Donerton Wireless Earbuds User Manual

Introduction

The Donerton Wireless Earbuds (Model A20) are designed to provide a high-quality audio experience with advanced features for various activities. These earbuds feature Bluetooth 5.3 for stable connectivity, CVC 8.0 noise cancellation for clear calls, and a comfortable, secure fit with flexible ear hooks. The charging case includes a dual LED display for battery monitoring and offers extended playtime.

What's in the Box

• Black workout headphones with ear hook x 2 (L/R)
• Portable USB C charging case with LED Display x 1
• Type C cable x 1
• Ear caps x 3 Pairs (S, M, L)
• User manual x1

Product Overview

The Donerton A20 Wireless Earbuds are designed for comfort and performance, featuring a secure over-ear hook design and intuitive touch controls.

Figure 1: Donerton Wireless Earbuds and Charging Case.

Figure 2: The earbuds feature soft, secure-fitting silicone ear hooks and come with three pairs of ear caps (S, M, L) for optimal comfort and fit.

Figure 3: Smart Touch Controls for managing audio playback, calls, and voice assistant.

Figure 4: Dual LED displays on the charging case show the battery percentage of the case and the charging status of each earbud.

Setup

Initial Charging

Before first use, fully charge the earbuds and the charging case. Connect the provided USB-C cable to the charging case and a power source. The LED display will indicate charging progress.

Pairing with Your Device

The earbuds feature one-step pairing for convenience.

1. Take the earbuds out of the charging case. They will automatically enter pairing mode.
2. On your device (smartphone, tablet, etc.), enable Bluetooth.
3. Search for "A20" in the list of available Bluetooth devices and select it to connect.
4. Once connected, the earbuds are ready for use.

Figure 5: Resetting the earbuds for re-pairing or troubleshooting connection issues.

For re-pairing or if only one earbud connects, place both earbuds back into the charging case. Press and hold the reset button on the charging case for 8 seconds. Then, on your device, go to Bluetooth settings, "Forget This Device" for "A20", and then turn Bluetooth off and on again to re-pair.

Operating Instructions

Touch Controls

Each earbud features a multi-function touch button for easy control:

Power On/Off

• Power On: Take the earbuds out of the charging case. They will automatically power on.
• Power Off: Place the earbuds back into the charging case. They will automatically power off and begin charging.
• Alternatively, you can long press the touch button on either earbud until you hear "power off" to manually turn them off.

Maintenance

Cleaning

Regularly clean your earbuds and charging case to ensure optimal performance and hygiene. Use a soft, dry, lint-free cloth. For ear tips, you can gently wipe them with a slightly damp cloth and allow them to air dry completely before reattaching.

Water Resistance (IP7)

The Donerton A20 earbuds are IP7 waterproof, meaning they are protected against temporary immersion in water (up to 1 meter for 30 minutes). This makes them suitable for sports and workouts where they may be exposed to sweat or light rain. However, they are not designed for swimming or prolonged submersion. Ensure the charging port is dry before charging.

Troubleshooting

• Only one earbud connected: Place both earbuds back into the charging case. Hold the reset button on the charging case for 8 seconds. Then, on your device, "Forget" the "A20" Bluetooth connection, turn Bluetooth off and on, and re-pair.
• Earbuds not charging: Ensure the charging cable is securely connected to both the case and the power source. Check for any debris in the charging port. Make sure the earbuds are properly seated in the charging case and the charging contacts are clean.
• Poor sound quality: Ensure the earbuds are fully charged. Check if the ear tips are the correct size for a snug fit. Clean any earwax or debris from the earbud speakers. Move closer to your connected device to avoid interference.
• Earbuds not pairing: Make sure the earbuds are out of the charging case and in pairing mode (indicated by flashing lights). Ensure Bluetooth is enabled on your device. Try resetting the earbuds as described in the "Setup" section.

Specifications

Warranty and Support

Donerton products typically come with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact Donerton customer service through their official website or the retailer where the product was purchased.

You can visit the official Donerton store for more information: Donerton Store