FENNIO Vanity Mirror with Lights User Manual

Important Safety Guidelines

Please read and understand all instructions before using the FENNIO Vanity Mirror. Keep this manual for future reference.

• Keep out of reach of children to avoid accidents or injuries.
• Ensure the mirror is placed on a stable, flat surface to prevent tipping.
• Do not expose the mirror to excessive moisture or direct water contact.
• Unplug the mirror from the power outlet before cleaning or when not in use for extended periods.
• Do not attempt to disassemble or repair the mirror yourself. Contact qualified personnel for service.
• Avoid direct eye exposure to the LED lights for prolonged periods.

Product Overview

The FENNIO Vanity Mirror with Lights is designed to provide optimal lighting for makeup application and grooming. It features adjustable lighting modes and brightness, controlled by intuitive touch sensors.

Figure 1: FENNIO Vanity Mirror with Lights (White, 22"L x 17"W)

This image displays the FENNIO Vanity Mirror, showcasing its sleek design and illuminated frame, ready for use on a tabletop.

Key Features:

• 3 Color Modes & Brightness Adjustment: Includes cold light, daylight, and warm light settings. Brightness for each color is adjustable to simulate various lighting conditions.
• Large Makeup Mirror: Measures 17"H x 22"W, providing a comprehensive upper body view. Features 360° rotation for optimal positioning.
• Smart Touch Control: Intuitive touch buttons for power ON/OFF, light color changes, and brightness adjustments.
• Shatter-proof Membrane: Constructed with an aluminum alloy frame and a shatter-proof membrane to prevent glass fragments in case of accidental impact.
• High Definition Mirror Glass: Provides a clear and accurate reflection (CRI 90+).

Setup Instructions

1. Unpacking:

• Carefully open the packaging and remove all components.
• Verify that all parts are present: mirror unit, base, screws, and screwdriver.
• Inspect the mirror for any signs of damage during transit. If damaged, contact customer support immediately.

2. Assembly:

Assembly is straightforward and typically takes less than 5 minutes.

• Align the mirror unit with the slots on the base.
• Secure the mirror to the base using the provided screws and screwdriver. Ensure the screws are tightened firmly but do not overtighten.
• Place the assembled mirror on a stable, flat surface, such as a vanity desk or tabletop.
• Plug the power cord into a suitable electrical outlet.

Figure 2: Easy Installation Steps

This image illustrates the simple three-step assembly process: attaching the mirror to its base using the included hardware.

Operating Instructions

1. Power On/Off and Light Modes:

• Locate the touch sensor button on the mirror's surface.
• Short Press: Briefly touch the sensor to turn the mirror ON or OFF.
• Change Light Color: After turning on, short press the sensor repeatedly to cycle through the three color modes: Cold Light, Daylight, and Warm Light.

Figure 3: Three Color Lighting Modes

This image demonstrates the three distinct light color modes: Cool Light for daily makeup, Neutral Light for outdoor light simulation, and Warm Light for evening or party makeup.

2. Brightness Adjustment:

• While the mirror is on, Long Press: Touch and hold the sensor button. The brightness will gradually increase or decrease. Release your finger when the desired brightness level is reached.

Figure 4: Brightness Adjustment via Long Press

This image illustrates how to adjust the mirror's brightness by long-pressing the touch button, showing levels from 10% (low) to 100% (high).

3. Magnifying Mirror (Optional Accessory):

Some models may include a small, detachable magnifying mirror. This accessory can be attached to the main mirror surface for detailed tasks like tweezing or precise makeup application. Its position can be adjusted as needed.

Care and Maintenance

• Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid liquid seeping into the frame or electrical components.
• Cleaning the Frame: Wipe the aluminum frame with a soft, dry cloth. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Storage: If storing the mirror for an extended period, unplug it and store it in a dry, cool place, preferably in its original packaging to protect it from dust and damage.
• Avoid Impact: While the mirror features a shatter-proof membrane, avoid dropping or subjecting it to strong impacts to maintain its integrity and functionality.

Troubleshooting

Product Specifications

Warranty and Customer Support

FENNIO is committed to providing high-quality products and excellent customer service. For any questions, concerns, or warranty claims regarding your vanity mirror, please refer to the contact information provided with your purchase or visit the official FENNIO website.

Please retain your proof of purchase for warranty purposes.