RUBOT Mini Car Vacuum Cleaner P12 Instruction Manual

Introduction

Thank you for choosing the RUBOT Mini Car Vacuum Cleaner P12. This compact and powerful handheld vacuum is designed for efficient cleaning in various environments, including your car, home, and office. Please read this manual thoroughly before operating the device to ensure safe and optimal performance. Keep this manual for future reference.

Image: The RUBOT Mini Car Vacuum Cleaner P12, showcasing its sleek, compact design in red.

Package Contents

Ensure all items are present upon unboxing:

• RUBOT Mini Car Vacuum Cleaner P12 (Main Unit)
• 2-in-1 Crevice Tool (with retractable brush)
• Blowing Hose
• USB Type-C Charging Cable
• HEPA Filter (pre-installed)
• Spare HEPA Filter
• Cleaning Brush for Filter
• Storage Bag
• User Manual (this document)

Image: All components included with the RUBOT Mini Car Vacuum Cleaner P12, laid out on a surface.

Setup

1. Initial Charging

Before first use, fully charge the vacuum cleaner. The device features a built-in Lithium-Ion battery.

1. Connect the USB Type-C charging cable to the charging port located at the rear of the vacuum.
2. Connect the other end of the USB cable to a compatible USB power source (e.g., car charger, power adapter, computer USB port).
3. The indicator lights will show charging status. A full charge typically takes approximately 4 hours.
4. Once fully charged, disconnect the charging cable.

Image: The RUBOT Mini Car Vacuum Cleaner P12 connected to a USB-C charger, illustrating the charging process.

2. Attaching Accessories

The vacuum comes with versatile attachments for different cleaning needs:

• 2-in-1 Crevice Tool: This tool can be used as a narrow nozzle for tight spaces or with its retractable brush for upholstery and carpets. Simply slide the brush head forward or backward to switch modes. Attach it to the suction inlet at the front of the vacuum.
• Blowing Hose: For blowing dust out of hard-to-reach areas, attach the blowing hose to the exhaust port at the rear of the vacuum.

Image: The RUBOT Mini Car Vacuum Cleaner P12 demonstrating the attachment of the 2-in-1 crevice tool and the blowing hose for different functions.

Operating Instructions

1. Power On/Off and Speed Adjustment

The vacuum features a push-button control for power and two suction speeds:

1. Press the power button once to turn on the vacuum at the standard suction speed (8K PA).
2. Press the power button a second time to switch to the high suction speed (16K PA) for more powerful cleaning.
3. Press the power button a third time to turn off the vacuum.

Image: The RUBOT Mini Car Vacuum Cleaner P12 illustrating its two-speed adjustment feature for different cleaning intensities.

2. Vacuuming

Use the appropriate attachment for the surface you are cleaning:

• For general debris on flat surfaces, use the narrow nozzle.
• For pet hair, crumbs, or dust on upholstery, carpets, or keyboards, extend the brush on the 2-in-1 crevice tool.
• Move the vacuum slowly over the area to ensure thorough cleaning.

Image: The RUBOT Mini Car Vacuum Cleaner P12 being used to clean crumbs and debris from a car's center console.

3. Blowing Function

To use the blowing function:

1. Attach the blowing hose to the exhaust port at the rear of the vacuum.
2. Turn on the vacuum. Air will be expelled from the hose, allowing you to dislodge dust and debris from crevices, keyboard keys, or other hard-to-reach spots.

Maintenance

1. Emptying the Dust Container

For optimal suction, empty the dust container regularly, especially after each use or when it appears full.

1. Twist the dust container counter-clockwise to detach it from the main unit.
2. Carefully remove the HEPA filter from the dust container.
3. Empty the collected debris into a trash bin.

2. Cleaning the HEPA Filter

The HEPA filter is washable and reusable. Regular cleaning ensures efficient filtration and suction power.

1. After emptying the dust container, gently tap the HEPA filter to dislodge any remaining dust. Use the provided cleaning brush for thorough cleaning.
2. Rinse the HEPA filter under running water until clean. Do not use hot water or detergents.
3. Allow the filter to air dry completely before reinserting it into the dust container. Ensure it is completely dry to prevent mold or damage to the vacuum.
4. Reassemble the filter and dust container, then attach them back to the main unit by twisting clockwise until secure.

Important: Do not immerse the main vacuum unit in water.

Image: A visual guide demonstrating the steps to remove, clean, and reassemble the washable HEPA filter.

Troubleshooting

If the problem persists after trying these solutions, please contact RUBOT customer support.

Specifications

Warranty and Support

RUBOT products come with a comprehensive warranty and dedicated customer support:

• 24-Month Warranty: Your RUBOT Mini Car Vacuum Cleaner P12 is covered by a 24-month warranty from the date of purchase.
• 12 Months Replacement: In case of manufacturing defects, a replacement will be provided within 12 months.
• 30-Day Return Policy: Enjoy a 30-day return policy for your peace of mind.
• Lifelong Free HEPA Filter: Benefit from lifelong free HEPA filter replacements.
• 24/7 Email Assistant: For any questions or issues, please contact the RUBOT Customer Team. We aim to reply within 12 hours.

For support, please refer to the contact information provided on the product packaging or the official RUBOT website.

Image: Graphic detailing RUBOT's customer care, including warranty, replacement, and support contact.