1. Introduction
This manual provides essential instructions for the proper installation, use, and maintenance of the Thule Yepp Nexxt Maxi Safety Strap. Please read this manual thoroughly before using the product to ensure safety and optimal performance. This safety strap is designed as an accessory for the Thule Yepp Nexxt Maxi child bicycle seat, providing additional security for the child.
2. Safety Information
WARNING:
- Always ensure the safety strap is correctly installed and securely fastened before each use.
- Regularly inspect the strap for any signs of wear, damage, or fraying. Discontinue use immediately if damage is found.
- This safety strap is an accessory for the Thule Yepp Nexxt Maxi child seat and should only be used as intended with that product.
- Do not modify the safety strap in any way. Unauthorized modifications can compromise safety.
- Keep out of reach of children when not in use to prevent entanglement hazards.
Failure to follow these safety instructions could result in serious injury or death.
3. Package Contents
Verify that all components are present in the package:
- Thule Yepp Nexxt Maxi Safety Strap
- Brackets (for attachment)
- Instruction Manual (this document)

Image 1: Components of the Thule Yepp Nexxt Maxi Safety Strap package, including the strap and brackets.
4. Setup and Installation
The Thule Yepp Nexxt Maxi Safety Strap is designed for straightforward installation onto the compatible child bicycle seat. Follow these general steps:
- Identify Attachment Points: Locate the designated attachment points on your Thule Yepp Nexxt Maxi child seat for the safety strap. These are typically slots or loops designed to secure the strap.
- Attach Brackets: Secure the provided brackets to the safety strap according to the markings or design. Ensure they are firmly attached and oriented correctly.
- Thread the Strap: Carefully thread the safety strap through the attachment points on the child seat. Ensure the strap is not twisted.
- Secure the Strap: Fasten the strap ends using the integrated buckles or fasteners. Pull the strap taut to remove any slack, but do not overtighten. The strap should provide a snug fit without restricting the child's movement excessively.
- Final Check: Before placing a child in the seat, perform a final check to ensure the strap is securely attached, properly routed, and free from any obstructions.
Refer to the specific instructions provided with your Thule Yepp Nexxt Maxi child seat for detailed diagrams and precise attachment methods.
5. Operating Instructions
Once installed, the safety strap enhances the security of a child in the Thule Yepp Nexxt Maxi child seat. To operate:
- Placement: Position the child comfortably in the child seat.
- Fasten: Bring the safety strap across the child's chest or shoulders, depending on the design, and connect the buckles.
- Adjust: Adjust the strap length to achieve a snug and secure fit. The strap should be tight enough to prevent the child from easily slipping out, but not so tight as to cause discomfort or restrict breathing.
- Verify: Always double-check that the strap is properly fastened and adjusted before beginning your ride.
6. Maintenance
Proper maintenance ensures the longevity and continued safety of your Thule Yepp Nexxt Maxi Safety Strap:
- Cleaning: Clean the strap with a mild soap and water solution. Do not use harsh chemicals or abrasive cleaners, as these can damage the material. Allow to air dry completely.
- Inspection: Regularly inspect the entire strap, buckles, and attachment points for any signs of wear, cuts, tears, fraying, or deformation. Pay close attention to stitching.
- Storage: When not in use for extended periods, store the safety strap in a clean, dry place away from direct sunlight and extreme temperatures.
- Replacement: If any damage is observed, or if the strap shows significant signs of wear, replace it immediately with an original Thule replacement part.
7. Troubleshooting
This section addresses common issues you might encounter with the safety strap.
- Strap feels loose after adjustment:
- Ensure the strap is threaded correctly through all adjustment mechanisms.
- Verify that the buckles are fully engaged and not partially open.
- Check for any foreign objects preventing the strap from tightening properly.
- Difficulty fastening buckles:
- Inspect buckles for dirt, debris, or damage. Clean if necessary.
- Ensure the buckle components are aligned correctly before attempting to fasten.
- Visible wear or damage on the strap:
- Discontinue use immediately.
- Order a genuine Thule replacement safety strap.
If you encounter issues not covered here, please contact Thule customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Thule |
| Model Name | Yepp Nexxt Maxi Safety Strap |
| Part Number | 1500052956 |
| Color | Multi-Coloured |
| Material | Unisex Adults Composite |
| Item Weight | 0.2 Kilograms |
| Package Weight | 0.06 Kilograms |
| Item Package Dimensions (L x W x H) | 9.88 x 8.5 x 1.5 inches |
| Suggested Users | Sport |
| Manufacturer | THULE |
| Model Year | 2022 |
9. Warranty and Support
Thule products are known for quality and are tested to meet global safety standards. For specific warranty information regarding your Thule Yepp Nexxt Maxi Safety Strap, please refer to the warranty documentation included with your original Thule Yepp Nexxt Maxi child seat or visit the official Thule website.
For technical support, replacement parts, or further assistance, please contact Thule customer service through their official website: www.thule.com





