1. Introduction
Thank you for choosing the IMEX BELGICA BDZ044-3NG Tall Basin Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new faucet. Please read these instructions carefully before installation and retain them for future reference.
2. Product Overview
The IMEX BELGICA BDZ044-3NG is a modern and functional single-lever tall basin faucet designed for both private and professional use. It features a robust and durable matte black brass body, ensuring a high-quality investment for your bathroom. The faucet is equipped with a 35mm ceramic cartridge, providing precise water control and a long operational lifespan. Flexible hoses are included for easy and efficient installation.
Figure 2.1: Front view of the IMEX BELGICA BDZ044-3NG Tall Basin Faucet. This image shows the sleek, matte black finish and the single lever handle.
3. Safety Information
Please observe the following safety precautions during installation and use:
- Always turn off the main water supply before beginning any installation or maintenance work.
- Ensure all connections are secure to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the faucet's finish, as this may damage it.
- Keep small parts out of reach of children.
4. Package Contents
Verify that all components are present before beginning installation:
- IMEX BELGICA BDZ044-3NG Tall Basin Faucet (1 unit)
- Flexible connection hoses (2 units, 3/8")
- Mounting hardware (gasket, washer, nut)
5. Installation
This faucet is designed for single-hole, deck-mounted installation. Professional installation is recommended.
5.1. Tools Required
- Adjustable wrench
- Phillips head screwdriver
- Plumber's tape (PTFE tape)
- Basin wrench (optional, for tight spaces)
- Safety glasses
5.2. Installation Steps
- Prepare the Installation Area: Turn off the main water supply to the bathroom. Clear the area under the sink for easy access.
- Remove Old Faucet (if applicable): Disconnect water supply lines and mounting hardware from the old faucet. Remove the old faucet from the sink.
- Install Flexible Hoses: Screw the flexible hot and cold water supply hoses into the base of the new faucet. Hand-tighten, then use a wrench for a quarter turn, being careful not to overtighten.
- Position the Faucet: Place the faucet body through the single hole in your basin or countertop. Ensure the rubber gasket is correctly seated between the faucet base and the sink surface to prevent leaks.
- Secure the Faucet: From underneath the sink, slide the metal washer and then the mounting nut onto the threaded shank of the faucet. Hand-tighten the nut, then use a basin wrench or adjustable wrench to firmly secure the faucet to the sink. Do not overtighten.
- Connect Water Supply Lines: Connect the flexible hoses to the hot and cold water supply valves. Use plumber's tape on the threads of the supply valves before connecting the hoses. Connect the hot water hose to the hot water valve and the cold water hose to the cold water valve. Tighten with a wrench.
- Check for Leaks: Slowly turn on the main water supply. Check all connections for leaks. If leaks are detected, tighten the connections slightly until the leak stops.
- Test Operation: Turn on the faucet and check for proper water flow and temperature control.
Figure 5.1: The IMEX BELGICA BDZ044-3NG Tall Basin Faucet installed and in operation, demonstrating water flow into a basin.
6. Operation
The IMEX BELGICA BDZ044-3NG faucet features a single lever for controlling both water flow and temperature.
- Water Flow: Lift the lever upwards to increase water flow. Push the lever downwards to decrease or shut off water flow.
- Temperature Control: Move the lever to the left for hot water and to the right for cold water. Adjust the lever position between left and right to achieve the desired water temperature.
7. Maintenance
Proper care and maintenance will ensure the longevity and appearance of your faucet.
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap and water. Rinse thoroughly and dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or any harsh chemicals, as these can damage the matte black finish and internal components.
- Aerator Maintenance: Periodically unscrew the aerator at the tip of the spout and clean any mineral deposits or debris that may have accumulated. This helps maintain optimal water flow.
- Leak Checks: Periodically check under the sink for any signs of leaks. Address any leaks promptly to prevent water damage.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator; partially closed supply valve; debris in supply line. | Clean aerator; ensure supply valves are fully open; flush supply lines. |
| Leaks from Faucet Base | Loose mounting nut; improperly seated gasket. | Tighten mounting nut; re-seat gasket. |
| Leaks from Handle | Worn cartridge. | Contact IMEX support for a replacement cartridge. |
| No Hot/Cold Water | Supply valve closed; issue with water heater. | Ensure supply valves are open; check water heater functionality. |
9. Specifications
| Brand | IMEX |
| Model Name | BELGICA |
| Model Number | BDZ044-3NG |
| Material | Brass |
| Finish | Matte Black |
| Handle Type | Lever |
| Number of Handles | 1 |
| Number of Holes Required | 1 |
| Installation Type | Deck Mounted |
| Cartridge Type | 35mm Ceramic |
| Recommended Use | Bathroom |
10. Warranty and Support
IMEX products are manufactured to high-quality standards. For warranty information, technical support, or to order replacement parts, please contact your retailer or the IMEX customer service department. Please have your model number (BELGICA BDZ044-3NG) and proof of purchase available when contacting support.
For quick assistance, you may also refer to the seller's information on the product page: NOLUXA GROUP.
