Stokke Sleepi Bed V3 Instruction Manual

1. Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your Stokke Sleepi Bed V3. Please read all instructions carefully before assembly and retain this manual for future reference. The Stokke Sleepi Bed V3 is designed for children from birth up to approximately 5 years of age, adapting to their growth stages.

Image 1.1: The Stokke Sleepi Bed V3, showcasing its oval design and natural wood finish.

2. Safety Information

Your child's safety is paramount. Always follow these guidelines:

• Assembly: Ensure all parts are correctly assembled and securely fastened before use. Regularly check all screws and fittings to ensure they remain tight.
• Mattress: Use only the Stokke Sleepi mattress designed for this bed (sold separately). The mattress must fit snugly without gaps to prevent entrapment.
• Slat Spacing: The Stokke Sleepi Bed V3 is certified by JPMA and meets or exceeds all ASTM safety standards. Ensure no gaps exist where a child's head or limbs could become entrapped.
• Adjustable Height: Always use the lowest mattress position once your child can sit up unaided, pull themselves up, or stand.
• Wheels: Always engage the lockable swivel wheels when the bed is stationary to prevent unintended movement.
• Environment: Do not place the bed near windows where cords from blinds or drapes could pose a strangulation hazard. Keep the bed away from heat sources.
• Weight Limit: The maximum weight recommendation for this bed is 300 pounds.

Image 2.1: The Stokke Sleepi Bed V3 is JPMA certified, indicating compliance with safety standards.

3. What's Included

Carefully unpack all components and verify that all parts are present before beginning assembly. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

Image 3.1: Components included in the Stokke Sleepi Bed V3 package.

• Stokke Sleepi Bed Frame
• Stokke Sleepi Bed Mattress Base (perforated for air circulation)
• Swivel Wheels (4 units)
• Hardware (screws, brackets, Allen key)

Note: The Stokke Sleepi mattress is sold separately and is not included with the bed frame.

4. Setup and Assembly

Assembly of the Stokke Sleepi Bed V3 is required. It is recommended to have two adults for assembly. Follow the detailed graphical instructions provided in the separate assembly guide included with your product. Ensure all connections are tight and secure. If you encounter any issues with missing or defective parts, refer to the Troubleshooting section.

Image 4.1: The bed frame is constructed from FSC-certified beechwood.

5. Operating and Usage

The Stokke Sleepi Bed V3 is designed to adapt to your child's developmental stages:

• Adjustable Mattress Platform: The bed features a height-adjustable, perforated mattress platform to offer maximum air circulation and allow you to easily reach your newborn. Adjust the height as your child grows.
• Lockable Swivel Wheels: The integrated lockable swivel wheels allow for easy movement of the bed between rooms. Always lock the wheels when the bed is in a stationary position.
• Removable Side Rails: One side of the bed can be removed to facilitate easy access for both children and parents, promoting independence as your child grows. This feature is intended for use when your child is old enough to safely enter and exit the bed independently.

Image 5.1: Key features of the Stokke Sleepi Bed V3.

Growth Stages

The Sleepi Bed V3 accommodates children through various stages:

• 0-6 Months: Use the highest mattress setting for easy access to your newborn.
• 0-18 Months: Lower the mattress as your baby becomes more mobile.
• 18 Months - 5 Years: Use the lowest mattress setting. The bed can be converted into a toddler bed by removing one side rail, allowing the child to climb in and out independently.

Image 5.2: The Stokke Sleepi Bed V3 adapts to your child's growth from infancy to early childhood.

Image 5.3: Removable side rails allow easy access for both children and parents.

6. Maintenance

To maintain the quality and longevity of your Stokke Sleepi Bed V3:

• Cleaning: Wipe the bed frame with a damp cloth. Avoid using abrasive cleaners or strong chemicals, as these can damage the wood finish.
• Inspections: Periodically check all screws, bolts, and fittings to ensure they are tight and secure. Tighten as necessary.
• Storage: If storing the bed, ensure it is clean and dry. Store in a climate-controlled environment to prevent warping or damage to the wood.

7. Specifications

8. Troubleshooting

This section addresses common issues you might encounter:

• Missing or Defective Parts: If you find any parts missing or defective upon opening the package, do not attempt to assemble the bed. Contact Stokke customer support immediately for assistance.
• Difficulty Assembling: Ensure you are following the assembly guide step-by-step. Verify that all components are oriented correctly. If issues persist, double-check the hardware and ensure no parts are bent or damaged.
• Bed Feels Unstable: Re-check all screws and bolts to ensure they are fully tightened. An unstable bed can be a safety hazard.
• Child's Limbs Getting Stuck: Ensure the mattress fits snugly within the bed frame with no gaps. Always use the lowest mattress setting once your child can sit up or stand. If you have concerns about slat spacing, contact Stokke customer support.

9. Warranty and Support

For warranty information, product registration, or to contact customer support regarding any issues, please visit the official Stokke website or refer to the warranty card included with your purchase. Providing your model number (591601) and proof of purchase will help expedite support requests.

You can find more information and support at the Stokke Store on Amazon.