ANCEL HD601 PRO Heavy Duty Truck Scanner and BA301 Battery Load Tester User Manual

Introduction

This manual provides comprehensive instructions for the ANCEL HD601 PRO Full System Heavy Duty Truck Scanner and the ANCEL BA301 6V 12V Car Battery Load Tester. It covers product setup, operational procedures, maintenance, and troubleshooting to ensure optimal performance and accurate diagnostics.

Figure 1: ANCEL HD601 PRO Truck Scanner and BA301 Battery Tester devices.

What's in the Box

• 1x HD601 PRO Heavy Duty Truck Scan Tool
• 1x BA301 Battery Tester
• 1x OBD2 16 PIN Cable
• 1x Diesel 6 / 9 PIN Cable
• 1x USB Upgrade Cable
• 1x Storage Bag
• 1x User's Manual

Figure 2: Included items in the product package.

Key Features

• Extensive Compatibility: Supports major truck models with SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4, ISO 9141-2, ISO 27145-4, and Euro6 protocols. Also diagnoses most cars, minivans, and light trucks from 1996 onwards.
• OE-Level Full System Diagnostic: Scans Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc., for heavy trucks.
• Enhanced Diesel OBD Scanner: Reads/clears codes, displays live data (text/graphic), retrieves vehicle info, views freeze frames, and looks up DTCs. Includes 6, 9, and 16 pin cables.
• Powerful Battery Application: BA301 works on all 6V and 12V lead-acid batteries (100 to 2000 CCA), including regular flood, AGM flat, AGM spiral, GEL, and EFB batteries.

Setup Instructions

HD601 PRO Truck Scanner Setup

1. Locate the vehicle's diagnostic port. For heavy-duty trucks, this is typically a 6-pin or 9-pin connector. For cars/light trucks, it's a 16-pin OBD2 port.
2. Select the appropriate cable (6-pin, 9-pin, or 16-pin) and connect it to the HD601 PRO device.
3. Connect the other end of the cable to the vehicle's diagnostic port.
4. Turn the vehicle's ignition to the 'ON' position (do not start the engine unless performing specific tests that require it). The device will power on automatically.

Figure 3: HD601 PRO with various diagnostic connectors (6-pin, 9-pin, 16-pin).

BA301 Battery Tester Setup

1. Ensure the vehicle's ignition is off and all accessories are turned off.
2. Connect the red clamp of the BA301 to the positive (+) terminal of the battery.
3. Connect the black clamp of the BA301 to the negative (-) terminal of the battery.
4. The BA301 device will power on automatically.

Operating Instructions

HD601 PRO Diagnostic Functions

After connecting the HD601 PRO to the vehicle, navigate the menu using the arrow keys and 'OK' button.

• Fast Scan: Select 'HD OBD' from the main menu, then 'Fast Scan' to quickly identify systems and potential issues.
• Read Codes: In the 'HD OBD' menu, select 'Read Codes' to view current, pending, or permanent diagnostic trouble codes (DTCs).
• Clear Codes: After addressing the fault, select 'Clear Codes' to turn off the Check Engine Light (CEL).
• Live Data: Choose 'Live Data' to view real-time sensor data in text or graphical format. This is useful for monitoring engine parameters and identifying intermittent issues.
• ECU Information: Access 'ECU Information' to retrieve details about the vehicle's Engine Control Unit, including VIN, calibration IDs, and calibration verification numbers.

Figure 4: HD601 PRO displaying various OBDII functions including Read Codes, Erase Codes, Data Stream, DTC Lookup, Freeze Frame, and Vehicle Information.

Figure 5: Using the HD601 PRO to check and turn off the Check Engine Light.

BA301 Battery Testing Functions

After connecting the BA301 to the battery, select 'BAT' from the main menu to access battery testing options.

• Battery Test: Performs a comprehensive analysis of the battery's health, charge, internal resistance, and rated CCA.
• Cranking Test: Measures the battery's ability to start the engine.
• Charging Test: Evaluates the vehicle's charging system (alternator).
• Waveform Analysis: Provides a real-time voltage waveform to analyze battery performance.

