BTF-LIGHTING SP620E USB Bluetooth Mini Controller User Manual

Introduction

This manual provides comprehensive instructions for the BTF-LIGHTING SP620E USB Bluetooth Mini Controller. This device is designed to control addressable LED pixel strip lights, offering various lighting effects, music synchronization, and smart control options via a mobile application and an infrared remote.

Product Overview

The SP620E controller is a compact and versatile solution for managing your LED lighting projects. It features a USB power input and supports popular IC chip types for addressable LEDs. Key functionalities include:

• Bluetooth connectivity for app control.
• Built-in microphone for music synchronization.
• Timer function for automated operation.
• Group control for managing multiple controllers simultaneously.
• Infrared (IR) remote control for basic functions.
• Compatibility with WS2811, WS2812B, SK6812RGB (not RGBW), 1903, 6803, and similar IC chips.

Specifications

Safety Information

Please observe the following safety guidelines to ensure proper operation and prevent damage:

• Ensure the power supply is strictly DC 5V. Using a higher voltage will damage the controller.
• Do not exceed the maximum number of LEDs supported by the controller (less than 100 LEDs). Overloading can cause malfunction or damage.
• Avoid exposing the controller to moisture or extreme temperatures. This product is designed for indoor use only.
• Handle the controller and wiring with care to prevent loose connections or damage to components.

Setup

1. Power Connection

Connect the USB plug of the SP620E controller to a stable DC 5V USB power source. Ensure the power source can provide sufficient current for your LED strip. Insufficient power can lead to unstable operation.

Power Consumption Note:

• For 1 color (red, green, blue, or pure white): Approximately 0.1W per LED.
• For 2 colors (e.g., red + green): Approximately 0.2W per LED.
• For 3 colors (red + green + blue = mixed white): Approximately 0.3W per LED.

2. LED Strip Connection

Connect your compatible addressable LED pixel strip to the controller's output connector. Ensure the data (DAT), ground (GND), and +5V connections are correctly aligned with your LED strip. This controller supports IC chip types such as WS2811, WS2812B, SK6812RGB (not RGBW), 1903, and 6803.

Image: The SP620E USB Bluetooth Mini Controller with its included IR remote control. The controller features a USB plug for power and a 3-pin connector for the LED strip.

3. App Installation and Pairing

Download the "BanlanX" application from your mobile device's app store. Once installed:

1. Open the BanlanX app.
2. Ensure Bluetooth is enabled on your mobile device.
3. The app will automatically search for available SP620E controllers. Select your controller from the list to pair.
4. You can use the app as a guest or create an account to save your favorite settings.

Image: Screenshots of the BanlanX mobile application interface, showing options for timer, music, dynamic effects, and solid color control.

Operating Instructions

1. IR Remote Control

The included IR remote provides quick access to essential functions:

• ON/OFF: Power the LED strip on or off.
• W: Activates white light.
• R, G, B: Selects Red, Green, or Blue colors. (Note: Some remotes may have R and G buttons swapped in function).
• Color Buttons: Direct selection of various static colors.
• Brightness/Speed Adjustment: Buttons with arrows or 'M' symbols may adjust brightness for static colors or speed for dynamic effects.
• Mode Selection: Buttons with musical notes or 'M' symbols cycle through dynamic and music lighting effects.

2. App Control (BanlanX)

The BanlanX app unlocks the full potential of your SP620E controller:

Music Synchronization

The controller features a built-in high-sensitivity microphone, allowing the LED lights to react to ambient sound. The app offers three methods for music collection:

• Mobile phone microphone
• Player streaming
• Built-in microphone (on the controller)

The light and color spectrum automatically adjust according to the music or sound detected.

Image: Illustration of the music synchronization feature, showing LED lights reacting to music in a room setting.

Timer Function

Set schedules for your LED lights to turn on or off automatically, aligning with your daily routine.

Group Control

Manage multiple SP620E controllers simultaneously by creating groups within the app. Up to 5 controllers can be assigned to a single group, and you can create numerous groups for different lighting zones.

Image: Screenshots demonstrating the timer configuration interface and the group control feature within the BanlanX app, alongside an outdoor LED light display.

Color Calibration

If the colors displayed in the app do not match the actual colors of your LED strip, use the color calibration feature in the app to adjust and synchronize them.

Dynamic Effects and Static Colors

The app provides access to 16 million monochrome colors, 142 kinds of chasing color effects, and 18 kinds of music lighting effects, offering extensive customization for your lighting environment.

Image: A living room illuminated with various dynamic and static LED color options, showcasing the versatility of the controller.

Troubleshooting

Common Issues and Solutions:

• Controller loses control, LED strip frozen, remote not working, Bluetooth disconnected: This often indicates an insufficient power supply. Ensure your 5V USB power source provides enough current for the number of LEDs connected. Refer to the "Power Consumption Note" in the Setup section.
• App colors inconsistent with LED strip colors: Use the "Color Calibration" feature within the BanlanX app to adjust and match the colors.
• No Bluetooth connection: Verify that Bluetooth is enabled on your mobile device and that the controller is powered on. Restart the app or controller if necessary.
• Red and Green buttons on IR remote appear swapped: Some remote controls may have the Red and Green color buttons functionally reversed. This is a known variation and does not affect overall functionality.
• LEDs acting erratically or not lighting up: Check all wiring connections (DAT, GND, +5V) between the controller and the LED strip for proper alignment and secure contact. Ensure the LED strip is compatible with the supported IC chip types.

Maintenance

To ensure the longevity and optimal performance of your BTF-LIGHTING SP620E controller:

• Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
• Store the controller in a dry environment, away from direct sunlight and extreme temperatures.
• Avoid physical impact or excessive force on the controller or its connectors.

Warranty and Support

For warranty information, technical support, or any inquiries regarding your BTF-LIGHTING SP620E controller, please contact the manufacturer or your point of purchase. Refer to the product packaging or the official BTF-LIGHTING website for contact details.