Aputure LS 600C PRO Instruction Manual

Product Overview

The Aputure LS 600C PRO is a powerful 600W output RGBWW full-color light designed for professional film and video production. It combines innovative features from Aputure's Nova and Light Storm series, offering intense output, versatile color control, and robust weather-resistant construction. This manual provides essential information for setting up, operating, and maintaining your LS 600C PRO.

Figure 1: The Aputure LS 600C PRO with its included Hyper Reflector.

Key Features

• Intense Output: 600W RGBWW full-color light engine, capable of 5,020+ lux at 3 meters with Hyper Reflector.
• Weather-Resistant Construction: Features weatherproof head cables and connectors for reliable outdoor use.
• Sidus Link Integration: Control the light wirelessly via Bluetooth using the Sidus Link mobile app.
• Flicker Reduction: Adjustable PWM dimming frequency (up to +2000Hz) to prevent flicker and banding at various shutter speeds.
• Versatile Color Control: Fully tunable CCT from 2,300K to 10,000K, green-magenta adjustment, HSI, X,Y, and gel presets.
• Built-in Lighting FX: 15 pre-programmed lighting effects for creative applications.
• Multiple Control Methods: Sidus Link, LumenRadio CRMX, Art-net & sACN via etherCON, 16-bit 5-Pin DMX512.
• Power Options: Multi-voltage V-mount battery plates (half power), 48V/15A DC input (3-pin XLR), AC power.

Setup

Unpacking and Inspection

Carefully remove all components from the packaging. Inspect the light fixture, control box, cables, and accessories for any signs of damage. Report any damage to your dealer immediately.

Assembly

1. Mount the LS 600C PRO lamp head onto a sturdy light stand using its dual junior/baby pin (16mm/28mm) receiver. Ensure the yoke's disk-brake is securely tightened.
2. Connect the weatherproof head cable from the lamp head to the control box. Ensure a secure connection.
3. Attach the control box to the light stand using the lightning clamp quick release plate, or place it on a stable surface.
4. Connect the 6m locking Neutrik powerCON TRUE1 TOP AC power cord to the control box and then to a suitable power outlet. Alternatively, attach V-mount batteries to the battery plates on the control box or connect a 48V/15A DC power source via the 3-pin XLR input.
5. Attach the Hyper Reflector or other Bowens Mount accessories to the front of the lamp head by aligning the accessory with the Bowens mount and twisting until it locks into place.

Figure 2: Proper setup of the LS 600C PRO with a light modifier.

Operating Instructions

Powering On and Basic Operation

Once connected to power, turn on the LS 600C PRO using the power switch on the control box. The display screen will illuminate, showing the current settings.

Figure 3: The intuitive control panel for adjusting light settings.

Adjusting Brightness and CCT

• Use the main control knob on the control box to adjust the brightness from 0.1% to 100%.
• Navigate to the CCT mode to adjust the color temperature from 2,300K (warm tungsten) to 10,000K (cool daylight).
• Fine-tune the green-magenta shift to match other light sources or achieve specific looks.

RGB, HSI, and Gel Presets

• Switch to RGB mode to select specific red, green, and blue values for precise color mixing.
• In HSI mode, control Hue, Saturation, and Intensity independently.
• Access over 300 built-in gel presets to quickly simulate various color filters.

Figure 4: Demonstrating the full-color capabilities of the LS 600C PRO.

Lighting Effects (FX)

The LS 600C PRO includes 15 built-in lighting effects such as Paparazzi, Lightning, Fireplace, and more. Select an effect from the menu and adjust its parameters (e.g., speed, intensity) as needed.

Flicker Reduction

To prevent banding or flicker when shooting at high frame rates or specific shutter speeds, adjust the PWM dimming frequency. Access this setting through the control system menu and set the frequency up to +2000Hz to optimize for your camera's settings.

Sidus Link App Control

Download the Sidus Link app on your smartphone or tablet. Enable Bluetooth on your device and pair it with the LS 600C PRO. The app provides comprehensive control over all light functions, including color, effects, and firmware updates.

Maintenance

• Keep the light clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Ensure all vents are clear of dust and debris to maintain proper airflow and prevent overheating.
• Regularly check cables and connectors for wear and tear. Replace damaged components immediately.
• Store the light in its protective case in a cool, dry place when not in use.

Figure 5: The weather-resistant design allows for use in various conditions, but proper maintenance is still crucial.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please visit the official Aputure website or contact their customer service. Keep your proof of purchase for warranty claims.

Official Aputure Website: www.aputure.com