1. Introduction
This manual provides instructions for the vhbw replacement glass turntable plate. This high-quality turntable plate is designed to ensure even heating of food in compatible microwave ovens, making cooking and reheating processes efficient. Please read this manual carefully before installation and use.
2. Compatibility
This vhbw turntable plate is compatible with the following microwave oven model:
- Silvercrest SMWC 700 C1
It also replaces original parts with the following numbers:
- YC-MS01E-B
- 11002491
- 3517203600
- 3517203610
Before installation, verify that your microwave oven model matches the listed compatibility.
3. Package Contents
The package contains:
- 1x vhbw Glass Turntable Plate
Note: The turntable plate is delivered without a rotating ring or motor element. These components are typically part of your microwave oven and are not included with this replacement plate.
4. Specifications
| Brand: | vhbw |
| Model Number: | VHBW4065705995996 |
| Diameter: | 25.5 cm (10 inches) |
| Material: | Glass |
| Glass Thickness: | Approx. 13 mm |
| Weight: | 641 g (approx. 1.41 lbs) |
| Coupling Type: | Y-coupling (3 feet) |
| Foot Distance from Edge: | 105 mm |
| Distance Between Feet (for driver): | 17 mm |
| Color: | Transparent |
5. Setup and Installation
Follow these steps to properly install the replacement turntable plate in your microwave oven:
- Ensure Safety: Before handling any microwave components, always unplug the microwave oven from the power outlet to prevent electrical hazards.
- Remove Old Plate (if applicable): If replacing an old or broken plate, carefully remove it from the microwave cavity.
- Inspect Microwave Components: Check the microwave oven's rotating ring and the central motor element (spindle) for any damage or debris. Clean these components if necessary.
- Position the Rotating Ring: Place the rotating ring (if removable) back into its designated groove on the microwave oven floor.
- Place the New Turntable Plate: Carefully place the vhbw glass turntable plate onto the rotating ring and the central motor element. Ensure that the Y-coupling on the underside of the plate aligns correctly with the spindle of the microwave oven's motor element. The plate should sit flat and securely.
Image 1: Underside of the turntable plate, highlighting the Y-coupling design. This coupling must align with the microwave's central spindle for proper rotation.
Image 2: Top view of the vhbw glass turntable plate, showing its transparent surface and textured edge.
Once installed, gently rotate the plate by hand to confirm it moves freely and is properly seated.
6. Operating Instructions
The vhbw glass turntable plate functions as a standard microwave plate. For optimal performance and safety:
- Always place food containers centrally on the turntable plate to ensure even heating and prevent imbalance.
- Do not operate the microwave oven without the turntable plate properly installed, as this can damage the appliance.
- Avoid placing excessively heavy items on the plate that exceed the microwave oven's weight capacity.
- Ensure the plate is clean and dry before use to prevent slipping or uneven rotation.
7. Maintenance and Cleaning
Regular cleaning of your turntable plate will help maintain hygiene and extend its lifespan:
- Daily Cleaning: After each use, wipe the plate with a damp cloth to remove food spills and splatters.
- Deep Cleaning: For stubborn stains or dried-on food, remove the turntable plate from the microwave oven. Wash it by hand using warm, soapy water and a soft sponge. Rinse thoroughly and dry completely before placing it back in the microwave.
- Dishwasher Safe: The glass turntable plate is generally dishwasher safe. Place it on the top rack for best results.
- Avoid Abrasives: Do not use abrasive cleaners, scouring pads, or sharp objects on the glass surface, as these can scratch or damage the plate.
- Handle with Care: Glass can break if dropped or subjected to sudden temperature changes. Allow the plate to cool before washing if it has just been used for cooking.
Image 3: Close-up view of the edge of the glass turntable plate, showing its smooth finish and thickness.
8. Troubleshooting
If you encounter issues with your turntable plate, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Plate does not rotate. |
|
|
| Plate makes grinding noise. |
|
|
| Food heats unevenly. |
|
|
9. Warranty and Support
Specific warranty information for this vhbw replacement part is typically provided at the point of purchase or on the manufacturer's official website. Please refer to your purchase documentation for details regarding warranty coverage and terms.
For technical support or further inquiries, please contact the retailer from whom you purchased this product or visit the vhbw official website for customer service contact information.
