Discovery #Mindblown Build-A-Blizzard Snow Making Experiment Set

1. Introduction

The Discovery #Mindblown Build-A-Blizzard Snow Making Experiment Set provides a hands-on opportunity to explore the science of polymers and molecules by creating lifelike snow. This kit is designed to be an engaging educational tool for children aged 6 and up, fostering curiosity and scientific understanding.

Image 1.1: The kit offers hands-on learning to understand polymers and molecules through snow creation.

2. Safety Information

While the synthetic polymer in this set is generally considered non-toxic, it is crucial to follow all safety guidelines to ensure a safe and enjoyable experience. Adult supervision is highly recommended for children using this kit.

• Adult Supervision: Always ensure an adult is present during experiments.
• Avoid Ingestion: Do not ingest the snow powder or the created snow. Ingestion may cause discomfort or illness.
• Eye Contact: Avoid direct contact with eyes. In case of contact, rinse thoroughly with water.
• Clean Up: Clean up any spills immediately to prevent slipping or accidental ingestion.
• Storage: Store all components out of reach of young children and pets.
• Disposal: Dispose of used snow and powder according to local regulations.

3. What's Included

Your Discovery #Mindblown Build-A-Blizzard Snow Making Experiment Set includes the following components:

• Instant Snow Powder
• Glitter Powder
• Beaker
• Scoop

Image 3.1: All components included in the Build-A-Blizzard Snow Making Experiment Set.

4. Setup

Before beginning your experiment, ensure you have a clean, flat, and stable workspace. It is advisable to cover your work surface with newspaper or a protective mat for easy cleanup.

1. Unpack all components from the kit.
2. Gather a small amount of tap water.
3. Ensure the beaker and scoop are clean and dry.

5. Operating Instructions

5.1 Making Instant Snow

Follow these steps to create lifelike snow:

1. Using the provided scoop, place one scoop of Instant Snow Powder into the beaker.
2. Slowly add approximately 60ml (2 fl oz) of water to the beaker.
3. Observe as the powder rapidly absorbs the water and expands, transforming into fluffy, lifelike snow within seconds.
4. If the snow appears too dry, add a few more drops of water until the desired consistency is achieved. If it's too wet, allow it to sit for a few minutes to absorb excess moisture.

5.2 Adding Glitter

To add a sparkling effect to your snow:

1. Once the snow has formed, sprinkle a small amount of Glitter Powder over the snow.
2. Gently mix the glitter into the snow using the scoop or your fingers.

Image 5.2: The created snow can be enhanced with glitter for a sparkling effect.

5.3 The Science Behind the Snow

The instant snow is made from a superabsorbent polymer, typically sodium polyacrylate. This polymer consists of long chains of molecules that can absorb hundreds of times their weight in water. When water is added, the polymer chains swell, creating a fluffy, snow-like texture. This process demonstrates the principles of polymer chemistry and absorption.

6. Maintenance

6.1 Cleaning

• After use, empty the snow from the beaker.
• Rinse the beaker and scoop with warm water.
• Allow all components to air dry completely before storing.

6.2 Storage

• Store the Instant Snow Powder and Glitter Powder in their original sealed containers in a cool, dry place.
• Keep all kit components together in a designated storage area to prevent loss.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For any questions regarding the product, warranty information, or technical support, please contact the manufacturer, Discovery, directly. Refer to the product packaging for specific contact details or visit the official Discovery website.