1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the Uniview ENS IPC94144SFW-X25-F40C 4MP+4MP Lighthunter Dual-Lens Network PTZ Camera. This advanced surveillance camera integrates a fixed lens and a Pan-Tilt-Zoom (PTZ) lens, offering comprehensive monitoring capabilities with a single IP address. It features 25X optical zoom, Lighthunter technology for superior low-light performance, and both IR and warm light illumination.
2. Safety Information
Please read and understand all safety instructions before installing and operating the camera. Failure to follow these instructions may result in injury, damage to the product, or property damage.
- Power Supply: Use only the specified power adapter (DC12V) or a compliant Power over Ethernet (PoE+) source. Ensure the power source is stable and meets the camera's requirements.
- Installation Environment: Install the camera in a stable location that can support its weight. Avoid installing in areas with extreme temperatures, high humidity, or strong vibrations.
- Water and Moisture: This camera is designed for outdoor use, but ensure all connections are properly sealed to prevent water ingress. Do not immerse the camera in water.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth. Do not use strong detergents or abrasive cleaners.
- Servicing: Do not attempt to disassemble or repair the camera yourself. Refer all servicing to qualified personnel.
- Cable Management: Ensure all cables are routed safely and securely to prevent tripping hazards or damage.
3. Package Contents
Verify that all items are present and in good condition upon opening the package. If any items are missing or damaged, contact your vendor immediately.
- Uniview ENS IPC94144SFW-X25-F40C Dual-Lens Network PTZ Camera
- Mounting Bracket and Screws
- Waterproof Connector Kit
- Power Adapter (Optional, depending on package)
- Quick Start Guide
- Drilling Template
4. Product Overview
The ENS IPC94144SFW-X25-F40C camera combines a fixed wide-angle lens and a powerful PTZ lens to provide both a general overview and detailed close-ups simultaneously. Key features include:
- Dual-Lens System: Fixed camera and PTZ camera integration for comprehensive coverage.
- High Resolution: 4MP for both fixed and PTZ channels.
- Optical Zoom: 25X optical zoom on the PTZ channel for detailed viewing.
- Lighthunter Technology: Enhanced image quality in low-light conditions.
- Illumination: Up to 100m (328.1 ft) IR range and up to 30m (98.4 ft) warm light range for versatile night vision.
- Smart Intrusion Prevention: PTZ channel can track objects detected by the fixed channel's smart intrusion rules.
- Audio & Alarm I/O: 2 alarm inputs, 1 alarm output, 1 audio input, and 1 audio output for integration with external devices.
- Compression: Supports Ultra 265, H.265, H.264, and MJPEG video compression.
Figure 1: Uniview ENS IPC94144SFW-X25-F40C Dual-Lens Network PTZ Camera. This image shows the overall design of the camera, highlighting its dual-lens configuration and dome form factor.
5. Installation and Setup
5.1 Mounting the Camera
Before mounting, select a suitable location that provides the desired viewing angle and is within reach of power and network connections. Use the provided drilling template to mark and drill holes for the mounting bracket. Secure the bracket firmly to the mounting surface using appropriate screws and anchors.
5.2 Power Connection
The camera can be powered by either a DC12V power adapter or Power over Ethernet Plus (PoE+ IEEE 802.3at).
- DC12V: Connect a compatible 12V DC power adapter to the camera's power input port.
- PoE+: Connect an Ethernet cable from a PoE+ enabled switch or injector to the camera's RJ45 network port. This will provide both power and data connectivity.
Warning: Ensure the power source matches the camera's requirements to prevent damage.
5.3 Network Connection
Connect an Ethernet cable from your network switch or router to the camera's RJ45 network port. Ensure the network connection is stable for optimal performance. The camera supports 10M/100M Base-TX Ethernet.
5.4 Initial Configuration
After connecting power and network, the camera will boot up. You can access the camera's web interface via a web browser using its default IP address (refer to the Quick Start Guide for default IP and login credentials). Alternatively, use Uniview's client software for device discovery and initial setup. During the first login, you will be prompted to set a strong password for security.
6. Operation
6.1 Live View and Recording
Access the live view through the web interface or client software. You can configure recording schedules, motion detection recording, and continuous recording settings. Recorded footage can be stored on a Network Video Recorder (NVR) or local storage (if supported by the camera model, check specifications for SD card slot).
6.2 PTZ Control and Zoom
The PTZ channel allows for remote control of pan, tilt, and zoom functions. Use the on-screen controls in the web interface or client software to adjust the camera's view. The 25X optical zoom enables clear observation of distant objects. You can also set preset positions and patrol routes for automated monitoring.
