Introduction
Thank you for choosing the eppfun LD100 RGB Headphone Stand. This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your new headphone stand. Please read this manual carefully before use to ensure proper functionality and to maximize your product experience.
Product Overview
Components
- Base Unit with RGB lighting and USB ports
- Support Bar with integrated RGB lighting
- Headset Hanger Bracket
Features
- Dynamic RGB LED lighting with sound-sensing function
- Integrated USB hub with 1 Type-C input and 2 Type-C/USB output interfaces
- Plug-and-play functionality, no drivers required
- Easy assembly and disassembly for portability and storage
- Compatible with most headphones and headsets
Figure 1: The eppfun LD100 RGB Headphone Stand in a typical desktop setup, showcasing its design and RGB lighting.
Setup Instructions
Assembly
- Carefully unpack all components: the base, the support bar, and the headset hanger bracket.
- Align the support bar with the slot on the base unit. Ensure the three contact pins on the bottom of the support bar connect properly with the contacts in the base.
- Gently push the support bar firmly into the base until it is securely seated. A proper connection is crucial for the RGB lighting on the support bar to function.
- Attach the headset hanger bracket to the top of the support bar.
Initial Connection
Connect the eppfun LD100 stand to your computer or power source using a USB-C cable (not included). The stand is plug-and-play, requiring no additional drivers for basic functionality. If connecting to a computer, the operating system may detect it as an audio device. If you experience unexpected audio routing, adjust your computer's sound settings to select your preferred audio output device.
Operating Instructions
RGB Lighting Control
The eppfun LD100 features two control buttons on the front of the base unit. One button controls the RGB lighting for the support bar, and the other controls the RGB lighting for the base. Press these buttons to cycle through various lighting modes and colors. The support bar's lighting also includes a sound-sensing function, allowing it to react and flash in sync with music or game audio.
Figure 2: Examples of the various RGB lighting modes available on the eppfun LD100 Headphone Stand, illustrating customizable aesthetics.
USB Port Usage
The stand is equipped with three interfaces: one Type-C input for power and data connection to your host device (e.g., PC), and two output interfaces (Type-C and standard USB-A). These output ports can be used to charge headphones, mobile phones, or connect other USB devices such as U disks.
Maintenance
To maintain the appearance and functionality of your eppfun LD100 Headphone Stand, wipe it regularly with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or electronic components. Ensure the stand is disconnected from power before cleaning.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| RGB lights on support bar not illuminating. | Support bar not fully seated or contact pins misaligned. | Gently push the support bar further into the base, ensuring the contact pins make full connection. |
| Computer not recognizing connected audio device or USB peripherals. | Incorrect audio output selected; loose USB connection; driver conflict. | Check your computer's sound settings and select the correct audio output. Ensure all USB cables are securely connected. Try connecting the device directly to the computer to rule out stand-related issues. Update or reinstall USB drivers if necessary. |
| Headphones are unstable or tend to fall off the stand. | Headphone design (e.g., plastic arch) may not provide sufficient grip. | Exercise caution when placing headphones, especially those with smooth or plastic headbands. Ensure they are balanced on the hanger. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LD100 |
| Brand | eppfun |
| Color | Black |
| Item Weight | 230 Grams (8.1 ounces) |
| Package Dimensions | 12.36 x 6.46 x 1.65 inches |
| Compatible Devices | Headphones, headsets, USB devices |
| Interfaces | 1x Type-C Input, 2x Type-C/USB Output |
| Date First Available | August 16, 2022 |
Warranty and Support
The eppfun LD100 RGB Headphone Stand comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and includes a free replacement for defective products within this period.
For technical support, warranty claims, or any questions regarding your product, please contact eppfun customer service through the retailer's platform or visit the official eppfun website for contact information.