Figure 6: BA301 Battery Tester showing various testing functions like State of Charge, State of Health, Charging Test, Cranking Test, and Waveform Analysis.

Figure 7: BA301 Battery Tester displaying quick check results for battery, starter, and alternator status (Good, Charge, Bad).

Compatibility

HD601 PRO Truck Scanner

The HD601 PRO supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4, ISO 9141-2, ISO 27145-4, and Euro6). This includes brands such as Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Maxxforce, BendixWabash, Wabaco, Haldex, Allison, and Eaton. It also supports engine diagnosis on most cars, minivans, and light trucks from 1996 and later.

Figure 8: Compatibility chart for various truck brands and systems supported by HD601 PRO.

Figure 9: Table showing wide coverage for various duty trucks, commercial vehicles, and machinery brands. Note: Compatibility may vary by specific vehicle configurations and engine brands.

BA301 Battery Tester

The BA301 works on all 6V and 12V lead-acid batteries from 100 to 2000 CCA. This includes regular flood batteries, AGM flat batteries, AGM spiral batteries, GEL, and EFB batteries. It supports most battery standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, and SAE.

Figure 10: BA301 Battery Tester compatibility with various battery types and measuring standards.

Maintenance

Software Updates

The HD601 PRO offers lifetime free software updates to ensure compatibility with new vehicle models and diagnostic protocols. Regular updates are recommended for optimal performance.

1. Connect the HD601 PRO to your computer via the USB cable.
2. Log on to the ANCEL website (anceltech.com) and navigate to the Download Center.
3. Select the product model (HD601) and download the update software.
4. Enter 'Upgrade' mode on the HD601 PRO device.
5. Click 'Update' on the computer software.
6. Wait for the update to complete.

Figure 11: Step-by-step guide for updating the HD601 PRO software.

If you encounter a 'Pressure sensor D calibration' message, it indicates an outdated database version. Please update your software to the latest version. Software update tutorial videos and download packages are available on the ANCEL website.

Troubleshooting

• Why can't I erase the fault code?
  1. Fix the problem causing the fault code before clearing it.
  2. Ensure the scanner is properly connected to the OBD port.
  3. Check compatibility. If unsure, provide vehicle information to the reseller for assistance.
• Will it support full diagnosis for heavy-duty trucks, including ABS and transmission systems?

  Yes, it can diagnose ABS or transmission systems if they are compatible with Standard SAE J1939 or SAE J1708 protocols.

• Can the HD601 device support Full OBDII functionality?

  The HD601 PRO is primarily designed as a code reader for North American heavy-duty trucks. It may not fully support very old passenger cars, such as pre-2008 Ford or GM models.

• Can the HD601 support HINO, Isuzu, FUSO, and UD trucks?

  If the trucks use engines manufactured by their respective companies, the product may not be supported. For trucks using engines from other manufacturers like Cummins, you can try using the scanner. If unsure, provide vehicle details to customer service for assistance.

• Is it possible to support Special functions, such as DPF regen?

  No, it is a basic code reader.

• Which vehicle protocols are supported by the HD OBD menu? Which systems' data can be read? Can non-heavy truck vehicles be used? What should I do if I'm not sure whether the model is suitable or not?

  The HD OBD menu supports reading only the heavy truck protocol. If it meets the requirements, use this to test and you can obtain the data of the entire system: J1939, J1708, 27145. Supported reading systems: Full system. If you are not sure, please inform us of the vehicle model and engine. For non-heavy truck vehicles, the data reading is incomplete and it is not recommended to purchase.

• Which protocols of vehicles are supported by the WWH OBD menu? Can the data of the engine system be read through OBDII?

  The WWH OBD menu can support these protocol vehicles to read engine system data (using OBDII): CAN, KWP2000, ISO9141-2, 1850VPW, 1850PWM.

Figure 12: Common troubleshooting questions regarding fault codes and compatibility.

Figure 13: Common troubleshooting questions regarding supported protocols and vehicle types.

Specifications

• Brand: ANCEL
• Power Source: Battery Powered
• Screen Size: 2.8 Inches

Support

For the latest software updates, additional information, or any questions, please visit the official ANCEL website or contact customer service.

Official Product Videos