1. Introduction
Thank you for choosing the Mumgaroo Wearable Breast Pump. This innovative device is designed to provide a hands-free, comfortable, and efficient pumping experience for mothers. With its LED display, multiple modes, and quiet operation, it allows you to express milk discreetly and conveniently, whether at home or on the go.
This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your Mumgaroo Wearable Breast Pump to ensure optimal performance and longevity.
2. Product Components
The Mumgaroo Wearable Breast Pump is designed with fewer parts for easy assembly and cleaning. Below are the main components included with your pump:
- Pump Motor Unit: The main electronic component with LED display and controls.
- Milk Collector Cup: Transparent cup for collecting expressed milk, with measurement markings.
- Silicone Flange: Soft, comfortable silicone part that comes into contact with the breast.
- Silicone Diaphragm: Prevents milk backflow into the motor.
- Duckbill Valve: Ensures one-way milk flow.
- USB Type-C Charging Cable: For recharging the pump motor.
- Bra Adjustment Buckle: An accessory to help secure the pump in your bra.

Figure 2.1: Overview of the Mumgaroo Wearable Breast Pump and its included accessories.

Figure 2.2: The breast pump disassembled into its main components, highlighting its simple design for easy handling.
3. Setup and Assembly
Before first use, sterilize all parts that come into contact with breast milk (milk collector, flange, diaphragm, duckbill valve) according to standard sterilization methods for baby feeding equipment. Ensure all parts are completely dry before assembly.
- Insert Silicone Diaphragm: Place the silicone diaphragm securely into the milk collector cup.
- Install Silicone Flange: Attach the silicone flange to the milk collector, ensuring the pouring hole aligns correctly. Press the edges to fasten tightly.
- Attach Duckbill Valve: Insert the duckbill valve firmly into its designated slot at the bottom of the milk collector.
- Connect Pump Motor: Align the pump motor unit with the assembled milk collector and press down firmly until it clicks into place. Ensure a secure fit to prevent leaks and maintain suction.

Figure 3.1: Visual guide for the assembly process of the breast pump.
Video 3.1: A demonstration of how to easily install and use the Mumgaroo Wearable Breast Pump, showcasing its simple assembly.
4. Operating Instructions
The Mumgaroo Wearable Breast Pump features an intuitive LED screen and multiple modes to customize your pumping experience.
4.1 Powering On/Off and Mode Selection
- Power Button: Press and hold the power button (center button) to turn the pump on or off.
- Mode Selection: Briefly press the power button to cycle through the 3 available modes:
- Suction Mode: Slow and deep suction to effectively express milk.
- Massage Mode: Fast and shallow stimulation to encourage milk let-down.
- Automatic Mode: A combination of massage and suction, suitable for various needs.
- Adjusting Levels: Use the '+' and '-' buttons to adjust the suction intensity within each mode. There are 12 levels available for personalized comfort and efficiency.

Figure 4.1: The Smart LED Screen clearly displays the current mode, suction level, and pumping time.

Figure 4.2: Visual representation of the 3 distinct pumping modes and their corresponding suction rhythms.
4.2 Hands-Free Pumping
Once assembled, place the pump inside your nursing bra, ensuring the flange is centered on your nipple. The pump's compact and quiet design allows for discreet use while performing daily activities.
Video 4.1: A user demonstrates the hands-free convenience of the Mumgaroo breast pump, highlighting its ease of use during daily tasks.
Video 4.2: This video illustrates the ultra-quiet operation of the Mumgaroo pump, emphasizing its discreet nature for use anywhere.
4.3 Anti-Backflow Design
The pump features an anti-backflow system with a silicone diaphragm and duckbill valve to prevent milk from flowing back into the motor or tubing, ensuring hygiene and maintaining milk freshness.

Figure 4.3: The anti-backflow design ensures no milk leakage and keeps breast milk fresh.
5. Cleaning and Maintenance
Proper cleaning and maintenance are crucial for hygiene and the longevity of your breast pump. All parts that come into contact with breast milk are dishwasher safe.
5.1 Daily Cleaning
- Disassemble all parts that come into contact with breast milk (milk collector, flange, diaphragm, duckbill valve).
- Wash these parts immediately after each use with warm, soapy water. Use a soft brush for thorough cleaning.
- Rinse thoroughly with clean water.
- Air dry on a clean drying rack or use a clean cloth.
- Do not wash the pump motor unit. Wipe it clean with a damp cloth if necessary.

Figure 5.1: The pump's design with fewer parts makes it super easy to clean after each use.
5.2 Charging
The pump is equipped with a powerful, large-capacity rechargeable battery. Use the provided USB Type-C cable to charge the unit. A full charge takes approximately 2.5 hours and provides power for 3-6 pumping sessions (90 minutes total).

Figure 5.2: The pump features a Type-C port for convenient charging from various sources.
6. Troubleshooting
If you encounter any issues with your Mumgaroo Wearable Breast Pump, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No suction or weak suction | Improper assembly, damaged silicone parts, low battery. | Ensure all parts are correctly assembled and securely fitted. Check for tears or damage on the silicone diaphragm and duckbill valve; replace if necessary. Charge the pump fully. |
| Milk leakage | Incorrect assembly, overfilling the milk collector, improper fit. | Verify all parts are tightly sealed. Do not exceed the maximum fill line (180mL/6oz). Adjust the pump position for a better seal against the breast. |
| Pump not turning on | Low battery, power button not pressed correctly. | Charge the pump for at least 2.5 hours. Press and hold the power button firmly for a few seconds. |
| Uncomfortable pumping | Incorrect flange size, suction level too high. | Ensure you are using the correct flange size (standard is 24mm). Adjust the suction level to a comfortable setting using the '+' and '-' buttons. |
If the problem persists after trying these solutions, please contact Mumgaroo customer support for further assistance.
7. Product Specifications
- Product Dimensions: 7.09 x 6.3 x 5.51 inches
- Item Weight: 12.6 ounces
- Material Type: Silicone
- Power Source: Battery Powered (Rechargeable via Type-C)
- Modes: 3 (Suction, Massage, Automatic)
- Suction Levels: 12
- Noise Level: Ultra-Quiet (approx. 30dB)
- Milk Collector Capacity: Up to 180mL (6oz)
- Dishwasher Safe Parts: Yes (parts that contact milk)
- Auto Shut-off: Yes, after 20 minutes of use
8. Warranty and Support
Mumgaroo is committed to providing high-quality products. For any questions regarding your breast pump, replacement parts, or accessories, please contact the Mumgaroo support team. You can also refer to the official user manual PDF for more detailed information: