1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Banda Audioparts Dynamic Power 2000.4 amplifier. To ensure optimal performance and longevity of your device, please read all instructions carefully before use. The Dynamic Power 2000.4 amplifier incorporates advanced technology and high-quality materials to deliver superior audio performance.
2. Safety Instructions
Observe the following safety guidelines to prevent injury or damage to the amplifier and connected components:
- Always disconnect the vehicle's battery before making any electrical connections.
- Ensure proper grounding to prevent electrical hazards.
- Do not expose the amplifier to moisture or extreme temperatures.
- Install the amplifier in a well-ventilated area to prevent overheating.
- Use appropriate gauge wiring for power and speaker connections as specified in installation guides.
- Seek professional assistance if you are unsure about any installation steps.
3. Product Overview
The Banda Audioparts Dynamic Power 2000.4 is a 4-channel audio amplifier featuring an internal Digital Signal Processor (DSP) and Bluetooth connectivity for configuration. It operates within a 9-15V input voltage range and is designed for high-fidelity sound reproduction.
Image 1: Front view of the Banda Audioparts Dynamic Power 2000.4 amplifier, showcasing its robust design and central branding.
Image 2: Rear view of the amplifier, displaying the RCA input jacks and speaker output terminals.
Image 3: Side view of the amplifier, highlighting the cooling fans for thermal management.
4. Setup
4.1 Bluetooth Connection for DSP Setup
The internal DSP of the Dynamic Power 2000.4 amplifier can be configured via a dedicated smartphone or tablet application. Follow these steps to establish a Bluetooth connection:
- Download the "DYNAMIC Power" app from the Google Play Store (for Android devices) or the Apple App Store (for iOS devices).
- Activate the device location services on your smartphone or tablet.
- Enable Bluetooth connectivity on your smartphone or tablet.
- Open the "DYNAMIC Power" app. The app will automatically detect and display the amplifier.
- Select the detected amplifier within the app to establish the connection and begin configuration.
4.2 Wiring Configurations
The amplifier supports various speaker configurations across its four channels:
- Channels 1 and 2: Each channel can power two 250 Wrms @ 4 ohms loudspeakers connected in parallel, resulting in 500 Wrms @ 2 ohms per channel.
- Bridge Channels 1 and 2: Can power a 4-ohm single coil 1000 Wrms subwoofer or woofer, resulting in 1000 Wrms @ 4 ohms for the bridged output.
- Bridge Channels 3 and 4: Can power a 4-ohm single coil 1000 Wrms subwoofer or woofer, resulting in 1000 Wrms @ 4 ohms for the bridged output.
Ensure all wiring is correctly connected and secured to prevent short circuits or damage.
5. Operating Instructions
Once connected via Bluetooth, the DYNAMIC Power app provides an intuitive interface for adjusting all internal DSP settings. This allows for real-time system alignment and optimization directly from your smartphone or tablet.
- Use the app to adjust equalization, crossover points, time alignment, and other audio parameters.
- Save custom profiles for different listening preferences or vehicle setups.
- Refer to the in-app help or the manufacturer's website for detailed guidance on DSP functions.
6. Maintenance
To maintain the performance and appearance of your amplifier:
- Keep the amplifier clean by wiping it with a soft, dry cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure that the cooling fins and fans remain free of dust and debris to maintain proper airflow.
- Periodically check all wiring connections for tightness and corrosion.
7. Troubleshooting
If you encounter issues with your amplifier, consider the following common troubleshooting steps:
- No Power: Check the main power fuse, ground connection, and remote turn-on wire. Ensure the vehicle battery has sufficient charge.
- No Sound: Verify all RCA input cables are securely connected to the source unit and amplifier. Check speaker wiring for proper polarity and secure connections. Ensure the amplifier is not in protection mode.
- Distorted Sound: Reduce the gain settings on the amplifier. Check for proper impedance matching with speakers. Inspect speaker cones for damage.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on both devices and the app is updated. Try restarting both the amplifier (by cycling power) and your smart device.
If problems persist after attempting these steps, contact customer support.
8. Specifications
Key technical specifications for the Banda Audioparts Dynamic Power 2000.4 amplifier:
| Feature | Specification |
|---|---|
| Model Number | DYN2000.4BLACK |
| Product Dimensions (L x W x H) | 2.5 x 9.25 x 8.9 inches |
| Weight | 7.27 Pounds (3.3 Kg) |
| Input Voltage Range | 9-15 Volts |
| Maximum Supply Voltage | 15 Volts |
| Mounting Type | Surface Mount |
| Channels | 4 |
| Signal-to-Noise Ratio | 80dB |
Image 4: Diagram illustrating the dimensions of the Dynamic Power 2000.4 amplifier, including height, width, and depth, along with its weight.
9. Warranty Information
The manufacturer's warranty covers workmanship defects. Any claim under warranty requires confirmation via a Technical Service report. This warranty does not cover damage resulting from improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
10. Support
For further assistance, technical support, or warranty inquiries, please contact Banda Audioparts customer service. Refer to the product packaging or the official Banda Audioparts website for contact details.
