ABZXT SPBR121X2

ABZXT Solar Powered Lamp with Remote Control SPBR121X2 User Manual

Model: SPBR121X2

1. Introduction

This manual provides detailed instructions for the safe and efficient use of your ABZXT Solar Powered Lamp with Remote Control. This portable LED bulb system is designed for various applications, including home use, camping, emergency lighting, and outdoor activities.

The system primarily consists of a solar panel, an LED light bulb, and an integrated battery. The solar panel converts sunlight into electrical energy, which is then stored in the bulb's battery for later use. The bulb can also be charged via a DC 5V adapter using a USB cable.

2. Safety Information

  • Water Resistance: The solar panel is rainproof, but the LED bulb itself is not waterproof. Avoid exposing the bulb to water or high humidity to prevent damage.
  • Charging: Use only the provided solar panel or a compatible DC 5V adapter for charging. Do not use chargers with higher voltage.
  • Battery Care: Do not attempt to open or replace the internal lithium battery. Dispose of the product responsibly according to local regulations when it reaches its end of life.
  • Placement: Ensure the solar panel is placed in direct sunlight for optimal charging. Avoid shaded areas.
  • Temperature: Do not expose the product to extreme temperatures or open flames.

3. Package Contents

Verify that all items are present in your package:

  • 1 x ABZXT Solar Powered LED Bulb (350LM)
  • 1 x Solar Panel with USB Cable
  • 1 x Remote Control
  • 1 x USB Charging Cable
ABZXT Solar Powered Lamp with Remote Control components
Image 1: Contents of the ABZXT Solar Powered Lamp package, showing the LED bulb, solar panel, and remote control.

4. Product Overview

The ABZXT Solar Powered Lamp is designed for portability and energy efficiency. Key components and features include:

  • LED Bulb: 12 LEDs, 350 Lumens, 5500-6500K natural white light.
  • Rechargeable Battery: 850mAh/3.7V Lithium battery, providing 5-8 hours of continuous light on a full charge.
  • Solar Panel: Converts solar energy to electricity for charging the bulb. Rainproof design.
  • USB Charging Port: Allows charging via solar panel or a DC 5V adapter.
  • Remote Control: Operates power, light modes, and timer functions from up to 5 meters away.
  • Integrated Hook: For easy hanging in various locations.
LED bulb with hanging hook
Image 2: Close-up of the LED bulb, highlighting the integrated hanging hook for versatile placement.
Solar panel for charging
Image 3: The solar panel component, responsible for converting sunlight into energy for the bulb.

5. Setup and Charging

5.1 Initial Charging

Before first use, ensure the bulb is fully charged. You have two charging options:

  1. Solar Charging:
    • Place the solar panel outdoors in a location with direct, unobstructed sunlight.
    • Connect the solar panel's USB cable to the charging port on the LED bulb.
    • The charging indicator light on the bulb will turn red during charging. It remains red when fully charged.
    • A full charge typically takes 5-6 hours under sufficient sunlight.
  2. USB Adapter Charging:
    • Connect the provided USB charging cable to the bulb's charging port and to a DC 5V USB power adapter (not included) or a power bank.
    • The charging indicator light will turn red during charging and remain red when fully charged.
    • Charging time will vary depending on the power source.
LED bulb connected to solar panel showing charging indicator
Image 4: The LED bulb connected to the solar panel, illustrating the charging process and the red charging indicator light.

5.2 Installation

Once charged, the bulb can be used as a portable light source. For fixed installations:

  • Hang the LED bulb using its integrated hook in your desired location (e.g., tent, shed, room).
  • If using solar power, ensure the solar panel is positioned to receive maximum direct sunlight. The cable can be routed indoors to connect to the bulb.
LED bulb hanging inside a camping tent
Image 5: The LED bulb hanging inside a camping tent, demonstrating its use in outdoor settings.

6. Operating Instructions

The ABZXT Solar Powered Lamp is operated using the included remote control. The remote control has a range of approximately 5 meters.

Remote control for the LED light bulb with button descriptions
Image 6: The remote control, showing buttons for power, mode selection, auto light sensor, and timer functions.
  • Power On/Off:
    • Press the ON button to turn the light on.
    • Press the OFF button to turn the light off.
  • Light Modes: Press the MODE button to cycle through the following light settings:
    • Mode 1: High Light (350 Lumens)
    • Mode 2: Medium Light (approx. 180 Lumens)
    • Mode 3: Low Light (approx. 90 Lumens)
    • Mode 4: SOS Flash (Emergency signal)
  • Automatic Light Sensor: Press the AUTO button to activate the light sensor function. When charging via the solar panel, the bulb can automatically turn off during daylight hours.
  • Timer Functions: Use the timer buttons to set the duration the light remains on:
    • 30min: Light stays on for 30 minutes.
    • 2h: Light stays on for 2 hours.
    • 4h: Light stays on for 4 hours.
    • 8h: Light stays on for 8 hours.

The bulb can be used for various purposes, such as providing light for reading, camping, or in areas like chicken coops.

Family reading with the solar lamp
Image 7: The solar lamp providing illumination for a family reading indoors, demonstrating its versatility.
Solar lamp illuminating chicks in a coop
Image 8: The solar lamp providing light inside a chicken coop, useful for agricultural applications.

7. Maintenance

  • Cleaning: Wipe the solar panel and LED bulb with a soft, damp cloth to remove dust and dirt. Do not use abrasive cleaners or solvents.
  • Water Exposure: Remember that the LED bulb is not waterproof. Protect it from rain and moisture. The solar panel is rainproof and can withstand outdoor conditions.
  • Storage: If storing the lamp for an extended period, ensure the battery is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.

8. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.Battery is depleted.Charge the bulb fully using the solar panel or a DC 5V adapter.
Solar panel not charging effectively.Insufficient sunlight or panel is dirty.Relocate the solar panel to a spot with direct sunlight. Clean the surface of the solar panel.
Remote control not working.Remote battery depleted or obstruction.Ensure there are no obstructions between the remote and the bulb. Replace the remote control battery if necessary.
Light blinks or is dim.Low battery or incorrect mode.Recharge the bulb. Cycle through light modes using the MODE button on the remote.

9. Specifications

Model NumberSPBR121X2
Light Source TypeLED (12 Emitters)
Luminous Flux350 Lumens
Color Temperature5500-6500K (Natural White)
Rated Power1.5 Watts
VoltageDC 5V (Charging), 8 Volts (Operating)
Battery TypeLithium-Ion
Battery Capacity850mAh / 3.7V
Battery Life (Full Charge)5-8 hours (continuous effective lighting)
Charging Time (Solar)5-6 hours (under sufficient sunlight)
Lifespan> 50,000 hours
Remote Control DistanceUp to 5 meters (164 ft)
MaterialPlastic
Item Weight125 Grams (approx. 4.4 ounces)
CertificationsFCC
Dimensions of the solar panel and LED bulb
Image 9: Diagram showing the dimensions of the solar panel (70mm x 115mm) and the LED bulb (62mm diameter x 108mm height).

10. Warranty and Support

This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact the seller directly.

If you encounter any issues or have questions regarding your ABZXT Solar Powered Lamp, please contact ABZXT customer support or your retailer for assistance. Please have your model number (SPBR121X2) and purchase information ready.

© 2023 ABZXT. All rights reserved.