seenda IWG-FGM02 Rechargeable LED Wireless Mouse User Manual

Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your seenda IWG-FGM02 Rechargeable LED Wireless Mouse. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Figure 1: seenda IWG-FGM02 Rechargeable LED Wireless Mouse. This image displays the overall design of the mouse, highlighting its ergonomic shape and LED lighting.

Package Contents

Ensure all items are present in the package:

• seenda IWG-FGM02 Rechargeable LED Wireless Mouse
• USB Receiver (typically stored in the mouse's battery compartment)
• USB Charging Cable
• User Manual (this document)

Setup Instructions

1. Charging the Mouse

Before first use, fully charge the mouse. Connect the provided USB charging cable to the charging port on the front of the mouse and the other end to a USB power source (e.g., computer USB port, USB wall adapter).

• The LED indicator will typically show charging status (e.g., red light for charging, off when fully charged).
• A full charge usually takes 2-3 hours.

2. Connecting the USB Receiver

The mouse connects wirelessly via a 2.4 GHz USB receiver.

1. Locate the USB receiver, usually stored in a slot on the bottom of the mouse.
2. Remove the receiver and plug it into an available USB port on your computer.
3. Your computer should automatically detect and install the necessary drivers. This may take a few moments.

3. Powering On/Off

Locate the power switch on the bottom of the mouse. Slide the switch to the "ON" position to activate the mouse. Slide it to "OFF" when not in use to conserve battery life.

Operating Instructions

1. Basic Mouse Functions

The seenda IWG-FGM02 mouse features standard left-click, right-click, and scroll wheel functions. Use these for navigation and interaction with your computer's operating system and applications.

2. DPI Adjustment

The mouse typically includes a DPI (Dots Per Inch) button, often located near the scroll wheel, to adjust cursor sensitivity. Press this button to cycle through different DPI settings (e.g., 800, 1200, 1600 DPI). A higher DPI setting results in faster cursor movement across the screen.

3. LED Lighting Control

The mouse features LED lighting. Depending on the model, the lighting may be static, breathing, or switchable. Refer to the product packaging or specific model features for details on how to change or disable the LED effects. Some models may have a dedicated button for LED control, while others may integrate it with DPI or power functions.

Maintenance

1. Cleaning the Mouse

To maintain optimal performance and hygiene, clean your mouse regularly.

• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution.
• Avoid using harsh chemicals, abrasive cleaners, or spraying liquids directly onto the mouse.
• Clean the optical sensor on the bottom of the mouse periodically to prevent tracking issues.

2. Battery Care

As a rechargeable mouse, proper battery care extends its lifespan.

• Avoid completely draining the battery frequently. Recharge when the low battery indicator appears.
• Do not expose the mouse to extreme temperatures.
• If storing the mouse for an extended period, charge it to about 50% before storage.

Troubleshooting

If you encounter issues with your seenda IWG-FGM02 mouse, refer to the following common solutions:

1. Mouse Not Responding

• Check Power: Ensure the mouse is switched "ON" and has sufficient battery charge. Recharge if necessary.
• Check USB Receiver: Ensure the USB receiver is securely plugged into a working USB port on your computer. Try a different USB port.
• Re-pair: In some cases, you may need to re-pair the mouse with its receiver. This usually involves turning the mouse off and on, or pressing a connect button on the mouse/receiver (if available).
• Interference: Move the mouse closer to the receiver or away from other wireless devices that might cause interference.

2. Cursor Movement is Erratic or Jumpy

• Clean Sensor: Clean the optical sensor on the bottom of the mouse with a soft cloth.
• Surface: Use the mouse on a clean, non-reflective, opaque surface. Avoid glass or highly reflective surfaces. A mouse pad is recommended.
• DPI Setting: Adjust the DPI setting to a lower value if the cursor is too sensitive.

3. LED Lights Not Working

• Battery Level: Ensure the mouse has enough charge. Low battery can sometimes affect LED functionality.
• LED Control: If your mouse has a dedicated LED control button, press it to cycle through modes or turn the lights on.

4. Charging Issues

• Cable Check: Ensure the USB charging cable is not damaged and is securely connected. Try a different USB cable if available.
• Power Source: Try a different USB power source (e.g., another USB port on your computer, a different wall adapter).

Specifications

Warranty Information

The seenda IWG-FGM02 Rechargeable LED Wireless Mouse comes with a 1 Year Warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.

Support and Contact

For further assistance, technical support, or warranty inquiries, please contact the importer or manufacturer:

• Importer: Digital Pentagram
• Email: t.yadav@digitalpentagram.com
• Phone: 09999325592
• Manufacturer: Seenda, Shenzen Seenda, www.seenda.com

When contacting support, please have your product model (IWG-FGM02) and proof of purchase available.