Introduction
Thank you for choosing the Merax Modern Wood Buffet Cabinet. This manual provides detailed instructions for the assembly, operation, and maintenance of your new furniture. Please read through this guide completely before beginning assembly or use to ensure safe and correct setup and to maximize the lifespan of your product.
Important Safety Information
WARNING: Failure to follow these safety instructions could result in injury or damage to the product.
- Do not overload the tabletop, drawers, or bottom shelf beyond their specified weight capacities.
- Always follow the assembly instructions carefully to avoid injury.
- Avoid using harsh chemicals and household cleaners during cleaning as they may damage the finish.
- Periodically check that all connections are tight, as hardware may loosen over time.
- Ensure the cabinet is placed on a stable, level surface to prevent tipping.
Components List
Before assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Main Console Table Unit
- 4 x Drawers
- 2 x Cabinet Doors
- 1 x Bottom Shelf
- 4 x Legs
- 1 x Hardware Pack (screws, bolts, tools)
Assembly Instructions
The Merax Modern Wood Buffet Cabinet requires partial assembly. All necessary instructions, hardware, and tools are included in the package. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify against the Components List.
- Attach Legs: Securely attach the four legs to the main console table unit using the provided hardware. Ensure they are tightened firmly.
- Install Bottom Shelf: Position the bottom shelf between the attached legs and secure it using the designated hardware.
- Insert Drawers: Slide the four drawers into their respective slots in the main unit.
- Adjust Cabinet Doors: Ensure cabinet doors open and close smoothly. Adjust hinges if necessary.
Figure 1: Illustration of the cabinet's simple assembly process.
Figure 2: Product dimensions for planning placement.
Operating Instructions
Your Merax Modern Wood Buffet Cabinet is designed for versatile storage and display.
- Using Drawers: The four pull-out drawers are ideal for storing smaller items such as silverware, placemats, coasters, or other dining and living room accessories. Pull gently to open and push firmly to close.
- Using Cabinets: The two enclosed cabinets provide larger storage space for items like dishes, china, or other household goods. Open by pulling the knob and close by pushing the door until it latches.
- Using Shelves: The top surface and the bottom shelf can be used for displaying decorative items, books, or for easy access storage. Ensure items placed on shelves do not exceed the weight capacity.
Figure 3: Demonstrating the storage capacity of the cabinet.
Maintenance
Proper care will help maintain the appearance and longevity of your buffet cabinet.
- Cleaning: Wipe the surface with a soft, dry cloth. For tougher spots, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners, harsh chemicals, or polishes that may damage the distressed finish.
- Hardware Check: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain structural integrity.
- Avoid Direct Sunlight/Heat: Prolonged exposure to direct sunlight or heat sources can cause fading or warping.
- Spill Management: Immediately wipe up any spills to prevent staining or damage to the wood finish.
Troubleshooting
If you encounter any issues with your Merax Modern Wood Buffet Cabinet, please refer to the following common solutions:
- Wobbly Cabinet: Ensure all legs are securely attached and all connecting hardware is tightened. Verify the cabinet is on a level surface.
- Drawers Sticking: Check for any obstructions in the drawer slides. Ensure drawers are inserted correctly and not overloaded.
- Cabinet Doors Not Closing Properly: Inspect hinges for damage or misalignment. Adjust hinges if needed, or ensure nothing is obstructing the door's path.
- Surface Scratches: Minor scratches can sometimes be touched up with a furniture repair pen matching the distressed finish. For significant damage, contact customer support.
If problems persist, please contact Merax customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Merax |
| Model Number | HH566 |
| Product Dimensions | 15"D x 46"W x 34"H |
| Item Weight | 56 Pounds |
| Material | Engineered Wood (Frame, Back, Top) |
| Finish Type | Distressed |
| Color | White |
| Weight Limit (Tabletop) | 100 LBS |
| Weight Limit (Bottom Shelf) | 40 LBS |
| Weight Limit (Drawer) | 18 LBS |
| Included Components | 1 Shelf, 2 Cabinets, 4 Drawers, Console Table |
| Assembly Required | Yes (Partial) |
| Mounting Type | Floor Mount |
| Room Type | Bedroom, Dining Room, Hallway, Kitchen, Living Room |
| UPC | 195358511756 |
Warranty and Support
For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Merax website. If you have any questions regarding assembly, parts, or operation, do not hesitate to contact our customer service team.
Contact Information: Please refer to your purchase receipt or the Merax official website for the most current contact details.
