Product Overview
The Sanag M13S is an ultra-portable Bluetooth speaker designed for high-quality audio on the go. It features dynamic RGB lighting, robust waterproofing, and extended battery life, making it suitable for various environments.
Image: Sanag M13S Portable Bluetooth Speaker in black with orange accents.
What's in the Box
- RGB Portable Bluetooth Speaker
- Type-C Charging Cable
- Aux Cable
- User Manual
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided Type-C charging cable to the speaker's charging port and a suitable USB power source. The charging indicator light will illuminate red while charging and turn green when fully charged.
2. Powering On/Off
To power on the speaker, press and hold the power button (located in the middle of the control panel) for a few seconds until you hear an audible prompt and the RGB lights activate. To power off, press and hold the power button again.
3. Bluetooth Pairing
When powered on, the speaker will automatically enter Bluetooth pairing mode, indicated by a blinking blue light. On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Sanag M13S". Select it to connect. A successful connection will be confirmed by an audible prompt and a solid blue light.
4. TF Card Mode
Insert a TF (MicroSD) card with pre-loaded music into the designated slot. The speaker will automatically switch to TF card mode. Double-click the power button to switch between TF card mode and Bluetooth mode.
Operating Instructions
1. Volume Control
Press the '+' button to increase the volume. Press the '-' button to decrease the volume. An audible prompt will indicate maximum volume.
2. Music Playback
In Bluetooth mode, use the central power button to play or pause music. To skip to the next song, long press the '+' button for 2 seconds. To go to the previous song, long press the '-' button for 2 seconds.
Image: Diagram illustrating the internal components of the Sanag M13S speaker, highlighting its polymer diaphragm, acoustic cavity, voice enhance technology, and Bluetooth 5.1 connection for Hi-Fi sound, shocked bass, and 360° stereo sound.
3. RGB Light Modes
The speaker features ambient RGB lighting with multiple modes. Press the power button three times to switch between different light modes:
- Gradient Mode: The lights slowly fade between various colors, syncing with the music.
- Flowing Mode: The light display changes brightness according to the size of the music.
- No Indicator Mode: The light goes out and does not display.
Image: Five Sanag M13S speakers in different colors (red, blue, orange, green, purple) showcasing their RGB light effects, labeled as 'RGB Light Show: Breathing light & Pulsing light'.
4. Hands-Free Calling
The built-in noise-cancelling microphone allows for clear hands-free calls. Press the power button once to answer or end a call.
Image: A person in a car holding a Sanag M13S speaker, with text 'Clear Call: Enjoy crystal clear calls from your speaker with noise-cancelling microphone'.
Maintenance
1. Waterproofing
The Sanag M13S speaker is IPX7 waterproof, meaning it can be submerged in up to 1 meter of water for 30 minutes. Ensure the charging port and TF card slot cover is securely closed before exposing the speaker to water.
Image: A red Sanag M13S speaker partially submerged in clear blue water, with text 'IPX7 TRUE WATERPROOF: A speaker that can breathe underwater'.
2. General Care
Clean the speaker with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials. Store in a cool, dry place when not in use.
Troubleshooting
- No Power: Ensure the speaker is fully charged.
- Cannot Pair: Make sure the speaker is in pairing mode (blinking blue light) and within range of your device. Disconnect from other Bluetooth devices if necessary.
- No Sound: Check the volume levels on both the speaker and your connected device. Ensure the speaker is correctly paired.
- Muffled Sound after Water Exposure: Allow the speaker to dry completely. The sound quality should return to normal once dry.
Specifications
| Feature | Specification |
|---|---|
| Brand | Sanag |
| Model Name | Sanag M13S |
| Model Number | JP-M13S |
| Connectivity Technology | Bluetooth 5.3 |
| Speaker Maximum Output Power | 10 Watts |
| Audio Output Mode | Stereo |
| Speaker Type | Subwoofer |
| Water Resistance Level | IPX7 Waterproof |
| Playtime | Up to 18 Hours |
| Item Weight | 7.68 ounces |
| Item Dimensions (D x W x H) | 3.8"D x 3.03"W x 1.6"H |
| Power Source | Battery Powered (1 Lithium Polymer battery included) |
| Additional Features | Portable, Built-in Microphone, RGB Lighting |
Official Product Video
Video: An official product video showcasing the Sanag portable Bluetooth speaker with its RGB light features in various usage scenarios.
Warranty & Support
Sanag is committed to your satisfaction. We provide a 30-day no-reason return policy and a 180-day warranty for this product. If you encounter any problems, please contact us promptly.
Contact Options:
- [Account Service] - [Order History] - [Seller Contact]
- Click our business name "NIEWEILI-US" and then click the yellow "Questions" button to send us an email.
