GOWIN Colossus Mini

GOWIN Colossus Mini 8-inch Bluetooth Speaker User Manual

Model: Colossus Mini

Brand: GOWIN

Introduction

Thank you for purchasing the GOWIN Colossus Mini 8-inch Bluetooth Speaker. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.

Package Contents

Ensure all items are present in the package:

  • GOWIN Colossus Mini 8-inch Bluetooth Speaker
  • 3.5 mm Auxiliary Cable
  • Remote Control
  • Charging Cable

Product Overview

GOWIN Colossus Mini 8-inch Bluetooth Speaker, front view

Image: Front view of the GOWIN Colossus Mini 8-inch Bluetooth Speaker. The speaker features a yellow casing with a dark gray speaker grille and a black handle on top.

The GOWIN Colossus Mini is a portable 8-inch Bluetooth speaker designed for versatile audio playback. It includes multiple connectivity options and a rechargeable battery for on-the-go use.

Controls and Ports

Rear control panel of GOWIN Colossus Mini speaker

Image: Rear view of the GOWIN Colossus Mini speaker, showing the control panel. The panel includes power switch, mode button, volume knobs, USB/Micro SD slots, auxiliary input, microphone input, and charging port.

The rear panel of the speaker houses all essential controls and connection ports:

  • Power Switch: Turns the speaker ON or OFF.
  • Mode Button: Switches between Bluetooth, FM Radio, USB/Micro SD, and Auxiliary input modes.
  • Volume Knobs: Adjust master volume and microphone volume.
  • USB Port: For playing audio from USB flash drives.
  • Micro SD Card Slot: For playing audio from Micro SD cards.
  • AUX IN (3.5mm): For connecting external audio devices.
  • MIC IN: For connecting a microphone.
  • Charging Port: For connecting the charging cable.
  • LED Display: Shows current mode and track information.

Setup

Initial Charging

Before first use, fully charge the speaker for approximately 10 hours. Subsequent charges will take about 2 hours.

  1. Connect the provided charging cable to the speaker's charging port.
  2. Connect the other end of the charging cable to a suitable power source.
  3. The charging indicator (if available) will illuminate during charging and turn off or change color when fully charged.

Powering On/Off

Locate the Power Switch on the rear panel. Slide it to the "ON" position to power on the speaker. Slide it to the "OFF" position to power off.

Operating Instructions

Bluetooth Pairing

  1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing Bluetooth icon or an audible prompt.
  2. On your mobile device, enable Bluetooth and search for available devices.
  3. Select "GOWIN Colossus Mini" from the list.
  4. Once paired, the speaker will confirm with an audible sound or a solid Bluetooth indicator.
  5. You can now play audio from your device through the speaker.

USB/Micro SD Playback

  1. Insert a USB flash drive or Micro SD card (pre-loaded with MP3 audio files) into the respective port.
  2. The speaker will automatically switch to USB/Micro SD mode and begin playing audio. If not, press the "Mode" button to select the correct input.
  3. Use the playback controls on the speaker or remote control to manage your music.

Auxiliary Input

  1. Connect one end of the 3.5 mm auxiliary cable to the AUX IN port on the speaker.
  2. Connect the other end to the headphone jack or audio output of your external device.
  3. Press the "Mode" button until "AUX" mode is selected.
  4. Control playback and volume from your external device.

FM Radio

  1. Press the "Mode" button to switch to FM Radio mode.
  2. Press and hold the Play/Pause button to automatically scan and save available FM stations.
  3. Use the Previous/Next track buttons to navigate between saved stations.

Microphone Usage

  1. Connect a microphone to the MIC IN port.
  2. Adjust the microphone volume using the dedicated knob on the control panel.

Remote Control

The included remote control allows for convenient operation of the speaker from a distance. Functions include power, mode selection, volume adjustment, track skipping, and play/pause.

Maintenance

  • Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Keep the speaker away from water, moisture, and extreme temperatures.
  • Store in a cool, dry place when not in use for extended periods.

Troubleshooting

ProblemSolution
No powerEnsure the speaker is charged. Check the power switch is in the "ON" position.
No soundCheck volume levels on both the speaker and the connected device. Ensure the correct input mode is selected.
Bluetooth not connectingEnsure the speaker is in Bluetooth mode. Make sure your device's Bluetooth is enabled and within range (up to 10m). Try unpairing and re-pairing.
FM radio staticReposition the speaker to improve reception. Perform an auto-scan for stations again.

Specifications

  • Speaker Size: 8 inches
  • Driver Size: 2 inches
  • Impedance: 4 Ohms
  • Frequency Response: 100 Hz - 18 KHz
  • Connectivity: Bluetooth, USB, Micro SD, 3.5mm AUX
  • Battery: Rechargeable 1800 mAh / 7.4 V
  • Charging Time: Approximately 2 hours (10 hours initial charge)
  • Usage Time: Up to 4 hours
  • Wireless Range: Up to 10 meters
  • Dimensions: 27.5 x 23.5 x 38.5 cm (10.8 x 9.3 x 15.2 inches)
  • Weight: 6.5 kg (14.3 lbs)
  • Material: Wood

Warranty and Support

This GOWIN product comes with a 1-year warranty from the date of purchase. For warranty claims or technical support, please contact GOWIN customer service through their official channels or the retailer where the product was purchased.

For more information, visit the GOWIN Brand Store.

Related Documents - Colossus Mini

Preview Gowin Complex Multiplier IP User Guide
User guide for the Gowin Complex Multiplier IP, detailing its features, port descriptions, timing, configuration, and reference design. This IP is designed for complex number multiplication.
Preview Gowin_EMPU(GW1NS-4C) IDE Software: Comprehensive Reference Manual for Development
This reference manual provides detailed guidance on using the Gowin_EMPU(GW1NS-4C) IDE software, including setup and usage with ARM Keil MDK and GOWIN MCU Designer for embedded system development.
Preview Gowin Virtual Input Output Tool User Guide
User guide for the Gowin Virtual Input Output (GVIO) tool, a digital signal dynamic debugging tool for FPGAs. Covers configuration, usage, and joint debugging with GAO.
Preview Gowin XCORR IP User Guide
User guide for the Gowin XCORR IP, detailing its features, configuration, and usage for cross-correlation operations in FPGA designs. Covers input parameters, port descriptions, timing, and resource utilization.
Preview Gowin Software Tcl Commands User Guide
This user guide provides a comprehensive reference for the Tcl commands used with Gowin Software, detailing command-line interface operations for efficient project management and FPGA design flows, including command syntax, parameters, and examples.
Preview Gowin云源软件用户指南 - GOWIN
用户指南 for Gowin云源软件. This document provides comprehensive instructions and details on using the Gowin Yunyuan software, including its interface, project management, integrated tools, output files, and Tcl commands. It covers version information and support details.