weelye DR01 V2.6-HL
weelye 2.4G Bluetooth Remote Control DR01 V2.6-HL 12V Receiver Kit User Manual
Model: DR01 V2.6-HL | Brand: weelye
Product Overview
This image displays the weelye 2.4G Bluetooth Remote Control and the DR01 V2.6-HL 12V Control Box. The remote control is black with directional buttons, a 'Z' button, and other function buttons. The control box is also black, showing its internal circuitry and connection points, labeled 'DR01 VERSION:V2.6-HL +12V'.
- 2.4G Bluetooth Remote Control and DR01 V2.6-HL 12V Control Box Kit. Products have slow start function, no additional installation of slow starter.
- 2.4G Bluetooth Remote Control, DR01 V2.6-HL 12V = DR01 V2.6 12V 7P socket 12V Control Box.
- Product is Applied to Specific Children Riding Toys, Please Make Sure the Purchased Part Has Same Appearance as the Original One.
- Batteries are not included inside.
- Please Simultaneously Hold down 'Z' keys for 3 seconds (3-5 seconds) to sync with your car (Batteries are not included inside).
Important Safety Information
WARNING! Not for children under 3 years. Small parts. Choking hazard.
- Load two AAA (1.5V) batteries according to the diagram.
- Non-rechargeable batteries are not to be recharged.
- Different types of batteries or new and used batteries are not to be mixed.
- Batteries are to be inserted with the correct polarity.
- Exhausted batteries are to be removed from the toy.
- The supply terminals are not to be short-circuited.
- The packaging must be retained since it contains important information.
Setup and Installation
Battery Installation (Remote Control)
The remote control requires two AAA (1.5V) batteries. Ensure correct polarity when inserting them into the battery compartment.
Control Box Installation
This kit is designed for specific children's riding toys. Before installation, verify that the purchased part (DR01 V2.6-HL 12V Control Box) has the same appearance and connector type as the original part you are replacing.
This image provides a detailed view of the DR01 V2.6-HL 12V Control Box, highlighting its version label 'DR01 VERSION:V2.6-HL +12V' and various connection ports. Ensure these match your original unit for proper compatibility.
Connect the control box to the toy's wiring harness. Ensure all connections are secure and match the original configuration. The control box features a 7P socket for connection.
This image illustrates the visual similarity between two versions of the DR01 12V control box, indicating that the DR01 V2.6-HL is compatible with the DR01 V2.6. This visual guide helps confirm that the replacement part matches the original unit.
Operating Instructions
Pairing the Remote Control
To sync the 2.4G Bluetooth Remote Control with your ride-on car's control box, simultaneously hold down the 'Z' button on the remote control for 3 to 5 seconds. The indicator light on the remote control or car may flash to confirm successful pairing.
This image shows the weelye 2.4G Bluetooth Remote Control, featuring directional arrows, a 'Z' button for pairing, and other control buttons. Familiarize yourself with these buttons for proper operation.
Basic Control Functions
- Directional Buttons: Use the arrow buttons to control the forward, backward, left, and right movement of the ride-on car.
- 'Z' Button: Primarily used for pairing the remote control with the car.
- Other Buttons: Refer to your specific ride-on car's manual for functions of other buttons on the remote, as they may vary.
The control box includes a slow start function, which provides a smoother acceleration for the ride-on car without needing additional components.
Maintenance
Battery Care
- Replace exhausted batteries promptly. Do not mix old and new batteries or different types of batteries.
- Ensure batteries are inserted with correct polarity.
- Remove batteries from the remote control if the product will not be used for an extended period.
- Non-rechargeable batteries must not be recharged.
Cleaning
- Wipe the remote control and control box with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- Keep the components dry and away from moisture.
Storage
- Store the kit in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not responding | Batteries are low or incorrectly installed. | Replace batteries, ensuring correct polarity. |
| Remote control not paired | Pairing process not completed or failed. | Hold down the 'Z' button for 3-5 seconds to re-pair the remote with the control box. |
| Car not moving or erratic movement | Control box connection issues. | Check all wiring connections to the control box for security and correct placement. Ensure the control box matches the original part. |
| No power to the car | Short circuit or power supply issue. | Ensure supply terminals are not short-circuited. Check the car's main power source. |
If issues persist after following these steps, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model | DR01 V2.6-HL |
| Voltage | 12V |
| Control Type | 2.4G Bluetooth Remote Control |
| Control Box Type | DR01 V2.6-HL 12V 7P socket Control Box |
| Remote Control Batteries | 2 x AAA (1.5V) (not included) |
| Product Dimensions | 5.5 x 3.3 x 2.8 inches (Control Box) |
| Item Weight | 4.2 ounces (Control Box) |
| Country of Origin | China |
| Manufacturer | weelye |
Warranty and Support
Warranty Information
Specific warranty details for this product are typically provided at the point of purchase or within the original product packaging. Please retain your purchase receipt for warranty claims.
Customer Support
For technical assistance or inquiries regarding replacement parts, please contact weelye customer support. Refer to the contact information provided with your original product or visit the official weelye store on Amazon: weelye Store.