Introduction
Thank you for choosing the Glangeh B6 Anti-Drop Phone Holder. This manual provides essential information for the safe and effective use of your new phone holder. Designed for motorcycles, bicycles, scooters, and more, this holder ensures your smartphone remains secure and accessible during your rides.
Key features include a unique anti-collision design with reinforced silicone cushions, 360-degree rotation for optimal viewing, a strong non-slip security lock, and quick, tool-free installation.
Front view of the Glangeh B6 Phone Holder, showcasing its robust design.
Setup and Installation
The Glangeh B6 Phone Holder is designed for quick and easy installation without the need for any tools. Follow these steps to securely mount your holder:
- Attach the Holder Base: Insert the holder's base into the fixing slot at the rear of the clamp mechanism. Ensure it clicks into place securely.
- Mount to Handlebar: Position the clamp on your desired handlebar location. Hand-tighten the screw to fix the phone holder onto the handlebar. The holder comes with 2 silicone gaskets; use them as needed to achieve a snug fit for handlebars with a diameter of 1.5 to 3.5 cm.
- Engage Security Lock: Once the holder is mounted, ensure the security lock at the rear is engaged to prevent accidental detachment.
Visual guide for the three-step installation process: inserting the base, tightening the clamp, and engaging the security lock.
The holder is compatible with handlebars ranging from 15mm to 35mm in diameter, suitable for various vehicles.
Operating Instructions
Using your Glangeh B6 Phone Holder is straightforward:
- Inserting Your Phone: Gently pull open the holder's arms and place your smartphone inside. The reinforced silicone cushions will securely grip your device.
- Securing Your Phone: Once the phone is in place, push the security lock at the back to firmly clamp your phone. This prevents movement during high-speed rides or on rough terrain.
- Adjusting Viewing Angle: The holder features a 360-degree rotating ball joint. Loosen the nut adjustment slightly, rotate your phone to your preferred horizontal or vertical viewing angle, and then re-tighten the nut to secure the position.
- Removing Your Phone: To remove your phone, simply disengage the security lock and gently pull your phone out. The quick-release design allows for one-handed operation.
Demonstration of easy one-hand operation for inserting or removing a phone from the holder.
The 360-degree rotation allows for flexible viewing angles, both portrait and landscape.
Close-up of the security lock mechanism and the nut adjustment for securing the holder's angle.
Maintenance
To ensure the longevity and optimal performance of your Glangeh B6 Phone Holder, follow these simple maintenance guidelines:
- Cleaning: Wipe the holder regularly with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners, as these can damage the silicone and plastic components.
- Inspection: Periodically check all moving parts, screws, and the security lock for any signs of wear, looseness, or damage. Ensure the silicone cushions are intact and providing adequate grip.
- Storage: When not in use for extended periods, store the phone holder in a cool, dry place away from direct sunlight.
Troubleshooting
If you encounter any issues with your Glangeh B6 Phone Holder, refer to the following common problems and solutions:
- Phone is not secure:
- Ensure the security lock at the back of the holder is fully engaged.
- Verify that your phone's size (4.7-6.8 inches) and thickness (up to 15mm including case) are within the compatible range.
- Check if the silicone cushions are properly positioned and not damaged.
- Holder is loose on the handlebar:
- Re-tighten the handlebar clamp screw firmly.
- Ensure you are using the appropriate silicone gaskets to match your handlebar's diameter (1.5 to 3.5 cm).
- Rotation is too loose or too tight:
- Adjust the nut on the ball joint to achieve your desired tension for rotation. Tighten for more resistance, loosen for easier rotation.
- Compatibility Note: This bike holder is not compatible with the Samsung Galaxy S24 Ultra and other S Ultra series phones. Please check your phone model before use.
Product Specifications
| Feature | Specification |
|---|---|
| Brand | Glangeh |
| Model Number | B6 |
| Item Weight | 190 g |
| Product Dimensions (L x W x H) | 14.5 x 9 x 3.2 cm |
| Material | Silicone, Plastic, Nylon |
| Color | Orange |
| Mounting Type | Handlebar |
| Handlebar Diameter Compatibility | 1.5 to 3.5 cm |
| Compatible Phone Size | 4.7 to 6.8 inches |
| Max Phone Thickness (with case) | 15 mm |
| Special Features | Anti-collision, 8S Quick Installation, Rotatable, Adjustable, Secure Lock |
| Water Resistance Level | Waterproof |
| Weight Limit | 10 Kilograms |
| Country of Origin | China |
Warranty Information
Glangeh is committed to providing high-quality electronic accessories. For specific warranty details regarding your B6 Anti-Drop Phone Holder, please refer to the warranty card included in your product packaging or contact Glangeh customer support directly. Keep your proof of purchase for any warranty claims.
Customer Support
Should you have any questions, require assistance with installation, or need troubleshooting support, please do not hesitate to contact Glangeh customer service. Our dedicated team is ready to help you.
- Online Support: Visit the official Glangeh website for FAQs and support resources.
- Email Support: Refer to your product packaging or the Glangeh website for contact email addresses.
Glangeh is dedicated to providing excellent customer service.
