Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Novastar VX16S All-in-1 Controller/Video Processor. The VX16S is designed for advanced video processing and display control, capable of loading up to 10,400,000 pixels across its 16 Ethernet output ports.
Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage.
Product Overview
The Novastar VX16S is a powerful all-in-one controller and video processor, integrating video processing, video control, and LED screen configuration into a single unit. It features multiple input interfaces and extensive output capabilities.
Key Features:
- High Pixel Capacity: 16 Ethernet output ports supporting up to 10,400,000 pixels.
- Versatile Inputs: Includes 2x 3G-SDI, 1x HDMI 2.0, and 4x SL-DVI for various video sources.
- Integrated Control: Combines video processing and control functions for streamlined operation.
Front Panel Layout:
Figure 1: Front panel of the Novastar VX16S. This view highlights the input selection buttons (HDMI, DVI, SDI), the main display screen, and control buttons for menu navigation, PIP, scaling, and function keys.
Rear Panel Layout:
Figure 2: Rear panel of the Novastar VX16S. This view displays the various input ports (DVI, HDMI 2.0, 3G-SDI), Ethernet output ports (1-16), control ports (Ethernet, RS232, USB), and the power input.
Setup and Installation
Unpacking and Inspection:
- Carefully unpack the VX16S unit from its packaging.
- Inspect the device for any signs of physical damage during transit. If damage is found, contact your supplier immediately.
- Verify that all accessories listed in the packing list are present.
Rack Mounting:
The VX16S is designed for standard 19-inch rack mounting. Ensure adequate ventilation space around the unit when installing it in a rack.
Connecting Power:
- Connect the provided power cable to the AC power input on the rear panel of the VX16S.
- Plug the other end of the power cable into a grounded electrical outlet.
- Ensure the power switch on the front panel is in the OFF position before connecting power.
Input Connections:
Connect your video sources to the appropriate input ports on the rear panel:
- HDMI 2.0: For high-resolution digital video and audio signals.
- SL-DVI: For DVI video sources.
- 3G-SDI: For professional broadcast video signals.
Output Connections:
- Ethernet Output Ports (1-16): Connect these ports to your LED display receiving cards using standard Ethernet cables. Ensure proper cable length and quality for stable signal transmission.
- Monitor Output: Connect a monitor to the HDMI monitor output port to view the output signal or the device's OSD (On-Screen Display).
Operating Instructions
Powering On/Off:
- To power on, flip the power switch on the front panel to the ON position.
- To power off, flip the power switch to the OFF position.
Basic Operation:
- Input Selection: Use the input buttons on the front panel (HDMI, DVI, SDI) to select the desired video source.
- Menu Navigation: Use the rotary knob and ESC button to navigate through the OSD menu on the front display.
- Screen Configuration: Access the screen configuration settings via the OSD menu to set up your LED display resolution, mapping, and other parameters. Refer to the NovaStar software manual for detailed screen configuration.
- PIP/PBP: Use the PIP/PBP buttons to enable Picture-in-Picture or Picture-by-Picture modes, allowing multiple video sources to be displayed simultaneously.
- Scaling: The SCALE button allows for adjusting the output resolution to match the display.
Advanced Settings (via Software):
For advanced configuration, pixel mapping, and fine-tuning, connect the VX16S to a computer via the Ethernet control port and use the NovaLCT software. Detailed instructions for NovaLCT are available in the software's dedicated user guide.
Maintenance
- Cleaning: Regularly clean the exterior of the unit with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Ventilation: Ensure that the ventilation openings are clear of dust and obstructions to prevent overheating.
- Firmware Updates: Periodically check the NovaStar official website for firmware updates. Follow the provided instructions carefully when performing updates to avoid damaging the device.
- Cable Management: Ensure all cables are securely connected and properly routed to prevent accidental disconnections or damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected; Power switch off; Power outlet fault. | Check power cable connection; Ensure power switch is ON; Test power outlet with another device. |
| No video output | Incorrect input selected; Output cables loose/damaged; LED screen not configured correctly. | Select correct input source; Check all output cable connections; Verify LED screen configuration in NovaLCT. |
| Image flickering or unstable | Poor quality cables; Signal interference; Incorrect refresh rate. | Use high-quality shielded cables; Check for nearby interference sources; Adjust refresh rate in settings. |
| Device unresponsive | Temporary software glitch. | Power cycle the device (turn off, wait 10 seconds, turn on). |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | VX16S |
| Manufacturer | NovaStar |
| Pixel Capacity | 10,400,000 pixels (max) |
| Ethernet Output Ports | 16 |
| Video Inputs | 2x 3G-SDI, 1x HDMI 2.0, 4x SL-DVI |
| Product Dimensions (L x W x H) | 17 x 21 x 9 inches |
| Item Weight | 20.6 pounds |
| Color | Black |
| Compatible Devices | Projector, Monitor, Gaming Console, Television |
| Country of Origin | China |
Warranty and Support
Warranty Information:
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official NovaStar website. Keep your purchase receipt as proof of purchase for warranty claims.
Technical Support:
If you encounter any issues not covered in this manual or require further assistance, please contact NovaStar technical support through their official website or the contact information provided with your product. When contacting support, please have your product model number (VX16S) and serial number ready.
NovaStar Official Website: www.novastar.tech