1. Introduction
The Vibeat Rechargeable Bluetooth Fingertip Pulse Oximeter (Model S6W) is a compact and portable device designed to measure blood oxygen saturation (SpO2), pulse rate (PR), and perfusion index (PI) from your fingertip. It utilizes research-grade photoplethysmograph technology for high-precision readings. This device is intended for sports and aviation use only and is not a medical device. It is not intended for medical use, diagnosis, treatment, cure, or prevention of any disease or health condition.
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
2. Package Contents
- Vibeat Fingertip Pulse Oximeter (S6W)
- USB Type-C Charging Cable
- Lanyard
- User Manual
Image: The Vibeat Pulse Oximeter box, showing the device, charging cable, and lanyard.
3. Device Overview
The Vibeat S6W features a two-color highlight OLED screen for clear readings. It has a single button for operation and navigation through settings. The device is designed for ease of use, automatically turning on when a finger is inserted and off when removed.
Image: The Vibeat Pulse Oximeter shown alongside a smartphone displaying the Vihealth app interface.
Image: A close-up of the oximeter's screen showing blood oxygen (SpO2), pulse rate (PR), and pulse index (PI) readings.
4. Setup
4.1 Charging the Battery
The device is equipped with a rechargeable lithium battery. A full charge provides approximately 24 hours of continuous use. Use the provided USB Type-C cable to charge the device. The charging port is located on the side of the oximeter.
Image: The Vibeat Pulse Oximeter connected to a USB Type-C charging cable.
4.2 App Download
To enhance your monitoring experience, download the "Vihealth" app on your smartphone. The app allows you to view real-time data, track trends, and export reports.
- Scan the QR code in the user manual or visit the app store.
- Alternatively, download the app from this link: http://app.appurl.me/79816540314
Image: Multiple smartphones showing the Vihealth app interface with oxygen level and pulse rate graphs.
5. Operating Instructions
5.1 Taking a Measurement
- Ensure your finger is clean and free of nail polish or foreign matter.
- Open the oximeter clamp and insert one finger (preferably the index finger) fully into the rubber opening.
- Release the clamp. The device will automatically power on and begin measuring.
- Remain still during measurement. Avoid moving your hand or finger.
- Read the SpO2, PR, and PI values displayed on the screen.
- Remove your finger from the oximeter. The device will automatically power off after a few seconds.
5.2 Measurement Modes
The device supports two measurement modes: Spot Check Mode and Continuous Mode.
- Spot Check Mode: After 30 seconds of stable measurement, the pulse rhythm result will be displayed. This mode provides results and then stops measuring.
- Continuous Mode: For extended monitoring, switch to this mode via the device's settings menu.
Image: The oximeter displaying both Continuous and Spot Check measurement modes.
5.3 On-Device Data Storage
The oximeter can store up to 12 groups of measurement records directly on the device. You can review these past readings by navigating the device menu.
Image: The oximeter displaying stored data, indicating up to 12 memory slots for readings.
6. App Integration and Features
Connect your Vibeat S6W to the "Vihealth" app via Bluetooth for advanced monitoring and data management.
- Real-time Tracking: Observe your SpO2, PR, and PI trends in real time on your phone.
- Unlimited Data Storage: The app provides unlimited storage for your measurement data.
- Exportable Reports: Download and share your results in PDF and CSV formats.
- Waveform History: View detailed waveform graphs of your pulse.
Video: An official Vibeat video demonstrating the rechargeable Bluetooth pulse oximeter and its connection to the Vihealth app for data display.
7. Settings Menu
To access the settings menu, long-press the main button on the device. A quick press will navigate through options, and a long-press will select or adjust them.
- Alarm Setup: Set custom high/low thresholds for SpO2 and PR. If readings fall outside these thresholds, the device will alert you with a buzzer and flashing display.
- Sound: Turn the buzzer sound on or off.
- Brightness: Adjust the screen brightness level (1-5).
- Display Time: Set the duration the screen remains active (e.g., 1 min, 3 min, 5 min, always).
- Mode: Switch between Spot Check and Continuous measurement modes.
- Data Review: Browse stored measurement records.
- Data Delete: Clear stored data.
- Defaults: Restore factory settings.
Image: The oximeter's screen showing various adjustable settings like SpO2 and PR thresholds, mode selection, and display time.
8. Maintenance and Care
- Cleaning: Clean the device surface with a soft cloth dampened with medical alcohol. Do not immerse the device in water or other cleaning solutions.
- Storage: Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity.
- Battery: If the device will not be used for an extended period, ensure it is fully charged before storage.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display after power on | Low battery or no power | Charge the device. |
| Inaccurate readings | Finger not properly inserted, excessive movement, cold fingers, nail polish. | Reinsert finger, remain still, warm hands, remove nail polish. |
| Device turns off automatically | Automatic power-off feature, low battery. | This is normal. Charge the device if battery is low. |
| Bluetooth connection issues | Bluetooth not enabled on phone, device not in pairing mode. | Ensure Bluetooth is on, restart device and app, try pairing again. |
Video: A seller-provided video demonstrating the accuracy and durability of a pulse oximeter, including user guide information.
10. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 1.38 x 1.63 x 2.48 inches |
| Weight | 2.89 ounces |
| Batteries | 1 Lithium Polymer battery (included) |
| Measurement Accuracy | Within 2% |
| Measuring Range | 0%-100% |
| Connectivity | Bluetooth |
| Manufacturer | Viatomtech |
| Color | White+Gray |
11. Important Safety Information
- This device is for Sports and Aviation use only and not intended for medical use.
- Do not use the oximeter in an MRI or CT environment.
- Do not use the oximeter in situations requiring alarm devices.
- Do not use the oximeter on the same finger for more than 5 minutes.
- Do not use the oximeter on infants or children.
- Nail polish or artificial nails may cause inaccurate readings.
- Keep the oximeter away from dust, vibration, corrosive substances, explosive materials, and high temperatures.
- If the oximeter gets wet, please stop using it.
- Do not operate the buttons on the front panel with sharp objects.
- Please keep the cable away from children.
12. Warranty and Support
The Vibeat Pulse Oximeter typically comes with a 1-Year Warranty. Please refer to your product packaging or purchase documentation for specific warranty details.
For technical support or inquiries, please contact Vibeat support at: support@vibeatstore.com