Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Pomya G10S PRO BT Air Mouse Smart Voice Remote Control. This device offers dual connectivity modes (2.4G wireless and Bluetooth 5.0) and features an air mouse function, voice control, and IR learning capabilities for enhanced control of your compatible devices.
Image: The Pomya G10S PRO BT remote control, showcasing its dual 2.4G wireless and Bluetooth 5.0 connectivity for various devices.
Setup
1. Battery Installation
The remote control requires two AAA batteries (not included). To install:
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover.
Note: The 2.4G USB receiver is located inside the battery compartment. Remove it before closing the cover if you intend to use 2.4G mode.
2. Connecting via 2.4G Wireless Mode (Plug and Play)
The 2.4G wireless mode offers a stable and sensitive connection for most devices.
- Locate the USB receiver inside the remote's battery compartment.
- Plug the USB receiver into an available USB port on your device (e.g., TV box, computer, projector).
- The remote control should automatically connect and be ready for use.
Image: The USB receiver is inserted into a device, enabling 2.4G wireless control. This mode provides a wireless range of over 10 meters.
3. Connecting via Bluetooth 5.0 Mode
Bluetooth mode is primarily supported by Android systems. Ensure the USB receiver is disconnected when using Bluetooth mode.
- Ensure the 2.4G USB receiver is disconnected from your device.
- Press and hold the OK button and the Return button simultaneously for 3 to 5 seconds.
- The remote control will enter pairing mode.
- On your Android device, navigate to Bluetooth settings and select the remote control to pair.
Compatibility Note: Due to variations in Bluetooth modules across devices, Bluetooth mode may not be compatible with all systems. Operation may vary based on your specific device.
Operation
1. Button Functions Overview
Image: A detailed diagram illustrating the function of each button on the Pomya G10S PRO BT remote control.
- Power: Turns the device on/off.
- IR Learning Key: Used for infrared programming.
- Play/Pause: Controls media playback.
- Mouse On/Off: Activates/deactivates the air mouse function.
- Directional Pad (Up, Down, Left, Right): Navigation.
- OK/Enter: Confirms selections.
- Home: Returns to the home screen.
- Return: Goes back to the previous screen.
- Menu: Accesses menu options.
- Backlit On/Off: Toggles button backlight.
- Page Up/Down: Scrolls through pages.
- Volume +/ -: Adjusts volume.
- Voice Switch: Activates voice control.
- Mute: Mutes audio.
- BackSpace (DEL): Deletes characters.
2. Air Mouse Function
The remote control features a 6-axis gyroscope sensor for motion sensing, allowing you to control a cursor on your screen by moving the remote in the air.
- Press the Mouse On/Off button to activate the air mouse.
- Move the remote in the air to control the cursor.
- Press the OK/Enter button to click.
- Press the Mouse On/Off button again to deactivate the air mouse and use directional buttons.
Image: A user demonstrating the motion-sensing air mouse feature, controlling the screen cursor by moving the remote freely.
Image: Illustration emphasizing the built-in 6-axis gyroscope sensor, which provides stable and easy control for the air mouse function.
3. Voice Function
The remote supports voice assistant functionality, primarily for Google Assistant.
- Press the Voice Switch button to activate the voice input.
- Speak your command clearly into the remote's microphone.
Compatibility Notes:
- In Bluetooth mode, the voice function is only supported on ATV system devices.
- In 2.4G mode, it supports most Android devices that are compatible with Google Voice.
Image: A user interacting with the voice function of the remote, demonstrating its ability to open applications like YouTube on a connected display.
4. Backlight Control
The remote features a backlight for improved visibility in low-light conditions.
- Press and hold the Backlit On/Off button (light bulb icon) for 3 seconds to turn the backlight on or off.
Image: A visual guide demonstrating how to activate or deactivate the remote's backlight by pressing and holding the designated button.
5. IR Learning for Power Button
The Power button on the G10S PRO BT can learn infrared (IR) codes from another remote control, allowing it to control your device's power function.
- Press and hold the Power button on the G10S PRO BT for 3 seconds. The red indicator light will flash slowly, indicating it has entered IR learning state.
- Point the infrared emitter of your original remote control towards the infrared receiver of the G10S PRO BT (typically at the top) at a distance of 2-3 cm.
- Press the Power button on your original remote control.
- Once the G10S PRO BT receives the infrared code, the red indicator light will go out after flashing, indicating that the infrared programming is complete.
Note: The "Mute" button can also be programmed using the same IR learning steps.
Image: A step-by-step visual guide for programming the Power button on the G10S PRO BT remote using infrared learning from an existing remote.
Maintenance
- Keep the remote control dry and clean. Avoid exposure to liquids.
- Do not drop or subject the remote to strong impacts.
- If the remote will not be used for an extended period, remove the batteries to prevent leakage.
- Clean the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding in 2.4G mode. | Low batteries, USB receiver not properly connected, or receiver faulty. | Replace batteries. Ensure USB receiver is firmly plugged into a working USB port. Try a different USB port. |
| Remote not pairing in Bluetooth mode. | USB receiver still connected, incorrect pairing procedure, or device incompatibility. | Disconnect the USB receiver. Repeat the Bluetooth pairing steps carefully. Verify your device supports Bluetooth 5.0 and is an Android system. |
| Voice function not working. | Incorrect mode (BT vs. 2.4G), device incompatibility, or microphone issue. | Check if you are in the correct mode for your device (BT for ATV, 2.4G for most Android). Ensure your device supports Google Voice. Speak clearly into the microphone. |
| Air mouse cursor is shaky or unresponsive. | Distance from device, interference, or low batteries. | Move closer to the device. Ensure no obstructions. Replace batteries. |
| IR learning for Power button fails. | Incorrect distance/angle, original remote's battery low, or incompatible IR signal. | Ensure remotes are 2-3 cm apart and aligned. Check batteries in original remote. Repeat steps carefully. |
Specifications
| Feature | Detail |
|---|---|
| Model | G10S PRO BT |
| Shell Material | ABS |
| Connection Modes | 2.4G Wireless, Bluetooth 5.0 |
| Remote Control Distance | More than 10m (32.8ft) |
| Battery Type | 2 x AAA Batteries (Not Included) |
| Special Feature | Ergonomic design, Voice Control, Air Mouse (6-axis gyroscope), Backlight, IR Learning |
| Compatible Devices | Android TV Box, Smart TV, Projector, Computer (2.4G mode); ATV system devices (BT voice mode) |
| Item Weight | 1.94 ounces |
| Package Dimensions | 5.71 x 1.85 x 1.06 inches |
Warranty and Support
For any questions, technical assistance, or warranty inquiries regarding your Pomya G10S PRO BT Air Mouse Smart Voice Remote Control, please contact the manufacturer or your point of purchase. Please refer to your purchase documentation for specific warranty terms and conditions.