LEFXMOPHY MX24W1-2401000U Charger Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your LEFXMOPHY MX24W1-2401000U Power Adapter. This charger is specifically designed as a replacement or alternative power supply for the RENPHO C3 RF-GM168 Percussion Massage Gun. Please read this manual thoroughly before use and retain it for future reference.

Figure 1: LEFXMOPHY MX24W1-2401000U Power Adapter. This image shows the complete power adapter unit, including the wall plug, power brick, and the DC barrel connector cable.

2. Important Safety Information

• Read all instructions: Before using the power adapter, read all safety and operating instructions.
• Intended Use: This adapter is designed exclusively for the RENPHO C3 RF-GM168 Percussion Massage Gun. Do not use it with other devices unless specified by the manufacturer.
• Power Source: Connect the adapter only to a power outlet with the voltage specified in the specifications (100-240V AC).
• Avoid Water: Do not expose the adapter to water or moisture. Do not operate with wet hands.
• Damage: Do not use the adapter if the cord or plug is damaged. Contact customer support for replacement.
• Ventilation: Ensure adequate ventilation around the adapter during use. Do not cover it.
• Children: Keep out of reach of children.
• Disconnect: Always unplug the adapter from the power outlet when not in use or before cleaning.
• Protection: This adapter is UL, CE, FCC, and RoHS certified and includes over-voltage, over-load, over-current, and short circuit protection. However, proper handling is still essential.

3. Setup Instructions

1. Inspect the Adapter: Before first use, visually inspect the power adapter and its cable for any signs of damage.
2. Identify the Charging Port: Locate the DC input port on your RENPHO C3 RF-GM168 Percussion Massage Gun. This adapter uses a round DC barrel connector.


Figure 2: Close-up of the DC Barrel Connector. This image highlights the specific type of connector used by the LEFXMOPHY charger.

3. Connect to Massage Gun: Carefully insert the DC barrel connector of the LEFXMOPHY adapter into the charging port of your RENPHO C3 massage gun. Ensure a snug fit.


Figure 3: Adapter connected to RENPHO C3 Massage Gun. This image demonstrates the correct way to connect the charger to the massage gun's charging port.

4. Plug into Power Outlet: Insert the AC plug of the adapter into a standard 100-240V AC wall outlet.

4. Operating Instructions

Once the adapter is correctly connected to both the massage gun and a power outlet, the RENPHO C3 massage gun should begin charging. Refer to your RENPHO C3 massage gun's user manual for specific charging indicators (e.g., LED lights) and expected charging times.

• Ensure the massage gun is turned OFF before connecting the charger.
• Do not force the connector into the port.
• Unplug the adapter from the wall outlet and the massage gun once charging is complete or if the device will not be used for an extended period.

5. Care and Maintenance

• Cleaning: Disconnect the adapter from the power source and the device before cleaning. Wipe the adapter with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid wrapping the cable too tightly around the adapter to prevent damage.
• Handling: Do not pull the cable to disconnect the adapter from the wall outlet or the device. Always grasp the plug or connector directly.

6. Troubleshooting

7. Product Specifications

8. Warranty and Support

For warranty information or technical support regarding your LEFXMOPHY MX24W1-2401000U Power Adapter, please refer to the documentation provided at the time of purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.