BaBylissPRO Premium Trimmer Guards Instruction Manual

1. Product Overview

The BaBylissPRO Premium Trimmer Guards (Model FXPTG) are designed to provide precise and consistent cutting lengths for your professional trimmers. This set includes four different size comb attachments: 0.5 (1/16"), 1 (1/8"), 1.5 (3/16"), and 2 (1/4").

Each guard is constructed from fiberglass-reinforced nylon, ensuring exceptional strength and durability for long-lasting performance. A robust gold metal clip firmly secures the guard to the trimmer blade, preventing movement during use. These guards are engineered to prevent rubbing, even when the trimmer blade is zero-gapped.

Image 1.1: Front view of the BaBylissPRO Premium Trimmer Guards packaging, displaying the four comb attachments.

Image 1.2: Close-up view of the four premium trimmer guards, highlighting their design and sizes.

2. Compatibility

These premium trimmer guards are specifically designed for use with BaBylissPRO professional trimmers. They are compatible with the following models:

• BaBylissPRO FX797
• BaBylissPRO FX787
• BaBylissPRO FX726

The guards are also compatible with most other 2-hole trimmer blades.

Image 2.1: The premium trimmer guards displayed alongside compatible BaBylissPRO trimmer models FX787, FX726, and FX797.

3. Setup and Attachment

To attach a trimmer guard to your BaBylissPRO trimmer:

1. Ensure your trimmer is turned off and unplugged for safety.
2. Select the desired comb attachment size (0.5, 1, 1.5, or 2).
3. Align the metal clip of the guard with the trimmer blade.
4. Gently push the guard onto the blade until the metal clip securely snaps into place. Ensure the guard is firmly seated and does not wobble.
5. To remove, gently pull the guard away from the blade while holding the trimmer steady.

4. Operating Instructions

Once the desired guard is securely attached, you can begin trimming. Always start with a longer guard if you are unsure of the desired length. Move the trimmer against the direction of hair growth for an even cut. For detailed trimming techniques, refer to your specific BaBylissPRO trimmer's instruction manual.

5. Maintenance

Proper maintenance ensures the longevity and performance of your trimmer guards:

• Cleaning: After each use, remove the guard from the trimmer. Use a small brush (often included with trimmers) to remove any trapped hair from the guard and the trimmer blade. You may rinse the guards under cool running water. Ensure they are completely dry before storing or reattaching.
• Storage: Store the guards in a clean, dry place, preferably in their original packaging or a dedicated storage case, to prevent damage and loss.
• Inspection: Periodically inspect the guards for any signs of wear, cracks, or damage to the fiberglass-reinforced nylon or the metal clip. Replace any damaged guards to ensure optimal performance and prevent potential injury.

6. Troubleshooting

If you encounter issues with your trimmer guards, consider the following:

• Guard not staying on: Ensure the metal clip is properly aligned and fully snapped onto the trimmer blade. Check for any debris obstructing the clip mechanism. If the clip appears damaged or loose, the guard may need replacement.
• Uneven cut: Verify that the guard is fully seated and not loose. Ensure the trimmer blade itself is clean and properly aligned.

7. Specifications

Image 7.1: Back view of the product packaging, showing manufacturing details and UPC.

8. Warranty and Support

For warranty information or technical support regarding your BaBylissPRO Premium Trimmer Guards, please contact BaBylissPRO customer service directly. Refer to the contact information provided with your original trimmer purchase or visit the official BaBylissPRO website for assistance.

Manufacturer: BaBylissPRO