6.3 Smart Intrusion Prevention
Configure smart intrusion prevention rules for the fixed camera channel. When an object triggers a defined rule (e.g., line crossing, intrusion detection), the PTZ camera can automatically track the object, providing detailed surveillance of the event.
6.4 Illumination Modes
The camera automatically switches between day and night modes using its IR-cut filter. In low-light conditions, it can utilize its IR illuminators (up to 100m) or warm light illuminators (up to 30m) to provide clear images. The warm light feature enables full-color imaging even in darkness.
7. Maintenance
7.1 Cleaning
Regularly clean the camera lens and housing to ensure optimal image quality. Use a soft, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals or abrasive materials.
7.2 Firmware Updates
Periodically check the Uniview official website for firmware updates. Keeping your camera's firmware up-to-date ensures optimal performance, security enhancements, and access to new features. Follow the instructions provided with the firmware update package carefully.
7.3 Environmental Checks
Inspect the camera's mounting and cable connections periodically to ensure they remain secure and free from damage, especially after severe weather conditions.
8. Troubleshooting
This section addresses common issues you might encounter. For more complex problems, contact technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Camera not turning on | Incorrect power connection; Faulty power adapter/PoE switch; Power outage. | Check power cable connection. Verify power adapter/PoE switch functionality. Ensure power outlet is active. |
| No network connection/Cannot access camera | Loose Ethernet cable; Incorrect IP address; Network configuration issue; Firewall blocking access. | Check Ethernet cable connection. Verify camera's IP address and network settings. Disable firewall temporarily for testing. Ensure camera and viewing device are on the same network segment. |
| Poor image quality | Dirty lens; Insufficient lighting; Incorrect focus; Network bandwidth issues. | Clean the lens. Ensure adequate lighting or verify IR/warm light is active. Adjust focus if manual focus is an option. Check network bandwidth and camera's video settings (resolution, bitrate). |
| PTZ control not responding | Network latency; Software issue; PTZ motor malfunction. | Check network connection stability. Restart the camera. Update firmware. If problem persists, contact support. |
9. Specifications
The following table details the technical specifications of the Uniview ENS IPC94144SFW-X25-F40C camera.
| Feature | Description |
|---|---|
| Model Number | IPC94144SFW-X25-F40C |
| Sensor | Fixed: 1/1.8", 4MP, CMOS; PTZ: 1/2.7", 4MP, CMOS |
| Day/Night | IR-cut filter with auto switch (ICR) |
| Shutter Speed | Auto/Manual, 1 ~ 1/100000s |
| WDR | 120dB |
| S/N Ratio | 56dB |
| Lens Type | Fixed: 4mm@F1.0; PTZ: 4.8~120mm@F1.5, AF automatic focusing and motorized zoom lens |
| Iris | Fixed: F1.0; PTZ: Auto; F1.5(W)~F3.8(T) |
| Optical Zoom | 25x |
| Focus Type | Auto Focus |
| IR Range | Up to 100m (328.1 ft) |
| Warm Light Range | Up to 30m (98.4 ft) |
| Wavelength | 850nm (IR) |
| Digital Noise Reduction | 2D/3D DNR |
| Smart IR | Support |
| Video Compression | Ultra 265, H.265, H.264, MJPEG |
| Basic Detection | Motion detection, Audio detection, Tampering Alarm |
| Pan Speed | 0.1°/s ~ 80°/s; Preset speed: 80°/s |
| Tilt Range | Fixed: 18° ± 5°; PTZ: -15° ~ 90° |
| Tilt Speed | 0.1°/s ~ 80°/s; Preset speed: 80°/s |
| Serial Port | 1 RS485 |
| Built-in Speaker | Yes |
| Network Interface | 1x RJ45 10M/100M Base-TX Ethernet |
| Power Input | DC12V (±25%), PoE+(IEEE 802.3at) |
| Power Consumption | MAX 24W |
| Working Environment | -40℃ ~ +65℃ (-40°F ~ +149°F) |
| Storage Environment | -40℃ ~ +70℃ (-40°F ~ +158°F) |
| Humidity | ≤95% RH (non-condensing) |
| Dimensions | Φ6.4" x 12.0" (Φ162.5mm x 304.8mm) |
| Weight | 5.00lb (2.27kg) |
| Form Factor | Dome |
| Color | White |
| Alarm I/O | 2 in / 1 out |
| Audio I/O | 1 in / 1 out |
10. Warranty and Support
Uniview products are backed by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and product. Please refer to the warranty card included with your product or visit the official Uniview website for detailed warranty information.
For technical support, troubleshooting assistance, or to report issues, please contact your authorized Uniview dealer or visit the Uniview support portal. Ensure you have your product model number and serial number ready when contacting support.
Official Website: www.uniview.com
