ELECOM V Custom VM600PE Wireless Gaming Mouse User Manual

1. Product Overview and Features

The ELECOM V Custom VM600PE is a high-performance wireless gaming mouse designed for precision and speed. It features an ultra-lightweight design, a highly accurate optical sensor, and customizable buttons to enhance your gaming experience.

Figure 1.1: Top view of the ELECOM V Custom VM600PE Wireless Gaming Mouse.

Key Features:

• Fast & Accurate Sensor: Equipped with a 26,000 DPI optical sensor (Pixart PAW3395) and ELECOM's proprietary S.P.S. ENGINE, offering up to 650 IPS max speed and 50G acceleration.
• Ultralight Weight: Weighs only 75g, facilitating rapid and precise movements during gameplay.
• Adjustable Lift-Off Distance: The D-Sensor allows lift-off distance adjustment from 0mm to 1.5mm, ensuring continuous movement sensing even when the mouse is lifted.
• Rechargeable Battery: Built-in lithium-ion battery provides up to 95 hours of use on a single charge, rechargeable via the included USB-A to USB-C cable.
• 8 Programmable Buttons: Customize button functions, RGB lighting, and other settings using the dedicated EG Tool software.

Figure 1.2: Overview of VM600PE key specifications.

Figure 1.3: Internal view highlighting the PAW3395DM sensor and S.P.S Engine D+ for enhanced speed, precision, and stability.

2. Setup Guide

2.1 Package Contents

Before you begin, ensure all items are present in the package:

• ELECOM V Custom VM600PE Wireless Gaming Mouse
• USB-A to USB-C Charging Cable (braided nylon)
• Wireless USB Receiver
• Grip Tape Set
• User Manual (this document)

2.2 Initial Charging

It is recommended to fully charge the mouse before first use.

1. Connect the USB-C end of the charging cable to the mouse's charging port.
2. Connect the USB-A end of the charging cable to a powered USB port on your computer or a USB wall adapter.
3. The mouse's LED indicator will show charging status (refer to the LED indicator section in Operating Instructions for details). A full charge takes approximately [X hours - not specified in data, so omit specific time].

2.3 Connecting the Mouse

The VM600PE connects wirelessly via its dedicated USB receiver.

1. Insert the wireless USB receiver into an available USB-A port on your computer.
2. Turn on the mouse using the power switch located on the bottom of the mouse.
3. The mouse should automatically connect to the receiver. If not, press the pairing button (if available, refer to mouse bottom diagram) or restart the mouse and ensure the receiver is properly inserted.

Figure 2.1: Charging setup and bottom view of the mouse.

2.4 Software Installation (EG Tool)

To unlock the full customization potential of your VM600PE mouse, install the EG Tool software.

1. Visit the official ELECOM website (refer to product packaging or ELECOM's main site for the exact download link).
2. Navigate to the support or downloads section and locate the EG Tool software for the VM600PE mouse.
3. Download and run the installer, following the on-screen prompts.
4. Once installed, launch the EG Tool to configure your mouse settings.

Figure 2.2: EG Tool software interface for customization.

3. Operating Instructions

3.1 Button Functions

The VM600PE features 8 programmable buttons. Their default functions are:

Figure 3.1: Location of the 8 programmable buttons.

Use the EG Tool software to reassign these buttons to macros, keyboard shortcuts, or other functions.

3.2 DPI Adjustment

The mouse supports a wide range of DPI settings up to 26,000 DPI. You can cycle through preset DPI levels using buttons 6 and 7, or fine-tune them using the EG Tool software.

Figure 3.2: High-resolution 26K DPI optical sensor.

3.3 Lift-Off Distance (LOD) Setting

The D-Sensor allows you to adjust the lift-off distance, which is the height at which the mouse stops tracking when lifted from the surface. This is particularly useful for competitive gaming.

Figure 3.3: Adjustable Lift-off Distance (LOD) via D-Sensor.

Adjust the LOD using the EG Tool software to your preferred setting (0mm to 1.5mm).

3.4 RGB LED Customization

The mouse features customizable RGB LED lighting. Use the EG Tool software to select colors, lighting effects, and brightness levels to match your setup or mood.

3.5 Battery Status Indicator

The mouse's LED indicator provides information on battery status:

• Solid Green: Fully charged.
• Pulsing Green: Charging.
• Solid Red: Low battery.

4. Maintenance

4.1 Cleaning the Mouse

Regular cleaning helps maintain the mouse's performance and longevity.

• Turn off the mouse before cleaning.
• Use a soft, dry, lint-free cloth to wipe the surface of the mouse.
• For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid excessive moisture.
• Use a cotton swab or compressed air to clean around the scroll wheel and sensor area.
• Do not use harsh chemicals, abrasive cleaners, or immerse the mouse in liquid.

4.2 Battery Care

To maximize battery life:

• Avoid fully discharging the battery frequently.
• Store the mouse in a cool, dry place when not in use for extended periods.
• If storing for a long time, charge the battery to about 50% before storage.

4.3 Grip Tape Application

The included grip tape can be applied for enhanced grip and comfort.

1. Ensure the mouse surface is clean and dry.
2. Carefully peel off the backing from the grip tape pieces.
3. Align the tape with the corresponding areas on the mouse (e.g., sides, main buttons).
4. Press firmly to ensure good adhesion, smoothing out any air bubbles.

5. Troubleshooting

5.1 Mouse Not Responding

• Check Power: Ensure the mouse is turned on and has sufficient battery charge. Recharge if necessary.
• Check Receiver: Ensure the USB receiver is securely plugged into a working USB port on your computer. Try a different USB port.
• Re-pair: If connection is lost, try re-pairing the mouse with the receiver (refer to the Setup Guide or EG Tool for pairing instructions).
• Interference: Move the mouse closer to the receiver or away from other wireless devices that might cause interference.

5.2 Inaccurate Tracking or Cursor Lag

• Clean Sensor: Dust or debris on the optical sensor can cause tracking issues. Clean the sensor area carefully (refer to Maintenance section).
• Mouse Pad/Surface: Ensure you are using the mouse on a clean, uniform, non-reflective surface or a high-quality mouse pad.
• DPI Setting: Adjust the DPI setting to a level suitable for your usage.
• Lift-Off Distance: If the cursor moves when you lift the mouse, adjust the LOD setting in the EG Tool.

5.3 Buttons Not Working or Programmable

• EG Tool: Ensure the EG Tool software is installed and running. Check button assignments within the software.
• Software Conflict: Close any other mouse-related software that might be conflicting with the EG Tool.
• Firmware Update: Check the ELECOM website for any available firmware updates for your mouse, which can resolve software-related issues.

6. Specifications

7. Warranty and Support

7.1 Warranty Information

ELECOM products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ELECOM website. Keep your proof of purchase for warranty claims.

7.2 Customer Support

If you encounter any issues not covered in this manual or require further assistance, please contact ELECOM customer support. Contact information can typically be found on the official ELECOM website or on your product packaging.

Online Resources:

• Official ELECOM Website: https://www.elecom.net/global/
• Product Support Page (if available): Check the ELECOM website for a dedicated support page for the VM600PE mouse.