating that EZVALO puck lights maintain consistent brightness over their runtime, contrasting with dry cell lights that show a significant drop in brightness after a few hours.
Maintenance
- Cleaning: Wipe the light gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing for an extended period, ensure the light is fully charged and store in a cool, dry place. Recharge every 3-6 months to maintain battery health.
- Water Exposure: These lights are not waterproof. Avoid exposure to water or high humidity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Battery is drained. Sensor is obstructed. Light is faulty. | Charge the light fully. Ensure nothing is blocking the sensor. Contact customer support. |
| Light does not dim. | Incorrect gesture. Sensor issue. | Ensure you are hovering your hand over the sensor. Try resetting the light by turning it off and on. |
| Remote control not working. | Remote battery low. Not paired correctly. Out of range. | Replace remote battery (if applicable). Refer to remote pairing instructions. Move closer to the lights. |
| Light flickers or dims unexpectedly. | Low battery. Interference. | Recharge the light. Move away from strong electromagnetic fields. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | EZVALO |
| Model | Rechargeable LED Puck Light |
| Color | White |
| Material | Glass |
| Style | Modern |
| Light Fixture Form | Puck |
| Power Source | USB Rechargeable Battery |
| Control Method | Touchless Sensor, Remote Control (for group) |
| Max Run Time | Up to 100 hours (depending on usage) |
Warranty and Support
EZVALO products come with a standard manufacturer's warranty. For specific warranty details, product support, or technical assistance, please refer to the warranty card included with your purchase or visit the official EZVALO website.
Contact Information:
- Website: Visit the EZVALO Store on Amazon
- Email: Refer to product packaging or official website for customer service email.
Please have your product model and purchase date ready when contacting support.