Introduction
This manual provides essential information for the safe and efficient operation of your VRURC Mini Portable Charger. Please read it thoroughly before use and retain it for future reference.
The VRURC Mini Portable Charger is a compact 5000mAh power bank designed for iPhone and AirPods, featuring PD 20W fast charging and a convenient built-in Lightning connector with a foldable stand.
Product Features
- PD 20W Fast Charging: The integrated Lightning cable delivers up to 20W, charging an iPhone 13 from 0% to 60% in approximately 30 minutes. Supports 5V-3A and 9V-2.2A output modes.
- Exclusive Design for iPhone: Compatible with all iPhone models (iPhone 6 through 14 series, including Mini/Plus/Pro/Max, SE, X/XR/XS/XS Max) and AirPods/AirPods Pro.
- Built-in Cable & Foldable Metal Stand: Eliminates the need for extra cables. The foldable stand allows for versatile viewing angles (horizontal or vertical) while charging.
- 5000mAh Capacity: Provides emergency power, typically charging an iPhone 0.8 to 1.5 times, or AirPods up to 5 times.
- Mini Size & Portable: Dimensions of 3.07 x 1.44 x 1.07 inches and a weight of 0.23 lbs ensure easy portability in pockets or bags.
- Direct Charge Without Removing Case: Compatible with phone cases up to 4mm thickness.
Package Contents
- 1 X VRURC Mini Portable Charger 5000mAh
- 1 X USB-A to USB-C Cable
- 1 X User Manual
Setup
1. Initial Charging of the Power Bank
Before first use, fully charge the VRURC Mini Portable Charger. Connect the provided USB-A to USB-C cable to the USB-C input port on the power bank and plug the USB-A end into a compatible power adapter (not included). The LED indicators will illuminate to show charging progress.
Figure 1: Charging the power bank via USB-C input. A 9V/2A power adapter can fully charge the device in 1.5 hours.
2. Checking Battery Level
Press the power button on the side of the power bank. The LED indicators will light up to show the remaining battery capacity. Four illuminated LEDs indicate a full charge.
Operating Instructions
1. Charging Your Device
- Remove the protective cap from the built-in Lightning connector.
- Align the Lightning connector with your iPhone's charging port and firmly plug it in. Ensure your phone case does not exceed 4mm in thickness for a secure connection.
- The power bank will automatically begin charging your device. The LED indicators on the power bank will show its remaining charge.
Figure 2: The VRURC Mini Portable Charger directly connected to an iPhone, showing the charging status.
Figure 3: The power bank is designed to charge devices without removing cases, provided the case thickness is less than 4mm.
2. Using the Foldable Stand
The power bank features a foldable metal stand on its back. Gently pull out the stand to prop up your device in either horizontal or vertical orientation while it charges. This allows for convenient viewing of content or video calls.
Figure 4: The foldable stand allows for hands-free viewing of your device in both portrait and landscape modes while charging.
3. Pass-Through Charging
The power bank supports pass-through charging. This means you can charge the power bank itself while it is simultaneously charging your connected device. Connect the USB-A to USB-C cable to the power bank's input and a power source, then connect your iPhone to the power bank's Lightning connector.
Figure 5: Illustrates the power bank being charged from a wall adapter while simultaneously charging a connected iPhone.
Maintenance
- Keep the power bank dry and away from moisture.
- Avoid exposing the device to extreme temperatures (hot or cold).
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store in a cool, dry place when not in use.
Troubleshooting
- Device not charging: Ensure the power bank is charged. Check that the Lightning connector is fully inserted into your device. Verify that your phone case is not too thick (max 4mm).
- Slow charging: Ensure both the power bank and your device support fast charging. If your device does not support PD 20W, it will charge at a standard 5V speed.
- Power bank not charging: Ensure the USB-C cable is properly connected to both the power bank and the power adapter. Try a different cable or power adapter.
Specifications
| Feature | Detail |
|---|---|
| Model Number | T0558P |
| Capacity | 5000mAh / 18.5Wh |
| Battery Type | High Density Lithium Polymer |
| Input (USB-C) | 5V-3A, 9V-2A, 12V-1.5A |
| Output (Lightning) | 5V-3A, 9V-2.2A |
| Dimensions | 3.07 x 1.45 x 1.08 inches (78.1 x 36.8 x 27.4 mm) |
| Item Weight | 3.7 ounces (105g) |
| Connector Type | Lightning |
| Special Feature | Fast Charging, Portable Charger, Foldable Stand |
Safety Information
- Do not disassemble, modify, or repair the device.
- Avoid dropping, hitting, or subjecting the device to strong impacts.
- Keep away from fire, water, and corrosive liquids.
- Do not use or store in high-temperature environments or direct sunlight.
- Dispose of the product according to local regulations. Do not dispose of with household waste.
Warranty and Support
This product comes with a 12-month care plan and 30-day exchange service. For customer service or support, please refer to the contact information provided in the product packaging or visit the official VRURC website.
Manufacturer: Dong guan Utopia-Originality Technology Co., Ltd
For more information, visit the VRURC Store.
