Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Akicon E70 36-inch 600 CFM Built-in Range Hood Insert. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your kitchen ventilation system. Keep this manual for future reference.
What's in the Box
Carefully unpack the range hood and check for any shipping damage. Ensure all components are present before proceeding with installation.
- Insert Range Hood
- Charcoal Filter (for ductless option)
- Installation Screws
- Baffle Filters
- Installation Manual
Setup and Installation
Proper installation is crucial for the performance and safety of your range hood. It is recommended that installation be performed by a qualified installer.
1. Preparation and Measurement
Before installation, verify the dimensions of the range hood and the cabinet opening. The recommended opening size for this 36-inch model is approximately 33-7/8 inches by 10-1/4 inches. Ensure adequate space for the ventilation system.
Image: Size specification diagram for the range hood insert.
2. Remove Protective Tape from Baffle Filters
Before installing the unit, carefully peel off any protective tape from the baffle filters. This ensures proper airflow and appearance.
Video: Demonstrates how to quickly peel off the protective tape from the baffle filters.
3. Install Plastic Chimney Apparatus
Assemble the silicone sealing ring and damper flapper onto the plastic adapter. Secure the 6-inch adapter plate to the top of the housing using an electric screwdriver. Ensure correct orientation to avoid improper installation.
4. Prepare Cabinet for Installation
Install a sturdy wood frame within the cabinet opening to securely fix the range hood. This frame provides the necessary support for the unit.
5. Attach Ductwork
Remove the baffle filters from the range hood. Attach the ductwork to the plastic chimney apparatus on the top of the hood. Apply HVAC tape over the connection to ensure a secure and airtight seal.
6. Mount the Range Hood
Carefully slide the range hood housing into the prepared wood frame in the cabinet. Secure it by screwing the unit into the wood frame. Once mounted, reinsert the baffle filters.
Video: A comprehensive guide to the installation process of the Akicon Built-in/Insert Range Hood.
Operating Instructions
The Akicon E70 range hood features user-friendly push-button controls for fan speed and lighting.
1. Power On/Off
Connect the range hood to a power source. The unit is ready for operation.
2. Fan Speed Control
The range hood is equipped with a 3-speed fan. Use the push buttons on the control panel to select your desired fan speed: low (35dB), medium, or high (65dB). The powerful 600 CFM airflow effectively removes cooking fumes and odors.
Image: Illustration of the range hood's powerful 600 CFM airflow in action.
Image: Demonstrates the ultra-quiet operation of the range hood.
3. LED Lighting
Activate the energy-efficient LED lights using the dedicated push button. The unit comes with 3000K LED lights and includes extra 5500K warm LED lights for different cooking needs, providing ample illumination for your cooking area.
Video: Highlights the features of the Akicon 36'' Built-in Range Hood Insert, including LED lights and controls.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your range hood.
1. Cleaning Baffle Filters
The stainless steel baffle filters are dishwasher-safe and easily removable for cleaning. Remove the filters by pulling the latch and sliding them out. Clean them regularly to prevent grease buildup and maintain efficient filtration.
Image: Detailed view of the range hood components, including removable baffle filters.
2. Replacing Charcoal Filters (if applicable)
If using the range hood in a ductless configuration, the charcoal filters will need periodic replacement. These filters effectively capture cooking grease and oil. Refer to the charcoal filter's specific instructions for replacement frequency.
Image: View of the charcoal filter, highlighting its function in filtering harmful particulates.
3. Cleaning Exterior Surfaces
Clean the exterior stainless steel surfaces with a mild detergent and a soft cloth. Avoid abrasive cleaners or scouring pads that could scratch the finish.
Troubleshooting
This section provides solutions to common issues you might encounter with your Akicon E70 range hood. For problems not listed here, please contact customer support.
- No Power: Check if the power cord is securely plugged into an outlet. Verify the circuit breaker or fuse.
- Weak Suction: Ensure baffle filters are clean and not clogged. Check if the ductwork is properly installed and free of obstructions.
- Excessive Noise: Confirm that the range hood is securely mounted and all screws are tightened. Check for any loose parts or obstructions in the fan.
- Lights Not Working: Check if the LED light button is pressed. If individual lights are out, they may need replacement.
Specifications
| Brand | Akicon |
| Model Number | E70 |
| Product Dimensions | 11.75"D x 35.4"W x 11"H |
| Color | Warm White |
| Finish Type | Brushed |
| Material Type | Stainless Steel |
| Air Flow Capacity | 600 Cubic Feet Per Minute (CFM) |
| Noise Level | 65 Decibels (Max) |
| Mounting Type | Built-In Mount |
| Controls Type | Push Button |
| Voltage | 120 Volts (AC) |
| Number of Speeds | 3 |
| Light Source | LED (3000K and 5500K options) |
| Filter Type | Charcoal, Baffle |
| Ventilation Type | Ducted |
| Item Weight | 26.7 Pounds |
| Specification Met | ETL Certified |
Warranty and Support
Your Akicon E70 Range Hood Insert comes with a 3-year limited warranty, covering defects in materials and workmanship under normal use.
For any questions, problems, or missing parts, please contact Akicon Customer Service:
- Service Hours: 8 a.m. ~ 6 p.m. EST, Monday-Friday
- Phone: +1 (302) 213-4406
- Email: service@akiconshop.com
Please have your model number (E70) and purchase information ready when contacting support.