Tedeligo Wireless Remote Control Socket User Manual

Introduction

The Tedeligo Wireless Remote Control Socket provides a convenient way to control your electrical appliances. This system includes a 433 MHz wireless transmitter (remote switch) and a receiver (socket), designed for ease of use without requiring a Wi-Fi connection. The remote switch features a magnetic design, allowing it to be easily removed from its base for portable use or mounted on a wall.

Each remote control has a unique identification chip, ensuring that multiple sets of these wireless sockets can be used in the same area without interference. The system boasts a long control range and stable signal, even through walls, making it suitable for various indoor and outdoor applications.

Image: The Tedeligo wireless remote control socket and its accompanying switch, demonstrating its compact design and ease of handling.

Package Contents

• 1 x Wireless Remote Control Socket (Receiver)
• 1 x Wireless Remote Switch (Transmitter)
• 1 x CR2032 Battery (pre-installed in the remote switch)
• 1 x Double-sided adhesive tape (for switch base mounting)

Setup Instructions

1. Unpack the Device: Carefully remove the wireless remote control socket and switch from their packaging.
2. Initial Pairing (Pre-paired): The remote control and the socket are pre-paired at the factory. You can typically use them directly out of the box without any additional pairing steps.
3. Insert the Socket: Plug the wireless remote control socket into a standard wall outlet.
4. Connect Appliance: Plug the appliance you wish to control into the wireless remote control socket.
5. Test Functionality: Press the button on the wireless remote switch to turn the connected appliance ON or OFF.
6. Mounting the Remote Switch:
   • The remote switch features a magnetic adsorption design. It can be removed from its base for handheld use.
   • To fix the switch base to a wall, use the included double-sided adhesive tape. Ensure the surface is clean and dry before application.
   • Alternatively, the remote control can be magnetically attached directly to metal surfaces like a refrigerator.

Image: A visual guide illustrating the easy setup process, including the remote switch, socket, CR2032 battery, and the dimensions of the switch base.

Operating Instructions

Basic Operation

Once the socket is plugged in and an appliance is connected, simply press the button on the wireless remote switch to toggle the power of the connected appliance. One press will turn it ON, and another press will turn it OFF.

Control Range

The control distance can reach up to 30 meters (approximately 100 feet) indoors and 100 meters (approximately 330 feet) outdoors. The signal is effective even through walls, providing flexible placement options for your remote switch.

Image: An illustration demonstrating the effective control range of the wireless remote, showing it can operate appliances from a distance, even across different rooms or floors.

Multiple Control Methods

You can control the connected appliance in two ways:

1. Directly on the Socket: The receiver socket has a manual ON/OFF button. Press this button to control the power of the connected appliance directly at the socket.
2. Using the Remote Switch: Use the portable wireless remote switch to control the appliance from a distance.

Image: A depiction of the two available control methods: a manual button on the socket itself and the wireless remote switch, offering flexibility in operation.

Adding More Remote Switches (Pairing)

The wireless socket can memorize approximately 20 remote controls. If you wish to add more remote switches to control the same socket, follow these steps:

1. Plug the receiver socket into a power outlet.
2. Press and hold the manual button on the receiver socket for approximately 3-5 seconds until the indicator light starts flashing.
3. While the indicator light is flashing, press the button on the new remote switch you wish to pair.
4. The indicator light on the socket will stop flashing and remain solid for a moment, then turn off, indicating successful pairing.
5. Test the new remote switch to ensure it controls the socket.

To clear all paired remote controls from the socket, press and hold the manual button on the receiver socket for approximately 10-15 seconds until the indicator light flashes rapidly and then turns off. This will reset all pairings.

Maintenance

Cleaning

• Ensure the device is unplugged from the power source before cleaning.
• Wipe the surfaces of the socket and remote switch with a soft, dry cloth.
• Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the device.

Battery Replacement (Remote Switch)

The wireless remote switch uses a CR2032 battery. The battery has a long lifespan, supporting approximately 5000 uses. When the remote switch's performance degrades or stops working, it may be time to replace the battery.

1. Locate the battery compartment on the back of the remote switch.
2. Use a small tool (like a coin) to gently open the battery compartment cover.
3. Remove the old CR2032 battery.
4. Insert a new CR2032 battery with the positive (+) side facing up.
5. Close the battery compartment cover securely.

The button on the remote switch is designed for durability, with a lifespan of 100,000 cycles.

Troubleshooting

Specifications

Warranty and Support

This Tedeligo product has passed CE and FCC verification, ensuring its safety and quality. For any issues, questions, or support needs, please refer to the seller's contact information or the platform where the product was purchased. Please retain your proof of purchase for warranty claims.

The product is designed to be safe and convenient for all users, including children and the elderly.