TASER Pulse 2

TASER Pulse 2 Self-Defense Kit User Manual

Model: Pulse 2 | Brand: TASER

Introduction

The TASER Pulse 2 is a compact and effective less-lethal self-defense device designed for personal protection. This manual provides essential information for the safe and proper operation, maintenance, and care of your TASER Pulse 2 device.

It is crucial to read this manual thoroughly before using the device. Understanding its features and proper handling procedures is vital for your safety and the device's effectiveness.

Safety Information

WARNING: This device is a less-lethal weapon and should be handled with extreme care. Improper use can result in serious injury or death. Always adhere to local laws and regulations regarding the ownership and use of self-defense devices.

Do not aim at the head, neck, or sensitive areas.
Keep out of reach of children.
Ensure the safety switch is engaged when not in use.
Do not use if the device appears damaged.
Familiarize yourself with all local laws concerning the use and possession of TASER devices.
Training is highly recommended before carrying this device for self-defense.

Package Contents

TASER Pulse 2 kit contents in a hard case, including the device, two cartridges, a soft carry sleeve, and a conductive practice target.

Image: Contents of the TASER Pulse 2 Self-Defense Kit, neatly arranged in its hard carrying case.

Your TASER Pulse 2 Self-Defense Kit includes the following components:

1x TASER Pulse 2 Device
2x Replaceable Live Cartridges
1x Battery Pack
1x Conductive Practice Target
1x Soft Carry Sleeve
1x Rugged Carrying Case

Product Overview

Diagram of TASER Pulse 2 with labeled components: LED Indicator, Mechanical Sights, Safeties (Dual Sided), Textured Grip, Battery Pack, Trigger & Trigger Guard, Flashlight & LASER Sight, Self Defense Cartridge, Probe.

Image: Labeled components of the TASER Pulse 2 device.

The TASER Pulse 2 features a user-friendly design with several key components:

LED Indicator: Displays battery status and device readiness.
Mechanical Sights: For accurate aiming.
Safeties (Dual Sided): Ambidextrous safety switch to prevent accidental discharge.
Textured Grip: Provides a secure and comfortable hold.
Battery Pack: Powers the device.
Trigger & Trigger Guard: Activates the device and protects against accidental trigger pull.
Flashlight & LASER Sight: Built-in illumination and targeting laser for improved accuracy.
Self-Defense Cartridge: Contains probes and conductive wires.
Probes: Eject from the cartridge to deliver the electrical pulse.

Setup

Battery Installation

The TASER Pulse 2 typically comes with a battery pack. If not pre-installed, follow these steps:

Ensure the safety switch is in the "SAFE" (down) position.
Locate the battery compartment at the base of the grip.
Insert the battery pack according to the polarity indicators.
Securely close the battery compartment.

Cartridge Installation

To prepare your device for use, install a cartridge:

Ensure the safety switch is in the "SAFE" (down) position.
Point the device in a safe direction.
Align the cartridge with the front of the device, ensuring the top of the cartridge matches the top of the device.
Push the cartridge firmly into the device until it clicks into place. Do not force it.
To remove, press the cartridge release buttons on the sides of the device and pull the cartridge out.

Operating Instructions

Engaging the Safety

The TASER Pulse 2 features a dual-sided safety switch. To engage the safety, push the switch down to the "SAFE" position. To disengage and prepare for firing, push the switch up to the "ARMED" position. Always keep the safety engaged until you are ready to deploy the device.

Aiming and Firing

Person holding the TASER Pulse 2 with both hands, aiming forward in an outdoor setting.

Image: Proper two-hand grip and aiming posture with the TASER Pulse 2.

Identify Threat: Only use the device when faced with an immediate threat to your safety or the safety of others.
Disengage Safety: Push the safety switch up to the "ARMED" position. The laser sight and flashlight will activate.
Aim: Use the laser sight to aim at the target's center mass. The optimal range is up to 15 feet.
Fire: Pull the trigger firmly. The probes will deploy, and the device will deliver a 30-second Neuro-Muscular Incapacitation (NMI) cycle.
Re-engage Safety: After deployment, if the threat is neutralized, immediately re-engage the safety switch to the "SAFE" position.

The device is designed to temporarily override an attacker's central nervous system, limiting muscular control for 30 seconds, allowing you time to escape to safety.

Maintenance

Cleaning

Keep your TASER Pulse 2 clean and free of debris. Use a soft, dry cloth to wipe down the exterior. Do not use abrasive cleaners or immerse the device in water.

Battery Check

Regularly check the battery indicator to ensure your device is powered. Replace the battery pack when the indicator shows low power. The battery is not designed to be user-replaceable in the field; contact TASER for service if needed.

Storage

Store the TASER Pulse 2 in its rugged carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the safety switch is engaged during storage.

Image: The TASER Pulse 2 stored securely on a nightstand.

Troubleshooting

Problem	Possible Cause	Solution
Device does not power on.	Low or dead battery.	Replace the battery pack.
Probes do not deploy.	No cartridge installed or cartridge is faulty.	Ensure a fresh cartridge is properly installed. If issue persists, replace cartridge.
Laser sight/flashlight not working.	Safety engaged or battery low.	Disengage safety. Check/replace battery.
Device feels loose or rattles.	Internal component dislodged.	Contact Axon Enterprise, Inc. for warranty service. Do not attempt to repair yourself.

Specifications

Model Name: Pulse 2
Brand: TASER
Voltage: 50000 Volts
Shooting Distance: 15 feet
Neuro-Muscular Incapacitation (NMI) Duration: 30 seconds
Item Weight: 8 ounces
Product Dimensions (LxW): 5.25" x 1.25"
Material: High-Impact Polymer
Included Components: 2 Cartridges, Hard Case, Practice Target, Pulse 2 Handle
Manufacturer: Axon Enterprises, Inc.
UPC: 796430014976

Warranty and Support

Warranty Information

The TASER Pulse 2 comes with a 1 Year Manufacturer's Limited Warranty provided by Axon Enterprise, Inc. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

For technical assistance, warranty claims, or general inquiries, please contact Axon Enterprise, Inc., the manufacturer of TASER products. Refer to the official TASER website or product packaging for the most current contact information.

Important Note: If your device malfunctions or is damaged, do not attempt to repair it yourself. Unauthorized repairs may void your warranty and could be dangerous.

Additional Resources

For further information, training resources, and product registration, please visit the official TASER website:

Official TASER Website

Consider enrolling in a certified TASER training course to maximize your proficiency and understanding of the device.

Product in Use

A person wearing jeans and a plaid shirt, with the TASER Pulse 2 in a black holster on their right hip.

Image: TASER Pulse 2 carried in a holster on the hip.

A person wearing athletic wear, with the TASER Pulse 2 in a soft black carry sleeve attached to their waist.

Image: TASER Pulse 2 carried in a soft sleeve.

Important Notice Regarding Videos

No official product videos from the seller were found in the provided data that met the criteria for inclusion in this manual. For product demonstrations or instructional videos, please refer to the official TASER website or authorized channels.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.