WHDPETS 4L Timed Automatic Cat Feeder Instruction Manual

Introduction

Thank you for choosing the WHDPETS 4L Timed Automatic Cat Feeder. This device is designed to provide consistent and scheduled meals for your pets, ensuring they are fed even when you are away. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Important Notes:

• Use only a DC 5V power supply.
• Replace batteries every 6 months if not in use for extended periods.
• Suitable for cats and small to medium-sized dogs.
• Fill with dry pet food only; kibble size should be 2-10mm (0.07-0.4 inches) in diameter.

Image: The WHDPETS 4L Timed Automatic Cat Feeder shown with a cat and a dog, featuring a full food tank and a stainless steel bowl.

Product Components

Familiarize yourself with the main parts of your automatic pet feeder:

• Food Tank Lid
• Desiccant Bag Compartment
• Transparent Food Tank (4L capacity)
• Feeder Base with Control Panel (LED display, buttons)
• Food Outlet
• Stainless Steel Food Bowl
• Power Adapter Port (USB-C)
• Battery Compartment (for 3 D-size batteries, not included)
• Pet Feeding Mat (included)
• Lick Pad (included)

Image: A detailed view of the feeder's detachable components, including the lid, desiccant compartment, transparent food tank, and stainless steel bowl.

Setup

1. Unpack and Assemble: Carefully remove all components from the packaging. Ensure all parts listed in the "Product Components" section are present.
2. Install Stainless Steel Bowl: Place the stainless steel bowl into the designated slot at the front of the feeder base.
3. Insert Desiccant Bag: Open the desiccant bag compartment located under the food tank lid. Insert the provided desiccant bag to help keep food fresh. Close the compartment securely.
4. Fill Food Tank: Open the food tank lid and pour dry pet food into the transparent tank. Ensure kibble size is between 2-10mm. Do not overfill. Securely close the lid.
5. Connect Power:
   • Primary Power: Connect the 5V USB-C adapter to the feeder and plug it into a wall outlet.
   • Backup Power (Optional but Recommended): For uninterrupted operation during power outages, install 3 D-size alkaline batteries (not included) into the battery compartment at the bottom of the feeder.
   

   Image: Illustration of the dual power supply system, showing the 5V DC adapter and the compartment for 3 D-size batteries.
6. Initial Check: Once powered, the LED display should light up.

Operating Instructions

Programming Feeding Schedule

The feeder allows you to set 1-6 meals daily, with up to 40 portions per meal (approximately 7g per portion).

1. Access Program Mode: Press and hold the "SET" button until the meal indicator on the LED display starts blinking.
2. Set Meal Time: Use the "+" and "-" buttons to adjust the hour and minute for the first meal. Press "SET" to confirm and move to the next setting.
3. Set Portions: Use the "+" and "-" buttons to select the number of portions (1-40) for this meal. Press "SET" to confirm.
4. Repeat for Additional Meals: Repeat steps 2 and 3 for up to 6 meals. If you wish to set fewer than 6 meals, simply exit the program mode after setting your desired number of meals.
5. Save Settings: The settings will automatically save after a few seconds of inactivity in program mode, or you can press and hold "SET" to exit.

Image: An infographic illustrating the programmable feeding schedule, showing multiple meal times and adjustable portion sizes, with a cat observing the feeder.

Customizing Voice Message

Record a 10-second voice message to call your pet at meal times.

1. Enter Record Mode: Press and hold the microphone button (usually located near the control panel) until you hear a beep.
2. Record Message: Speak clearly into the microphone for up to 10 seconds.
3. Save Message: Release the microphone button. You will hear another beep indicating the message is saved. The recorded message will play automatically at each scheduled meal time.

Image: A cat looking towards the feeder, with a visual representation of a voice message being played, indicating the 10-second voice recording feature.

Manual Feeding

To dispense food instantly outside of the scheduled times:

• Press the manual feeding button (often labeled with a paw print or similar icon) once to dispense one portion. You can press it multiple times for additional portions.

Image: A cat observing the automatic feeder as it dispenses kibble into the bowl, demonstrating the automatic feeding function.

Maintenance

Regular cleaning and maintenance ensure the longevity and hygienic operation of your pet feeder.

1. Disassembly for Cleaning: The food tank lid, food tank, and stainless steel bowl are detachable for easy cleaning.
2. Cleaning the Food Tank and Bowl: Wash the food tank and stainless steel bowl with water and mild detergent. Rinse thoroughly and ensure they are completely dry before reassembly.
3. Cleaning the Feeder Base: Wipe the feeder base with a damp cloth. Do not submerge the base in water, as it contains electronic components.
4. Desiccant Bag Replacement: Replace the desiccant bag periodically (e.g., monthly) to maintain food freshness.
5. Battery Check: If using backup batteries, check their charge level regularly, especially if the feeder is not connected to AC power. Replace batteries every 6 months if not in use for a long time.

Image: The detachable components of the feeder (lid, food tank, stainless steel bowl) shown separately, emphasizing the ease of cleaning.

Troubleshooting

If you encounter issues with your WHDPETS Automatic Cat Feeder, please refer to the following common solutions:

• Feeder Not Powering On:
  • Ensure the power adapter is securely plugged into both the feeder and a working wall outlet.
  • If using batteries, check if they are inserted correctly and have sufficient charge. Replace if necessary.
• Food Not Dispensing:
  • Check if the food tank is empty.
  • Ensure the food tank is properly seated and the lid is closed.
  • Verify that the kibble size is within the recommended 2-10mm range. Larger kibble may cause blockages.
  • Clean the food outlet and rotor mechanism for any obstructions.
  • Check programmed meal times and portions on the LED display.
• Voice Message Not Playing:
  • Ensure a message has been successfully recorded. Try re-recording.
  • Check the volume settings if available (though not explicitly mentioned, it's a common feature).
• Display Not Working Correctly:
  • Try disconnecting and reconnecting the power supply.
  • If using batteries, replace them.

If problems persist, please contact customer support for further assistance.

Specifications

Image: A diagram showing the physical dimensions of the WHDPETS automatic pet feeder, including its height, width, and depth, along with the dimensions of the feeding mat.

Warranty and Support

For warranty information, please refer to the documentation included with your purchase or visit the official WHDPETS website. If you require technical support or have questions not covered in this manual, please contact WHDPETS customer service.