Introduction
Thank you for choosing the Briloner Flexible Bedside Reading Lamp, Model 2079-016. This lamp is designed to provide adjustable illumination for reading and other activities, featuring a flexible arm and a convenient toggle switch. Please read this manual carefully before installation and use to ensure safe and optimal performance.
Image: The Briloner Flexible Bedside Reading Lamp in white, featuring a flexible gooseneck arm and a conical shade.
Safety Instructions
To prevent injury or damage, always follow these basic safety precautions:
- Ensure the power supply voltage matches the lamp's requirements (230 Volts).
- Do not attempt to modify or repair the lamp yourself. Contact qualified personnel for service.
- Always disconnect the lamp from the power outlet before cleaning or replacing the bulb.
- Avoid exposing the lamp to moisture or extreme temperatures. This product has an IP20 rating, meaning it is protected against solid objects over 12.5mm but not against water.
- Use only E27 bulbs with a maximum wattage of 10 Watts.
- Keep the lamp away from flammable materials.
Package Contents
Verify that all components are present before beginning installation:
- Briloner Flexible Bedside Reading Lamp (Model 2079-016)
- Mounting Hardware (screws, wall plugs)
- Integrated power cable with plug (180 cm)
Note: The light bulb is not included and must be purchased separately. An E27 bulb with a maximum of 10 Watts is required.
Installation Guide
This lamp is designed for wall mounting. Follow these steps for secure installation:
- Choose Location: Select a suitable wall location near a power outlet. Consider the lamp's dimensions (630mm H, base 40x40mm, head 140mm D) and the 50cm flexible arm for optimal positioning.
- Mark Drilling Points: Hold the lamp's mounting plate against the wall at the desired height and mark the positions for the mounting screws.
- Drill Holes: Drill holes at the marked points. Insert the appropriate wall plugs (if necessary, depending on wall material).
- Secure Lamp: Attach the lamp's mounting plate to the wall using the provided screws. Ensure it is firmly secured.
- Insert Bulb: Carefully screw an E27 bulb (max. 10W) into the lamp's socket.
- Connect Power: Plug the 180 cm power cable into a standard 230V AC wall outlet.
Image: Diagram illustrating the lamp's dimensions, showing a height of 570mm and a horizontal reach of 410mm from the base.
Image: The lamp installed on a wall, showing the integrated supply cable with a plug connected to a power outlet.
Operating Your Lamp
The Briloner Flexible Bedside Reading Lamp is designed for ease of use:
- Power On/Off: Use the toggle switch located on the square base of the lamp to turn the light on or off.
- Adjusting Light Direction: The 50 cm flexible tube allows you to bend and pivot the lamp head individually. This enables direct light for reading or indirect light for ambient illumination.
Image: Icons representing the lamp's features: a switch for power control, an E27 base for the bulb, and an adjustable symbol for the flexible arm.
Image: A visual representation showing three instances of the lamp, each with its flexible arm adjusted to a different position, highlighting its versatility.
Care and Maintenance
Proper care ensures the longevity and performance of your lamp:
- Cleaning: Before cleaning, always unplug the lamp. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled down before attempting to replace it. Unscrew the old E27 bulb and screw in a new E27 bulb (max. 10W).
Troubleshooting
If you encounter issues with your lamp, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | No power supply Faulty bulb Switch malfunction | Check if the plug is securely inserted into the outlet. Test the outlet with another device. Replace the bulb with a new E27 bulb (max. 10W). Ensure the toggle switch is in the 'ON' position. |
| Light flickers | Loose bulb Incompatible bulb Unstable power supply | Tighten the bulb in the socket. Ensure the bulb is E27 and within the 10W limit. Check the power outlet for stability. |
| Flexible arm does not hold position | Wear and tear | While some flexibility is normal, if the arm consistently fails to hold position, contact customer support. |
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Briloner |
| Model Number | 2079-016 |
| Dimensions (H x W x D) | 630mm (H), Base 40x40mm, Head 140mm (D) |
| Weight | 560 grams |
| Material | Metal, Plastic |
| Color | White Matt |
| Bulb Socket | E27 |
| Max. Wattage | 10 Watts |
| Voltage | 230 Volts |
| Switch Type | Toggle Switch |
| Cable Length | 180 cm |
| IP Rating | IP20 |
| Installation Type | Wall Mount |
Manufacturer Information
Briloner Leuchten GmbH is a German family-owned company with over 40 years of experience in manufacturing lighting solutions. They focus on product management, design, and sustainable practices.
For further assistance or inquiries, please refer to the retailer where the product was purchased.