Kinscoter Flame Air Diffuser & Humidifier

Introduction

This manual provides essential information for the safe and effective operation of your Kinscoter Flame Air Diffuser and Humidifier. Please read this manual thoroughly before use and retain it for future reference.

The Kinscoter Flame Diffuser and Humidifier combines the benefits of an essential oil diffuser with a humidifying function, featuring a unique simulated flame effect to enhance your environment. It is designed to create a comfortable and cozy atmosphere in your home or office.

Safety Information

WARNING: Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.

• Always use essential oils with caution and follow the manufacturer's instructions for the essential oils.
• Keep the device and essential oils out of reach of children and pets.
• Avoid direct skin contact with undiluted essential oils.
• Ensure proper ventilation during use.
• Do not use the device without water in the reservoir to prevent dry usage and potential damage. The device features automatic shut-off when water is depleted.
• Use only the provided USB-C cable. The power supply (5V2A USB) is not included and must be purchased separately.
• Do not immerse the device in water or any other liquid.
• Do not block the mist outlet or air inlet during operation.
• Unplug the device before cleaning or refilling.

Package Contents

Please check the package for the following items:

• 1 x Kinscoter Flame Air Diffuser & Humidifier
• 1 x USB-C Cable
• 1 x Instruction Manual (this document)

Note: Essential oils and a 5V2A USB power supply are not included and must be purchased separately.

Product Overview

Figure 1: Front view of the Kinscoter Flame Air Diffuser, showing the mist outlet, control buttons, and decorative flame symbol.

The Kinscoter Flame Air Diffuser features a sleek, rectangular design with a black finish. Key components include:

• Mist Outlet: Located at the top, where the mist and simulated flame effect are emitted.
• Water Tank: Internal reservoir for water and essential oils.
• Control Buttons: Two buttons on the front for power and flame mode selection.
• USB-C Port: Located at the back for power connection.

Setup

1. Unpack the Device: Carefully remove the diffuser and all accessories from the packaging.
2. Place on a Stable Surface: Position the diffuser on a flat, stable, and water-resistant surface away from direct sunlight, heat sources, and electronic devices.
3. Remove the Top Cover: Gently lift the top cover of the diffuser to access the water tank.
4. Fill the Water Tank: Fill the water tank with clean tap water up to the 'MAX' line. Do not overfill. The capacity is 180ml.
   

   Figure 2: Adding water and essential oil to the diffuser's water tank.

5. Add Essential Oils (Optional): Add 2-3 drops of your preferred essential oil directly into the water tank. Adjust the amount based on your preference and the oil's strength.
6. Replace the Top Cover: Securely place the top cover back onto the diffuser. Ensure it is properly aligned.
7. Connect Power: Insert the USB-C cable into the port on the back of the diffuser and connect the other end to a 5V2A USB power adapter (not included).

Operating Instructions

Once the diffuser is set up and connected to power, you can begin operation:

Figure 3: The diffuser in operation, displaying the flame effect.

• Power On/Off: Press the left button (power symbol) once to turn on the diffuser. Press it again to turn off.
• Adjust Flame Mode: Press the right button (flame symbol) to cycle through flame modes:
  • First Press: Activates full flame effect.
  • Second Press: Activates soft flame effect.
  • Third Press: Turns off the flame effect.
• Automatic Shut-off: The diffuser will automatically power off when the water level is too low or completely depleted. This feature prevents dry usage and ensures safety.
  

  Figure 4: Automatic shut-off feature for water depletion.

Maintenance

Regular cleaning helps maintain the performance and longevity of your diffuser.

1. Empty the Water Tank: Before cleaning, unplug the diffuser and empty any remaining water from the tank.
2. Wipe Down: Use a soft, damp cloth to wipe the inside of the water tank and the exterior of the diffuser.
3. Clean the Ultrasonic Plate: Gently wipe the ultrasonic vibrating plate (located at the bottom of the water tank) with a cotton swab dipped in white vinegar or a mild cleaning solution. Do not scratch the plate.
4. Rinse (Optional): If using vinegar, rinse the tank with clean water, being careful not to get water into the air outlet.
5. Dry Thoroughly: Allow all parts to air dry completely before reassembling or storing the diffuser.

Note: Do not use corrosive detergents or hard brushes for cleaning. Clean the diffuser regularly, especially if using strong essential oils or hard water.

Troubleshooting

Specifications

Figure 5: Product dimensions.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided by your retailer or visit the official AWH brand website. Keep your purchase receipt as proof of purchase.

For further assistance, please contact customer service through the platform where you purchased the product.