SANODESK Electric Standing Desk User Manual

1. Product Overview

The SANODESK Electric Standing Desk is designed to enhance your workspace with its ergonomic features and robust construction. Its single-piece desktop provides a seamless and spacious work surface, while the electric lifting system allows for effortless transitions between sitting and standing positions. The intuitive control panel with memory presets ensures personalized comfort and efficiency.

Key features include:

• 40" x 24" Whole-Piece Desktop: Offers ample space for monitors, laptops, and other office essentials.
• LED Memory Control Panel: Easily adjust height with buttons and save up to 4 preferred height settings.
• Electric Lifting System: Smoothly adjusts height from 28.9 inches to 46.5 inches.
• Sturdy Construction: Thickened steel pipe frame prevents wobbling and supports up to 176 lbs.
• Sleek Design: Black frame and black tabletop with a waterproof and rustproof coating for durability and easy cleaning.

2. Setup and Assembly

Assembly of your SANODESK Electric Standing Desk is straightforward. Please follow the steps outlined below and refer to the official installation video for visual guidance.

1. Adhesive Anti-Vibration Pads: Attach the anti-vibration pads to the designated areas on the frame components. Ensure to tear off the backing before installation.
2. Insert Transmission Rod into Motor: Carefully insert the longer end of the transmission rod into the motor. Pay attention to the motor's direction as shown in the video.
3. Install Motor and Right Lifting Column: Securely attach the motor assembly to the right lifting column using the provided screws and tools.
4. Install the Crossbeam: Align the three protrusions at the lifting column with the holes in the crossbeam and secure it.
5. Adjust the Column Height: If the height of the left and right table legs is inconsistent, adjust by turning the transmission rod with a wrench.
6. Install the Left Lifting Column: Ensure the crossbeam holes align with the left lifting column holes before securing.
7. Install the Support Plates: Attach the support plates to the frame, ensuring all screws are tightened.
8. Install the Desk Foot: Secure the desk feet to the bottom of the lifting columns.
9. Install the Desk Board: Carefully place the desk board onto the assembled frame and secure it using screws. A drill may be required for this step.
10. Install the Keypad: Attach the control keypad to the underside of the desk board in the desired location.
11. Install the Hook: Secure the headphone hook to the underside of the desk board.
12. Wiring: Connect all necessary cables from the motor, keypad, and power plug as per the wiring diagram.
13. Flip the Desk: With assistance, carefully flip the assembled desk upright.

3. Operating Instructions

Your SANODESK Electric Standing Desk is designed for easy and intuitive operation. The control panel allows for precise height adjustments and convenient memory presets.

The smart keypad for controlling desk height and memory presets.

• Manual Height Adjustment: Use the up (▲) and down (▼) arrow buttons to manually raise or lower the desk to your desired height. The current height will be displayed on the LED screen.
• Setting Memory Presets:
  1. Adjust the desk to your preferred sitting or standing height.
  2. Press the 'M' or 'i' button (memory function button). The display will show 'S-'.
  3. Immediately press one of the numbered preset buttons (1, 2, 3, or 4) to save the current height to that position. The display will confirm the save.
• Using Memory Presets: Simply press the corresponding numbered button (1, 2, 3, or 4) to automatically move the desk to your saved height.
• Height Range: The desk can be adjusted from a minimum height of 28.9 inches to a maximum height of 46.5 inches.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your SANODESK Electric Standing Desk.

• Cleaning: The desk's surface is waterproof and rustproof. Use a soft, damp cloth to wipe down the desktop and frame. Avoid abrasive cleaners or harsh chemicals.
• Check Connections: Periodically inspect all screws and connections to ensure they are tight. Re-tighten if necessary.
• Cable Management: Ensure cables are neatly managed and not pinched or tangled, especially during height adjustments.
• Motor Care: Avoid overloading the desk beyond its 176 lbs capacity. Allow the motor to rest if it has been used frequently for adjustments.

5. Troubleshooting

If you encounter any issues with your SANODESK Electric Standing Desk, refer to the following common troubleshooting tips:

• Desk Not Responding:
  • Check if the power cord is securely plugged into both the desk and the wall outlet.
  • Ensure there are no obstructions preventing the desk from moving freely.
• E01 Error Message: This message typically indicates that the motor has been used too frequently in a short period and needs to rest. Allow the desk to cool down for a few minutes (e.g., 10-20 minutes) before attempting further adjustments. The error should clear automatically.
• Wobbling:
  • Ensure all assembly screws are tightened securely, especially those connecting the legs to the desktop and crossbeam.
  • Verify that the desk is placed on a flat and stable surface.
• Inconsistent Leg Height: If one leg is higher than the other, refer to Step 5 in the Setup section to adjust the transmission rod with a wrench.

6. Specifications

7. Warranty and Support

SANODESK is committed to your satisfaction. Your product comes with a Limited Warranty.

• 30-Day Return/Exchange: If you encounter any problems when you receive or use the product, a 30-day return or exchange service is available.
• Customer Support: For any issues or assistance, please contact customer service through your order page. SANODESK is very much willing to offer assistance.