Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your GUARDER G10pro+ Fingerprint Keyless Entry Front Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Product Overview
Key Features
- One-Touch Fingerprint Access: Secure unlocking using fingerprint recognition, suitable for all ages.
- 300 User Codes: Supports up to 300 unique access codes for various users.
- Durable and Power Saving: Constructed from zinc alloy and aluminum alloy, tested for 100,000 unlocking cycles. Designed for energy efficiency.
- Multiple Functions: Includes Code Protect (anti-peeping), Silent Mode (mute operation), and Visitor Mode (temporary unlock).
- Smart Custom Unlocking & Waterproof: Customizable auto-lock time (5-69 seconds) and IP56 dustproof and waterproof design for North American weather conditions.
- Easy Installation: Designed for simple installation on US standard left and right doors with a screwdriver.
Package Contents
The package includes the smart deadbolt unit (keypad and interior assembly), strike plate, gaskets, mounting hardware, and two manual keys.
Image: All components included in the Guarder G10pro+ smart deadbolt package, laid out on a white surface. This includes the exterior keypad with fingerprint sensor, the interior battery unit, the latch mechanism, strike plate, mounting screws, and two physical keys.
Setup and Installation
Before installation, ensure your door meets the following specifications: door thickness 1-3/8" to 2-1/2", latch length 2-3/8" (60mm) or 2-3/4" (70mm), and a 2.13-inch bore hole.
Image: A diagram illustrating the required door dimensions for installation, including the adjustable latch length (60mm or 70mm) and the 2.13-inch bore hole diameter. It also shows the interior and exterior lock components.
Installation Steps
- Prepare the Door: Ensure the door is properly drilled according to the provided template.
- Install the Latch: Retract the lock tongue into a back state and insert the latch into the door edge. Secure it with screws.
- Install the Exterior Assembly: Ensure the lock cylinder is horizontal. Pass the wires and spindle through the bore hole.
- Install the Mounting Plate: Secure the mounting plate to the interior side of the door, aligning it with the exterior assembly.
- Connect Wires: Connect the wire from the exterior assembly to the interior assembly.
- Adjust Rear Lock Knob: For a right door, keep the rear lock knob horizontal. For a left door, keep it vertical.
- Install the Interior Assembly: Attach the interior assembly to the mounting plate, ensuring the spindle engages correctly. Secure with screws.
- Insert Batteries: Open the battery cover and insert four AAA alkaline batteries (not included).
- Test Functionality: Test the lock with the default code and manual key.
Video: An official installation guide for the Guarder G10PRO Smart Deadbolt, demonstrating step-by-step how to install the lock on a door, including preparing the door, installing the latch, exterior and interior assemblies, connecting wires, and inserting batteries.
Operating Instructions
Default Settings
- Default Master Code: 123456
- Auto-lock: Enabled (customizable 5-69 seconds)
Unlocking Methods
Fingerprint Unlocking
Place a registered finger on the fingerprint sensor. The lock will unlock if the fingerprint is recognized.
Keypad Code Unlocking
Enter your 4-10 digit user code followed by the '#' key.
Manual Key Unlocking
Use the provided physical key to unlock the deadbolt in case of battery failure or emergency.
Image: The exterior keypad of the Guarder G10pro+ smart deadbolt with a physical key inserted into the keyhole, illustrating the manual unlocking method.
Locking Methods
Auto-Lock
The lock will automatically engage after the set delay (default or customized).
One-Touch Locking
Press and hold the '#' key for 3 seconds to manually lock the door.
Special Functions
Code Protect (Anti-Peeping)
Enter random digits before or after your actual code to prevent others from guessing your passcode. Example: [Random Digits] + [Your Code] + [Random Digits] + #.
Silent Mode
To enable/disable silent mode, refer to the programming instructions to mute the lock's sound.
Visitor Mode
When activated, the lock remains unlocked, allowing free entry and exit. This mode can be set via programming.
Private Mode
When Private Mode is turned on, all regular user passwords will be temporarily invalid. Only the master code or physical key can unlock the door.
Image: A visual representation of the multi-functional features of the Guarder G10pro+ smart deadbolt, such as 300 user capacity, auto-lock, IP56 waterproof rating, code protection, silent mode, private mode, and visitor mode.
Maintenance
Battery Replacement
The lock requires four AAA alkaline batteries. When the battery level is low, the lock will indicate with a warning. Replace all four batteries simultaneously.
Emergency Power Supply
In case of complete battery depletion, connect a power bank to the emergency Type-C port on the exterior unit to temporarily power the lock for entry.
Image: The Guarder G10pro+ smart deadbolt connected to a power bank via a Type-C cable, demonstrating how to provide emergency power to the lock if its internal batteries are depleted.
General Care
Clean the lock surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure the fingerprint sensor and keypad are free from dirt and debris.
Troubleshooting
Resetting the Lock
To perform a factory reset, locate the reset button on the interior assembly. Press and hold it for 5 seconds until you hear a confirmation. This will erase all user codes and fingerprints, restoring default settings.
Common Issues
- Lock not responding: Check battery levels and replace if necessary. Use the emergency power supply or manual key.
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint.
- Keypad not responding: Check for battery issues. Ensure no debris is obstructing the buttons.
- Auto-lock not working: Verify the auto-lock setting is enabled and the delay time is configured correctly.
Specifications
| Feature | Detail |
|---|---|
| Brand | GUARDER |
| Model Number | G10pro+ |
| Lock Type | Keypad, Fingerprint |
| Material | Zinc Alloy, Aluminum Alloy |
| Special Features | Fingerprint, Waterproof (IP56) |
| User Capacity | 300 User Codes |
| Power Source | 4x AAA Batteries (not included) |
| Emergency Power | Type-C USB Port |
| Door Thickness | 1-3/8" to 2-1/2" |
| Latch Length | 2-3/8" (60mm) or 2-3/4" (70mm) |
| Item Dimensions (L x W x H) | 10 x 2 x 2 inches |
Image: A graphic highlighting the IP56 weather resistance of the Guarder G10pro+ smart deadbolt, showing its operational temperature range from -22°F to 176°F and its ability to withstand frost, heat, and rain.
Warranty and Support
GUARDER offers a 30-day money-back guarantee, free replacement within 1 year, and lifetime after-sales customer service from the date of purchase.
For support, contact GUARDER customer service:
- Online phone calls: Monday to Sunday, 9 am to 6 pm PDT.
- Online after-sales email service: 24/7.
For more information, visit the official GUARDER store: GUARDER Store.