Introduction
Thank you for choosing the NICREW C10 24/7 LED Aquarium Light. This advanced lighting system is designed to provide optimal illumination for your aquatic environment, simulating natural light cycles and offering a customizable spectrum. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.
Safety Instructions
- Always disconnect the power supply before performing any maintenance or installation.
- This product is designed for indoor use with aquariums only. Do not use it for other purposes.
- Ensure your hands are dry when handling the power adapter and plug.
- Do not immerse the light fixture or power adapter in water.
- Keep out of reach of children.
- If any part of the product is damaged, discontinue use immediately and contact customer support.
Package Contents
Verify that all components are present in the package:
- NICREW C10 LED Aquarium Light Fixture
- Adjustable Sliding Tank Mounts (2 units)
- Power Adapter
- User Manual
Setup
- Attach Mounting Brackets: Slide the adjustable tank mounts onto both ends of the light fixture. Ensure they are securely fastened.
- Position the Light: Place the light fixture on top of your aquarium, adjusting the sliding mounts to fit the width of your tank. The light should sit securely on the edges of the aquarium.
- Connect Power: Plug the power adapter into the light fixture, then plug the adapter into a suitable electrical outlet. Ensure a drip loop is formed to prevent water from running down the cord to the outlet.
Operating Instructions
24/7 Lighting Cycle
The NICREW C10 features a programmable 24-hour lighting cycle that simulates natural daylight. Simply press the dedicated 24/7 button on the remote control to activate the preset cycle.
Preset Modes
The light offers four distinct preset modes to suit different aquatic environments:
- Warm White (5000K): For a soft, natural glow.
- Cool White (7500K Max): Provides bright, crisp illumination.
- Bluish White (12000K): Enhances blue tones for a marine or deep-water effect.
- Intense Blue Moonlight: Creates a calming nighttime ambiance.
Customizing the 24/7 Cycle and Colors
You can personalize the lighting by adjusting colors and intensities across 10 different time phases. The remote control allows for precise adjustment of individual red, green, blue, and white LEDs from 0% to 100% brightness, enabling you to reproduce various wild aquatic environments.
High-Quality LED Features
The NICREW C10 is equipped with advanced LEDs for optimal performance:
- CRI 90: High Color Rendering Index brings out vivid and natural colors of your aquarium inhabitants and decor.
- 660nm Red LEDs: Maximizes photosynthesis, extending warm tones beneficial for plant growth.
- 120° Optic Angle: Provides wide and even illumination without dead spots.
- 6500K White LEDs with Tri-colored RGB LEDs: A balanced combination for plant growth and vibrant color display.
Superior Performance Design
- Sturdy Aluminum Hood: Lighter design provides a modern look and contributes to a smaller carbon footprint.
- Heat Sink Optimization: Maximizes surface area for better heat dispersion, keeping your tank and LED circuitry cool.
- Water-Resistant: Glue seals prevent daily splash and humidity intrusion, enhancing durability.
Maintenance
- Cleaning: Regularly wipe the light fixture with a soft, damp cloth to remove dust and water spots. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners.
- Cable Inspection: Periodically check the power cord and adapter for any signs of damage.
- Ventilation: Ensure the heat sink areas are free from obstructions to allow for proper heat dissipation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Faulty connection. | Check if the power adapter is securely plugged into the outlet and the light fixture. Test the outlet with another device. |
| Light cycle is incorrect or not functioning. | Incorrect settings. Remote control issue. | Ensure the 24/7 mode is activated. Refer to the operating instructions for customizing the cycle. Check remote control battery. |
| Light is dim or flickering. | Power supply issue. LED malfunction. | Check power connections. If the problem persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | N83112 |
| Dimensions (L x W x H) | 50 x 5 x 3 cm |
| Weight | 600 grams |
| Power Consumption | 13 Watts |
| Voltage | 230 Volts |
| Light Source Type | LED (Light Emitting Diode) |
| Color Rendering Index (CRI) | 80 |
| Material | Metal |
| Battery | 1 Lithium metal (included) |
Warranty and Support
The NICREW C10 24/7 LED Aquarium Light comes with a 12-month hassle-free warranty from the date of purchase. This warranty covers manufacturing defects and ensures reliable operation under normal use.
For technical support, warranty claims, or any questions regarding your product, please contact NICREW customer service. Our friendly 24-hour customer service team is available to assist you.
Contact Information:
Please refer to the contact details provided on the NICREW official website or your purchase documentation for the most up-to-date support information.