Product Overview
The memzuoix Ergonomic Wireless Mouse is designed to provide a comfortable and natural hand position, reducing wrist and arm strain during extended computer use. This 2.4G optical cordless mouse features adjustable DPI settings and multiple buttons for improved productivity.

Figure 1: memzuoix Ergonomic Wireless Mouse (Red model shown)
Key Features:
- Ergonomic Design: Promotes a natural "handshake" wrist and arm position to minimize strain.
- 2.4G Wireless Connectivity: Provides a stable and reliable connection via a USB receiver.
- Adjustable DPI: Three sensitivity levels (800/1200/1600 DPI) for precise tracking.
- 6-Button Functionality: Includes left/right click, scroll wheel, DPI switch, and forward/back buttons (note: forward/back buttons not compatible with Mac OS).
- Power Saving Mode: Automatically enters sleep mode after 7 minutes of inactivity.
- Wide Compatibility: Supports Windows 8/9/10/XP, Windows Vista, and Linux (requires software setup for Linux).
What's in the Box
- memzuoix Ergonomic Wireless Mouse
- USB 2.0 Receiver
Note: 2 AAA batteries are required and not included.
Setup Instructions
- Install Batteries:
Locate the battery compartment on the underside of the mouse. Open the compartment and insert two (2) AAA dry cell batteries, ensuring correct polarity. Close the battery compartment securely.

Figure 2: Battery compartment and USB receiver location.
- Connect USB Receiver:
Remove the USB receiver from its storage slot within the battery compartment. Plug the USB receiver into an available USB 2.0 port on your computer (PC, Laptop, Desktop, Mac).

Figure 3: USB receiver connected to a computer.
- Power On:
Turn on the mouse using the power switch located on the underside. The mouse is plug-and-play and should be recognized by your operating system automatically.
- Linux System Setup:
For Linux systems, you may need to set up related software for the mouse to function normally. Refer to your Linux distribution's documentation for peripheral device configuration.
Operating Instructions
Mouse Buttons and Functions:

Figure 4: memzuoix Ergonomic Wireless Mouse button layout.
- Left Button: Standard primary click function.
- Right Button: Standard secondary click function.
- Scroll Wheel: Scroll up or down through documents and web pages.
- DPI Switch Button: Press to cycle through DPI settings (800/1200/1600).
- Previous Page Button: Navigates back in web browsers or file explorers (not compatible with Mac OS).
- Next Page Button: Navigates forward in web browsers or file explorers (not compatible with Mac OS).
Adjusting DPI Sensitivity:
The mouse offers three adjustable DPI (Dots Per Inch) settings: 800, 1200, and 1600. Press the DPI switch button, located near the scroll wheel, to cycle through these settings. Each press will change the cursor speed and precision, allowing you to select the optimal setting for your task.

Figure 5: DPI switch button and sensitivity levels.
Power Saving Mode:
To conserve battery life, the mouse automatically enters a sleep mode after 7 minutes of inactivity. To reactivate the mouse, simply click any button.
Ergonomic Benefits
The vertical design of the memzuoix mouse positions your hand and arm in a more natural "handshake" posture. This design aims to reduce pronation of the forearm and alleviate pressure on the wrist, which can contribute to discomfort or repetitive strain injuries associated with traditional mouse usage.

Figure 6: Ergonomic vs. Traditional Mouse Hand Position.
Video 1: Overview of the memzuoix Ergonomic Wireless Mouse, highlighting its vertical design and features.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the mouse. Avoid using harsh chemicals or abrasive materials.
- Battery Replacement: Replace AAA batteries when the mouse performance degrades or stops responding.
- Storage: When not in use for extended periods, turn off the mouse and store the USB receiver in its designated slot to prevent loss.
Troubleshooting
| Problem | Solution |
|---|---|
| Mouse not responding |
|
| Cursor movement is erratic or slow |
|
| Forward/Back buttons not working on Mac OS | The forward/back buttons are not compatible with Mac OS. This is a design limitation. |
| Mouse enters sleep mode too quickly | The mouse is designed to enter sleep mode after 7 minutes of inactivity to conserve battery. This is normal operation. Click any button to wake it up. |
Specifications
| Feature | Detail |
|---|---|
| Brand | memzuoix |
| Model Number | HLY-JP-WM791 |
| Connectivity Technology | 2.4G Wireless (USB Receiver) |
| Movement Detection Technology | Optical |
| DPI Settings | 800 / 1200 / 1600 |
| Number of Buttons | 6 |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 4.84 x 3.54 x 0.04 inches |
| Item Weight | 2.82 ounces |
| Compatibility | PC, Laptop, Computer, Desktop (Windows 8/9/10/XP, Windows Vista, Linux) |
| Special Features | Ergonomic Design, Lightweight, Portable, Touch Scroll, Wireless |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact memzuoix customer service. Keep your purchase receipt for warranty claims.